• 한국식생활문화학회지
• /
• 제25권6호
• /
• pp.810-819
• /
• 2010

The objective of this study was to produce muffins with added dukeum ramie leaf powder and to compare them to a control. We used two different optimal composition ratios to produce muffins. The physical and sensory characters were varied by changing the ratio of dukeum ramie leaf powder, butter, and sugar to identify a critical value using response surface regression analysis. The ranges for the added dukeum ramie leaf powder, sugar, and butter were 15-35, 60-100, and 60-100 g, respectively. Muffins with added dukeum ramie leaves had comparable mineral and antioxidant vitamin compositions to those of dried ramie leaves. Muffins with added dukeum ramie leaf powder satisfied the suitability of the model, showing a p-value within 5% of significance level (p<0.05) for every aspect Volume and height differed without any association to ingredients. Lightness increased when less dukeum ramie leaf powder was added with more butter and sugar, redness increased when more dukeum ramie leaf powder and sugar were added with 70-80 g of butter, whereas yellowness increased when less dukeum ramie powder was added. Texture and toughness increased when less dukeum ramie leaf powder was added. The degree of gumminess and chewiness depended hugely on the amount of sugar. Cohesiveness, decreased with more dukeum ramie leaf powder and butter, whereas hardness increased with a medium range of ingredients. Sensory character increased with less dukeum ramie powder, and overall quality increased with more butter and sugar, but depended on the amount of added dukeum ramie power. The critical values from the sensory characteristics showed that 27 g of dukeum ramie powder, 72 g of sugar, and 86 g of butter was optimum.

• 대한토목학회논문집
• /
• 제30권3D호
• /
• pp.313-321
• /
• 2010

본 연구는 부산시의 주택순환과정을 살펴보기 위해 가구의 생애주기에 따른 주거이동 특성을 분석하였는데, 설문조사는 부산시 거주 만 40세 이상의 성인들을 대상으로 결혼 이후 현재까지의 주거이동에 대한 주거경력을 조사하였다. 통계자료 분석의 결과와 설문조사 결과는 모든 항목에서 유사한 결과를 보였는데 이를 정리하면 다음과 같다. 설문대상자들이 현재 거주하고 있는 주택을 살펴보면, 주택유형은 아파트가 절대적으로 높은 비율을 차지하고 있으며, 주택의 점유형태는 자가소유이며, 주택규모는 30평형대, 거주기간은 6년 이상 10년 미만이다. 주택자금마련 방법은 저축과 은행대출이 대다수를 차지하고 있는데, 현재 가구의 소득만으로는 자가소유의 희망주택을 마련하는 것이 불가능함에도 불구하고 주택금융을 활용하여 내집마련을 하는 주거문화는 임대료를 지불하고 임차소유를 하는 외국과는 다소 다른 우리의 주거문화이다. 그러나 주거만족도의 측면에서 주거이동은 주택규모를 확장시키고 점유형태를 변화시켰기 때문에 주거이동으로 인해 대부분의 가구가 주거의 질이 향상되었다고 인식하고 있으며, 현재의 주거에 대해 매우 높은 만족감을 보인다.

• 한국지형학회지
• /
• 제27권3호
• /
• pp.53-73
• /
• 2020

Morphology and grain size distribution of coastal dunes should be well documented because they are critical to dune's buffering capacity and resilience against storm surges. The nationwide coastal dune survey produced the dataset, including beach-dune topographic profiles and grain size parameters for frontal beaches, foredunes, and inland dunes. This research investigated the dataset to describe geomorphic and textural properties of coastal dunes: foredune slopes, dune heights above approximately highest high water, mean size, and sorting, together with associated variables of coastal setting that influence coastal dunes. It also explores the possibility of a dune type scheme based on gran size trends. The results are as follows. First, the coast in which dunes are developed is the primary control on foredune morphology and sediment texture. Coastal dunes on the east coast were developed more alongshore rather than inland, with gentler slopes on the higher ground and out of coarser sand. The shore aspect contributes to this pattern because the east coast cannot benefit from prevailing northwesterly. Second, grain size trends from beaches through foredunes to inland dunes were little identified. Third, 12 dune types were identified from 69 dunes, showing the indicative capability for the status of beaches and dunes. We confirmed that the dataset could increase our understanding of the overall characteristics of coastal dune morphology and texture, though there is something to be improved, for example, establishing the refined and comprehensive field survey protocol.

