• 대한가정학회지
• /
• 제43권8호
• /
• pp.1-12
• /
• 2005

Ash solutions derived from vegetation have been known for their good mordanting action. They are used as finishing agents because they are able to promote dye uptake. It is expected that the types of ash solutions may have been different worker by worker since the workers have employed easy-to-get plants, when we reviewed old literature. However, the ash solutions are being used without clear distinctions between their characteristics. In this study, camellia ash solution and rice straw ash solution were prepared according to traditional methods. Using these solutions as mordanting agents, natural dyeing experiments with Caesdpinia Sappan were peformed. Following the dyeing procedure, the effect of the type of ash solution on the color of the dyed fabric was evaluated. The results showed that the ash solution mordanting effect us not dependent upon the components of the ash solution. It was also demonstrated that the mordanting effect was not based on the action of the metallic ions in the ash solution. The pH values of the ash solutions were adjusted in order to investigate the effect of changes in ash solution alkalinity on the dyeing process. The pH values ranged from neutral or weak acidity to the alkaline range in order to evaluate the characteristics of the mordanting tv the ash solutions.

• 한국의류학회지
• /
• 제22권6호
• /
• pp.609-609
• /
• 1998

This paper surveys the effect of rice straw ash solution to the physical properties of Sappan Wood dyeing fabrics. In the quantitative analysis of rice straw ash solution, the quantities of absorbed ingredients in fabrics were increased by bath pull treatment but the amount of absorption(K/S value) was increased by bath pH4.5 treatment. This is related to the metal ion. Among the metal ion, effect of Fe iou and Al ion were related. In case added extracted dye solution to mordants, the color dye solution became dark and increased reddish. The changes of mechanical properties of fabrics tensile resilience, bending rigidity(B), compressional resilience(RC) were increased. Generally mechanical properties were increased by rice straw ash solution treatment, specially bath pH9 treatment. Rice straw ash solution treatment of dyeing fabrics made the improvement in tensile strength and elongation and in the amount of absorption, dye ability, color fastness, mechanical properties, tensile strength, elongation.

• 한국의류학회지
• /
• 제22권6호
• /
• pp.699-705
• /
• 1998

This paper surveys the effect of rice straw ash solution to the physical properties of Sappan Wood dyeing fabrics. In the quantitative analysis of rice straw ash solution, the quantities of absorbed ingredients in fabrics were increased by bath pull treatment but the amount of absorption(K/S value) was increased by bath pH4.5 treatment. This is related to the metal ion. Among the metal ion, effect of Fe iou and Al ion were related. In case added extracted dye solution to mordants, the color dye solution became dark and increased reddish. The changes of mechanical properties of fabrics tensile resilience, bending rigidity(B), compressional resilience(RC) were increased. Generally mechanical properties were increased by rice straw ash solution treatment, specially bath pH9 treatment. Rice straw ash solution treatment of dyeing fabrics made the improvement in tensile strength and elongation and in the amount of absorption, dye ability, color fastness, mechanical properties, tensile strength, elongation.

• 복식문화연구
• /
• 제13권5호
• /
• pp.686-698
• /
• 2005

In this study, simultaneous mordanting method of dyeing in the Caesalpinia sappan dye liquor mixed with the rice straw ash solution was employed. The dyeing effects were compared and reviewed according to the changes of dyeing mechanisms of pre-mordanting and simultaneous mordanting using ash solutions. By the direct addition of the ash solution, the pH of the liquor was abruptly changed. In the case of maintaining the pH value of the ash solution at about 7 or 8, compared to the pre-mordanting, $a^{*}$ values increased and $b^{*}$ values decreased. As a result, it is highly desirable in terms of selective emphasis on the reddish hue. The color development, differentiated from that obtainable by the dyeing of chitosan pre-treated fabric, was obtained due to the effect of the water soluble chitosan component on the dyeing mechanism.

• 한국의류학회지
• /
• 제29권11호
• /
• pp.1465-1474
• /
• 2005

The primary purpose of this study is to investigate the differences in the characteristics of the mordants, synthetic aluminum mordants and ash solutions as natural mordants, used in Caesalpinia sappan dyeing. By introducing aluminum potassium sulfate in the ash solutions, the behavior of the aluminum in the ash solutions were observed. In the rice straw ash solutions, adjusted to the levels of pH6 and pH10, the aluminum potassium sulfate was introduced to achieve various concentration levels. From the analysis of the ash solution of pull, $K^+$ and $Na^+$ ion concentrations were found to be extremely high, while $Al^+$ ion concentration was 0. The color development in the Caesalpinia sappan dyeing by ash solution mordanting was found to be mainly governed not by the mordanting actions of the metallic ions but by those of alkali components. In the case of cotton, the application of pH10 ash solution promoted reddish color development compared to the case of non-mordanting, regardless of the aluminum potassium sulfate addition. In the case of silk, the application of pH10 ash solution increased a* value and decreased b* value compared to the case of non-mordanting.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제13권2호
• /
• pp.97-101
• /
• 2006

