• 한국도로학회:학술대회논문집
• /
• 2003.10a
• /
• pp.189-192
• /
• 2003

• 한국도로학회:학술대회논문집
• /
• 2003.10a
• /
• pp.83-90
• /
• 2003

• 한국도로학회:학술대회논문집
• /
• 2003.10a
• /
• pp.103-108
• /
• 2003

• 한국방재학회:학술대회논문집
• /
• 2008.02a
• /
• pp.305-308
• /
• 2008

This paper describes a research study on the durability and strength properties of thin quiet-permeable asphalt concrete. Such asphalt mixes have high porosity, which offers significantly better drainages than normal mix designs. However, these materials also exhibit poor durability and strength limiting their use in pavement application. To remedy this, fiber and polymer modifiers have been proposed. All samples were added to modified binder which were prepared with or without the modifiers and fiber using Marshall mix procedures and were experimentally tested using various standardized testing procedures including percent air void for porosity, cantabro test and marshall stability. In general, the results of marshall stability showed that modified mixtures were equivalent to unmodified mixtures. Especially, the result of cantabro tested modified mixtures was superior to unmodified mixtures.

• 한국방재학회:학술대회논문집
• /
• 2008.02a
• /
• pp.313-316
• /
• 2008

Temperature reduction in the manufacturing of asphalt mixtures is highly desirable from a number of aspects. Reduced fumes and emissions, and reduced energy consumption, are important environmental reasons to continue pursuing the goal of temperature reduction. There are important construction and performance advantages as well. For instance, improved workability results in better compaction; lower production and placement temperatures may improve prospects for cold weather paving; and lower temperatures will result in less binder aging and possibly better cracking resistance. The performance of WMA is not to be satisfied though there are various advantages. Therefore, more research is needed on a number of issues

• International Journal of Highway Engineering
• /
• v.18 no.2
• /
• pp.29-36
• /
• 2016

PURPOSES: The objective of this study is to determine the milling temperature that minimizes the binder-induced damage to the aggregate; this is achieved by evaluating the temperature dependence of the viscosity of the asphalt binder, with the aim of developing an effective heating process for warm in-place recycling. METHODS : The validity of the indoor test was confirmed by conducting an internal heating test based on the on-site heating test. In addition, the adhesive power of the binder was measured at various temperatures ($30^{\circ}C$, $40^{\circ}C$, $50^{\circ}C$, $60^{\circ}C$, $70^{\circ}C$) via three types of measuring methods. RESULTS: The surface temperature spectrum of field test was slight different with that of laboratory test. But, the spectra of inner temperature between the field and the laboratory was almost similar. Also, the adhesion of the asphalt binder was measured from $30^{\circ}C$ to $70^{\circ}C$. The adhesion of the binder was significantly decreased from $60^{\circ}C$. Contrary to other temperature, the adhesion was slightly changed from $60^{\circ}C$ to $70^{\circ}C$. Also the inner temperature between two different heating methods was shown similar temperature spectra. CONCLUSIONS: The pavement heating temperature spectrum of hot in place recycling method was simulated by a laboratory test. Based on this study, the optimum temperature was $60^{\circ}C{\sim}70^{\circ}C$ for reducing aggregate damage during milling process. The susceptibility heating method developed in this study can be maintained the optimum inner temperature range.

• Geotechnical Engineering
• /
• v.12 no.3
• /
• pp.17-34
• /
• 1996

The objective of this paper is to evaluate the asphalt mixture performance with pyrolyzed carbon black(CBP) and air -cooled iron blast furnace slag. Marshall mix design was performed to determine the optimum binder content, The optimum binder content ranged from 6.3 percent to 7.75 percent. Dynamic creep testing was carried out using mixtures at the optimum binder content. Based on the test results, the use of pyrolyzed carbon black and slag in the asphalt pavement showed a positive result, such as the increase of Marshall stability, the decrease of the strain rate and the decrease in the mix stiffness rate at high temperature(5$0^{\circ}C$) and 137.9 kPa confinement. Within the limits of this research. it was concluded that pyrolyzed carbon black as an additive and slag as a coarse aggregate could be used to produce an asphalt paving mixture that has good stability, stiffness, and rutting resistance.