• 한국지형학회지
• /
• 제27권3호
• /
• pp.87-103
• /
• 2020

The purpose of this study is to evaluate the risk of cropland and man-made infrastructures in a landslide-prone area using a GIS-based method. To achieve this goal, a landslide inventory map was prepared based on aerial photograph analysis as well as field observations. A total of 550 landslides have been counted in the entire study area. For model analysis and validation, extracted landslides were randomly selected and divided into two groups. The landslide causative factors such as slope, aspect, curvature, topographic wetness index, elevation, forest type, forest crown density, geology, land-use, soil drainage, and soil texture were used in the analysis. Moreover, to identify the correlation between landslides and causative factors, pixels were divided into several classes and frequency ratio was also extracted. A landslide susceptibility map was constructed using a bayesian predictive model (BPM) based on the entire events. In the cross validation process, the landslide susceptibility map as well as observation data were plotted with a receiver operating characteristic (ROC) curve then the area under the curve (AUC) was calculated and tried to extract a success rate curve. The results showed that, the BPM produced 85.8% accuracy. We believed that the model was acceptable for the landslide susceptibility analysis of the study area. In addition, for risk assessment, monetary value (local) and vulnerability scale were added for each social thematic data layers, which were then converted into US dollar considering landslide occurrence time. Moreover, the total number of the study area pixels and predictive landslide affected pixels were considered for making a probability table. Matching with the affected number, 5,000 landslide pixels were assumed to run for final calculation. Based on the result, cropland showed the estimated total risk as US $ 35.4 million and man-made infrastructure risk amounted to US $ 39.3 million.

• 한국지형학회지
• /
• 제27권2호
• /
• pp.65-80
• /
• 2020

This paper deals with risk assessment of life in a landslide-prone area by a GIS-based modeling method. Landslide susceptibility maps can provide a probability of landslide prone areas to mitigate or proper control this problems and to take any development plan and disaster management. A landslide inventory map of the study area was prepared based on past historical information and aerial photography analysis. A total of 550 landslides have been counted at the whole study area. The extracted landslides were randomly selected and divided into two different groups, 50% of the landslides were used for model calibration and the other were used for validation purpose. Eleven causative factors (continuous and thematic) such as slope, aspect, curvature, topographic wetness index, elevation, forest type, forest crown density, geology, land-use, soil drainage, and soil texture were used in hazard analysis. The correlation between landslides and these factors, pixels were divided into several classes and frequency ratio was also extracted. Eventually, a landslide susceptibility map was constructed using a logistic regression model based on entire events. Moreover, the landslide susceptibility map was plotted with a receiver operating characteristic (ROC) curve and calculated the area under the curve (AUC) and tried to extract a success rate curve. Based on the results, logistic regression produced an 85.18% accuracy, so we believed that the model was reliable and acceptable for the landslide susceptibility analysis on the study area. In addition, for risk assessment, vulnerability scale were added for social thematic data layer. The study area predictive landslide affected pixels 2,000 and 5,000 were also calculated for making a probability table. In final calculation, the 2,000 predictive landslide affected pixels were assumed to run. The total population causalities were estimated as 7.75 person that was relatively close to the actual number published in Korean Annual Disaster Report, 2006.

