• 대한기계학회논문집
• /
• 제5권4호
• /
• pp.329-337
• /
• 1981

Natural convection within inclined high aspect-ratio rectangular cavity was analysed by using finite element method. For a cavity of sapect-ratio 20, the flow patterns of secondary vortices and the heat transfer characteristics on the wall were obtained with the variation of tilt angle as well as Ra and Pr. The observation on the governing equations shows that the increase of Ra/Pr and the existence of nonzero tilt angle make the flow pattern more complicated and so it becomes difficult to obtain converging solution. The max. value of Ra/Pr attained in this study was 3x10$\^$4/at 0$\^$0/ tilt angle and 1.1x10$\^$4/ at 45.deg. tilt angle for aspect ratio 20and Pr=0.7. Finally an empirical formula for Nusselt number which can accout for the effect of tilt angle is obtained for laminar flow regime.

• 대한기계학회논문집
• /
• 제16권5호
• /
• pp.974-982
• /
• 1992

본 연구에서는 Wheel 미립화기로 CWM을 분사시켰을때 Vane의 형태가 혼합연료 방울의 크기분포에 미치는 영향을 실험적으로 연구하는 것이며 그 연구 내용을 요약하 면 다음과 같다. .Vane의 형상계수(Aspect ratio)가 연료방울의 크기분포에 미치는 영향 .Vane의 각도가 연료방울의 크기분포에 미치는 영향 .미분탄 부하도와 연료방울의 SMD변화 .미분탄 분포의 평균크기변경에 따른 연료방울의 SMD변화 위에서 형상계수라함은 Vane의 출구직경(d)와 Vane의 출구길이 (L)의 비(L/d)를 의미 하고 있다.

• 치과방사선
• /
• 제15권1호
• /
• pp.59-66
• /
• 1985

The Purpose of this study is to detect morphological changes of the maxilla following the operation of paranasal sinuses in the orthopantomogram. 1) The measurement of the angle set up by two reference lines which represent posterior aspect of the maxilla and skull base was made. 2) The mean angle in the post-operative patients showed significantly smaller than that in the normal subjects. 3) The forms of posterior aspect of maxilla were classified into 5 types. (flat, convex, concave, uneven and obliterated.) 4) In contrast with the convex type in the majority of normal subjects, approximately half of the post-operative patients showed the concave type. 5) These results may suggest that the superior part of the posterior aspect of the maxilla tend to depress following the operation of these paranasal sinuses.

• 한국진공학회지
• /
• 제15권4호
• /
• pp.387-394
• /
• 2006

본 연구에서는 반응성 이온빔을 low-angle forward reflection으로 생성시킨 중성빔을 이용하여 Aspect Ratio Dependent Etching (ARDE) 현상이 제거되는 효과에 대하여 연구하였다. SF6 가스를 사용하여 Inductively Coupled Plasma system과 이온빔으로 각각 poly-Si 을 식각한 결과 ARDE 현상을 관찰할 수 있었으며, Si 기판위에 증착된 Poly-Si을 식각하는 것보다 $SiO_2$ 기판 위에 증착된 Poly-Si을 식각하는 것이 ARDE 현상이 더 많이 나타난다는 것을 관찰할 수 있었다. 반면에 같은 공정 조건에서 중성빔으로 poly-Si을 식각한 결과 이러한 ARDE 현상이 효과적으로 제거되었음을 관찰할 수 있었다. 중성빔을 이용하여 ARDE 현상이 제거되는 원리는 2 차원의 XOOPIC code 와 TRIM code를 사용하여 여러가지 나노스케일의 형상을 컴퓨터 시뮬레이션하여 증명하였다.

• 한국의류학회지
• /
• 제28권6호
• /
• pp.776-783
• /
• 2004

The purpose of this study was to identify the reasonable gathering conditions as consider of effect of gathering and variation of silhouette made by gathering conditions. The experimental design consists of four factorial design: (1) three kinds of different weight and different thickness fabrics (2) three kinds of different stitch densities (3) five kinds of different ratio of gathers (4) three kinds of different angles. Therefore one hundred thirty five (135) samples were made. Data analysis utilize SPSS WIN 10.0 Package. The results of this study were as follows: 1. In the aspect of fabrics, it is shown the visual propriety that it is as thin as the small stitch, and as thick as the big stitch. 2. As stitch densities, it shows the different stabilized nodes. 3. In the aspect of ratio of gathers, it is shown the visual propriety that a few was small stitches, which help formations of nodes, and a lot were big stitches, which help increased the effect of gather. 4. In the aspect of angle of bias, the drape appearance was excellent as a sample of cutting by 0 angle(0$^{\circ}$) of bias. The big stitches that help formations of stabilized nodes, and a case of cutting by 45 angle(45$^{\circ}$) of bias was small stitch.