• International Journal of Highway Engineering
• /
• v.3 no.2 s.8
• /
• pp.91-102
• /
• 2001

On the basis of several experiments peformed, Bahia et al. (1998) concluded that the current Superpave PG-grading system failed to characterize grading specification of fill modified binders. This conclusion motivates us to investigate the correct grating system suited for modified asphalt binders. The main concept of this development is originated from the relationship between rut depth and binder properties at high temperatures. A new grading system for modified asphalt binders suggested here somewhat resembles to the unmodified binder grading one developed by Huh et al. (2000). Thus, this investigation will provide a unified single theoretical equation of high temperature grading that can apply both to modified and unmodified binders, and will check its effectiveness with the laboratory and the field rut data reported by independent studies. Successful results observed may allow to construction of a correct grading system in the near future.

• International Journal of Highway Engineering
• /
• v.2 no.3
• /
• pp.129-144
• /
• 2000

This paper presents the characteristics of viscoelastic properties and fatigue performance of SBS modified asphalt mixtures depending on the aggregate gradation. Dynamic shear rheometer (DSR) and uniaxial tensile creep tests are performed to analyze the thermomechanical behavior of asphalt binders and mixtures, respectively. Uniaxial tensile fatigue tests for seven different asphalt mixtures are conducted to evaluate the effects of aggregate gradations and SBS modifier on the fatigue performance of the mixtures. DSR and uniaxial tensile creep tests results show that the SBS modified asphalt mixtures have better rutting resistance than the unmodified mixtures at high temperatures regardless of the aggregate gradations used. Fatigue factor $G^*sin\delta$ in Superpave binder specification may not be adequate for evaluating the fatigue Performance of asphalt mixtures. It is observed from uniaxial tensile fatigue tests that SBS modified asphalt mixtures compared to unmodified mixtures have ten times longer fatigue lives regardless of the aggregate gradations(dense, SMA, and Superpave gradations) used in the mixtures. The better fatigue performance of the SBS modified mixtures is observed even after long-term aging process. The effect of aggregate gradations on the fatigue performance is not as significant as the SBS modifier. The cellulose fiber added in the SMA mixture has negligible effects on the viscoelastic Properties and fatigue performance of the mixture, but is effective in reducing draindown. Although the SBS modified asphalt binder is used, it may be necessary to add the cellulose fiber into the SMA mixture to prevent the draindown.

• International Journal of Highway Engineering
• /
• v.16 no.4
• /
• pp.45-50
• /
• 2014

PURPOSES : The objective of this study is to analyze the performance of anti-stripping agent depending on its type and content to reduce pothole, an increasing pavement distress due to abnormal climate intensity. METHODS : In the past years, U.S and many countries in Europe use hydrated lime and liquid anti-stripping agent in asphalt mixtures. Hydrated lime or liquid anti-stripping agent is substituted for filler and binder, respectively, to improve the anti-stripping property of asphalt mixtures. To investigate this, indirect tensile strength test was performed and TSR values were compared for different content of hydrated lime and types of liquid anti-stripping agent in asphalt mixture. RESULTS : Test results indicate that hydrated lime remarkably increased the asphalt mixture performance on anti-stripping denoted by the increased in TSR values from 55% to 100%. Liquid anti-stripping agent also increased the value of TSR but not significant. In addition, depending on the types of aggregate, TSR values and effect of liquid anti-stripping were different. CONCLUSIONS : Using anti-stripping agents improve the anti-stripping property of asphalt mixture especially hydrated lime; however, more experiments should be conducted to improve the reliability about the effect of liquid anti-stripping agent.