• Nuclear Engineering and Technology
• /
• 제55권10호
• /
• pp.3775-3786
• /
• 2023

Mixing Vane Grid (MVG) is one of the most important structures in fuel assembly due to its high performance in mixing the coolant and ultimately increasing Critical Heat Flux (CHF), which avoids the temperature rising suddenly of fuel rods. To evaluate the mixing performance of the MVG, a Total Diffusion Coefficient (TDC) mixing coefficient is defined in the subchannel analysis code. Conventionally, the TDC of the spacer grid is obtained from the combination of experiments and subchannel analysis. However, the processing of obtaining and determine a reasonable TDC is much challenging, it is affected by boundary conditions and MVG geometries. In is difficult to perform all the large and costing rod bundle tests. In this paper, the CFD method was applied in TDC analysis. A typical 5 × 5 MVG was simulated and validated to estimate the mixing performance of the MVG. The subchannel code was used to calculate the TDC. Firstly, the CFD method was validated from the aspect of pressure drop and lateral temperature distribution in the subchannels. Then the effect of boundary conditions including the inlet temperature, inlet velocities, heat flux ratio between hot and cold rods and the arrangement of hot and cold rods on MVG mixing and TDC were studied. The geometric effects on mixing are also carried out in this paper. The effect of vane pattern on mixing was investigated to determine which one is the best to represent the grid's mixing performance.

• Design & Manufacturing
• /
• 제17권3호
• /
• pp.48-54
• /
• 2023

In this study, an injection mold with ultra-small surface properties was manufactured using nanosecond laser processing. A superhydrophobic characteristic analysis was performed on the PET specimen manufactured through this. To this end, a hydrophobic pattern was defined using the Cassie-Baxter model. The defined features were selected with a spot diameter of 25um and pitch spacing of 30um and 35um. As a result of the basic experiment, it was confirmed that the fine pattern shape had an aspect ratio of 1:1 when the pitch interval was 35um and 20 iterations. Through the determined processing conditions, a hydrophobic pattern was implemented on the core surface of KP4. A specimen with a hydrophobic pattern was produced through injection molding. The height of the molded hydrophobic pattern is 20 ㎛ less than the depth of the core and the contact angle measurement results are 92.1°. This is a contact angle smaller than the superhydrophobic criterion. Molding analysis was performed to analyze the cause of this, and it was analyzed that the molding was not molded due to the lack of pressure in the injection machine.

• Advances in nano research
• /
• 제16권2호
• /
• pp.111-125
• /
• 2024

Recently, a lot of research has been done on the analysis of axial vibrations of homogeneous and FG nanotubes (nanorods) with various aspects of vibrations that have been fully mentioned in history. However, there is a lack of investigation of the dynamic internal resonances of FG nanotubes (nanorods) between them. This is one of the essential or substantial characteristics of nonlinear vibration systems that have many applications in various fields of engineering (making actuators, sensors, etc.) and medicine (improving the course of diseases such as cancers, etc.). For this reason, in this study, for the first time, the dynamic internal resonances of FG nanorods in the simultaneous presence of large-amplitude size dependent behaviour, inertial and shear effects are investigated for general state in detail. Such theoretical patterns permit as to carry out various numerical experiments, which is the key point in the expansion of advanced nano-devices in different sciences. This research presents an AFG novel nano resonator model based on the axial vibration of the elastic nanorod system in terms of derivation from large-amplitude size dependent internal modals interactions. The Hamilton's Principle is applied to achieve the basic equations in movement and boundary conditions, and a harmonic deferential quadrature method, and a multiple scale solution technique are employed to determine a semi-analytical solution. The interest of the current solution is seen in its specific procedure that useful for deriving general relationships of internal resonances of FG nanorods. The numerical results predicted by the presented formulation are compared with results already published in the literature to indicate the precision and efficiency of the used theory and method. The influences of gradient index, aspect ratio of FG nanorod, mode number, nonlinear effects, and nonlocal effects variations on the mechanical behavior of FG nanorods are examined and discussed in detail. Also, the inertial and shear traces on the formations of internal resonances of FG nanorods are studied, simultaneously. The obtained valid results of this research can be useful and practical as input data of experimental works and construction of devices related to axial vibrations of FG nanorods.