• Steel and Composite Structures
• /
• 제23권6호
• /
• pp.737-746
• /
• 2017

In this paper the influence of aspect ratio, height ratio and material angle on static and free vibration behaviour of orthotropic elliptic paraboloid shells is studied by using a four-node hybrid stress finite element. The formulation of the element is based on Hellinger-Reissner variational principle. The element is developed by combining a hybrid plane stress element and a hybrid plate element. A parametric study is carried out for static and free vibration response of orthotropic elliptic paraboloid shells with respect to displacements, internal forces, fundamental frequencies and mode shapes by varying the aspect and height ratios, and material angle.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.1485-1490
• /
• 2003

This paper is the analysis of thermal and fluid in solar concentration absorber with various tilt angle and opening ratio of absorber entrance. The purpose of this study is to develop optimum solar concentration absorber, and the parameters for the study are the opening ratio of absorber entrance and the tilt angle. The aspect ratio of absorber was fixed at 0.64, and opening ratio was changed from 0.1 to 1.0. The finite volume method with SIMPLE computational algorithm are used and analyzed the heat transfer in absorber inside walls.

• The Journal of the Acoustical Society of Korea
• /
• 제25권3E호
• /
• pp.101-109
• /
• 2006

Besides dorsal-aspect target strength (TS) of the fish, side-aspect TS information is also acoustically important parameter in fisheries acoustics. In this study, the side-aspect TS of 11 black sea bream (Acanthopagurus schlegeli) were measured using a split beam echosounder of 120, 200, and 420 kHz; total length of the fish ranged from 12.4 to 23.7 cm, and wet weight from 27.5 to 229.8g. For the precise TS measurement with side-aspect angle, we used anesthetized and tethered specimens of known size while being rotated through $360^{\circ}C$ by means of a carousel structure. The side-aspect TS measurements of the fish were conducted by rotating the fish in the horizontal plane at 50 interval. The ping interval was 0.2 second and elapsed time at each angle was 30-60 second. As a result, the measured side-aspect TS data were fitted by sinusoidal function. The relationships between fish length and near full side-aspect TS were as follows: $TS_{120kHz}= 21.46 log (TL)-67.5 (r = 0.70), \;TS_{200 kHz}= 31.03 log (TL)-76.9 (r=0.83),\;TS_{420 kHz}= 30.79 log (TL)-72.2 (r = 0.77)$. For comparison, theoretically estimated side-aspect TS from the Kirchhoff ray mode (KRM) model, which based on swimbladder and body morphology, were compared with the measured TS.

• 대한기계학회논문집
• /
• 제16권3호
• /
• pp.555-568
• /
• 1992

본 연구에서는 상기 연구의 연장으로서 내부 Rayleigh수가 1*$10^{4}$~1.5 *$10^{5}$ 범위 일때 Prandtl수가 6.05인 내부발열유체에 의해 자연대류가 일어나는 밀폐공간에서 종회비가 1/2, 1/3, 및 1/4로 변화할 때 유동, 온도분포 및 열전달특성 을 수치적인 방법 및 실험적인 방법으로 연구하였다.

• 한국전자파학회논문지
• /
• 제28권2호
• /
• pp.129-138
• /
• 2017

본 논문에서는 지상레이다가 추적 중인 항공기로부터 획득한 수신신호를 이용하여 도플러 형상(signature)을 추출하였다. 이를 위해 펄스열(pulse train) 파형의 수학적 모델로부터 레이다의 도플러 해상도를 검증하고, 비행 중인 항공기 도플러 형상이 엔진에 대한 레이다 측각(aspect angle)과 엔진의 제원에 따라 결정됨을 보였다. 이를 확인하기 위해 비행 중인 항공기에서 반사된 레이다 수신신호를 레이다 수신신호 저장장치를 이용하여 획득하고, 수신신호로부터 도플러 형상을 추출한 후, 항공기 추적 정보로부터 엔진에 대한 레이다 측각을 추정하였다. 이들 결과를 조합하여 측각에 대한 상대 도플러 형상 차이를 확인하고, 레이다에 사용가능한 표적인식용 도플러 프로파일을 제안하였다.