• Structural Engineering and Mechanics
• /
• 제89권6호
• /
• pp.557-570
• /
• 2024

Due to interfacial ageing, chemical action and interfacial damage, the interface debonding may appear in the interfaces of composite laminates. Particularly, the laminates display a side-dependent effect at small scale. In this work, a three-dimensional (3D) and anisotropic thick nanoplate model is proposed to investigate the effects of imperfect interface and nonlocal parameter on the bending deformation, vibrational response and buckling stability of one-dimensional (1D) hexagonal quasicrystal (QC) layered nanoplates. By combining the linear spring model with the transferring matrix method, exact solutions of phonon and phason displacements, phonon and phason stresses of bending deformation, the natural frequencies of vibration and the critical buckling loads of 1D hexagonal QC layered nanoplates are derived with imperfect interfaces and nonlocal effects. Numerical examples are illustrated to demonstrate the effects of the imperfect interface parameter, aspect ratio, thickness, nonlocal parameter, and stacking sequence on the bending deformation, the vibrational response and the critical buckling load of 1D hexagonal QC layered nanoplate. The results indicate that both the interface debonding and nonlocal effect can reduce the stiffness and stability of layered nanoplates. Increasing thickness of QC coatings can enhance the stability of sandwich nanoplates with the perfect interfaces, while it can reduce first and then enhance the stability of sandwich nanoplates with the imperfect interfaces. The biaxial compression easily results in an instability of the QC layered nanoplates compared to uniaxial compression. QC material is suitable for surface layers in layered structures. The mechanical behavior of QC layered nanoplates can be optimized by imposing imperfect interfaces and controlling the stacking sequence artificially. The present solutions are helpful for the various numerical methods, thin nanoplate theories and the optimal design of QC nano-composites in engineering practice with interfacial debonding.

• 헤리티지:역사와 과학
• /
• 제53권1호
• /
• pp.24-33
• /
• 2020

출토 청동 유물에서는 매장 환경 내 공존하는 복합적인 부식 인자로 인해 다양한 형태와 색상의 부식 생성물이 관찰되며, 이러한 부식 생성물은 장기 부식의 정보뿐만 아니라 보존처리 시 중요한 자료가 될 수 있다. 따라서 청동 유물의 부식층 및 부식 생성물에 대한 과학적 분석을 실시하여 부식층 형성 과정 및 부식 생성물의 특성을 규명하고, 노출된 매장 환경의 특성 및 내부 부식 인자와의 연관성을 해석하는 연구가 필수적이다. 본 연구에서는 동일 유적에서 출토된 청동 유물을 합금비와 제작기법에 따라 분류 후, 표면·부식층·부식 생성물에 대한 종합적인 분석을 실시하여 청동 유물의 부식 메커니즘과 부식층 형성 과정, 부식 생성물의 특성에 대해 알아보고자 하였다. 분석 대상으로 선정된 총 5점의 시료는 합금비 및 제작기법 분석 결과에 따라 2개의 그룹으로 구분되는데, Cu-Sn-Pb합금으로 열처리가 진행되지 않은 Group 1은 내·외측 중 일부 또는 양측에 외부 부식층이 형성되어 있으며, 표면은 녹색 또는 청색으로 확인되었다. 소지 금속에서는 α상, α+δ상 선택 부식이 일어나는 것을 알 수 있었으며, α+δ상 선택 부식 후 빈 공간에 순도가 98% 이상인 Cu가 농축되어 있는 현상이 확인되었다. Cu-Sn합금으로 열처리가 진행된 Group 2는 외부 부식층이 형성되지 않았으며, 표면이 어두운 황색으로 관찰되었다. 또한 Group 1과는 다르게 소지 금속 내부에서 α상 선택 부식이 발생한 것을 확인하였다. 연구결과를 종합해 볼 때 동일한 유적에서 출토된 청동 유물에서도 합금비 및 제작기법에 따라 부식층 형성과정 및 부식 생성물의 형태와 색상, 금속이온 이동경로 등 여러 측면에서 차이를 나타냄을 알 수 있다. 또한 동일 유물에서도 부분적으로 서로 다른 부식 특성을 보이기도 하는데 이는 매장 환경 내 노출 환경에 따라 다른 형태의 부식이 발생할 수 있음을 뜻한다. 따라서 동일 유적에서 출토된 청동 유물이라 하더라도 합금비, 제작기법, 노출 환경에 따라 부식 특성이 다를 것이라고 판단된다. 본 연구는 특정 지역 및 유물을 대상으로 한 부식 특성의 일면을 보여주는 것이므로 향후 여러 지역에서 출토되는 청동 유물의 부식층 및 부식 생성물 특성에 대한 연구를 통해 매장 환경에 따른 부식 메커니즘에 대한 심층적인 연구가 필요할 것으로 판단된다.