The efficacy of wood ash from Terminalia arjuna (arjun) and T. tomentosa (asan) has been tested against virosis of tasar silkworm, Antheraea. mylitta D. The Polyhedral Occlusion Bodies (POBs) of Cytoplasmic Polyhedrosis Virus of A. mylitta (AmCPV) were exposed to the aqueous solution (0.5 to 4%) of wood ash for 5 to 30 minutes. The treated suspension of POBs was orally inoculated once to tasar silkworm larvae after 24 hours of $1^{st}$ moult, and larvae reared in indoor on arjun leaves till spinning. The application of aqueous solution of wood ash has established its potential as antiviral agent against cytoplasmic polyhedrosis virus. Two percent aqueous solution of wood ash from arjun and asan dissolved the Polyhedral Occlusion Bodies (POBs) of cytoplasmic polyhedrosis virus of tasar silkworm and inactivated the virions within a short period of 20 to 30 minutes. In vivo efficacy of aqueous solution of wood ash resulted in reduction of larval mortality due to virosis. The mortality was reduced to $2.56{\pm}0.21\;and\;3.03{\pm}0.32%$ when treatment of 2.0% solution of wood ash of arjun and asan respectively were applied for 20 minutes, compared to inoculated control $(92.18{\pm}7.52%)$. No mortality was recorded when treatment of 2.5% solution of wood ash of arjun and asan were applied for 10 minutes or more.

• 환경위생공학
• /
• 제17권3호
• /
• pp.37-45
• /
• 2002

The Purpose of this study is to reduce environmental problems caused by landfill of bituminous coal fly ash emitted from the power plant and to reuse it. First of all, we experimented that Al and Si elements were extracted from fly ash and investigated that extracted Al and Si elements night use a coagulant. The extraction was carried out under various conditions ; concentration of the extraction solution, calcination temperature and calcination time. As the results, it was found that the optimum conditions of the extraction of Al and Si elements from fly ash were as follows, concentration of NaOH was 5N for both of them, calcination temperature was $700^{\circ}C$ and $600^{\circ}C$ and calcination time was 1hr and 1.5hr, respectively The extracted solution was used as a coagulant to treat the diluted metal-plating solutions which contained Pb and Cu, respectively. As the result of treatment on the diluted Pb-plating solution with 315NTU, the removal efficiency of turbidity was more than 90%, and the removal efficiency of Pb was about 80%. As for treatment of the non-turbid diluted Cu-plating solution, the removal efficiency of Cu was about 98%.

• 상하수도학회지
• /
• 제25권3호
• /
• pp.359-366
• /
• 2011

The feasibility of using volcanic ash for lead ion removal from wastewater was evaluated. The adsorption experiments were carried out in batch tests using volcanic ash that was treated with either NaOH or HCl prior to the use. Volcanic ash dose, temperature and initial Pb(II) concentration were chosen as 3 operational variables for a $2^3$ factorial design. Ash dose and concentration were found to be significant factors affecting Pb(II) adsorption. The removal of Pb(II) was enhanced with increasing volcanic ash dose and with decreasing the initial Pb(II) concentration. Pb(II) adsorption on the volcanic ash surface was spontaneous reaction and favored at high temperatures. Calculation of Gibb's free energy indicated that the adsorption was endothermic reaction. The equilibrium parameters were determined by fitting the Langmuir and Freundlich isotherms, and Langmuir model better fitted to the data than Freundlich model. BTV(base-treated volcanic ash) showed the maximum adsorption capacity($Q_{max}$) of 47.39mg/g. A pseudo second-order kinetic model was fitted to the data and the calculated $q_e$ values from the kinetic model were found close to the values obtained from the equilibrium experiments. The results of this study provided useful information about the adsorption characteristics of volcanic ash for Pb(II) removal from aqueous solution.

• 자원리싸이클링
• /
• 제2권4호
• /
• pp.23-26
• /
• 1993

This work is carried out to develop the recovery process of vanadium as vanadium pentoxide and nickel as nickel sulphate from the leaching solution of heavy oil fly ash. First, sodium chlorate solution was added to the leaching solution to oxidize vanadium ions. With adjusting pH of the solution and heating, vanadium ions(V) is hydrated and precipitated as red cake of $V_2O_5$ from the solution. After recovering vanadium, nickel is recovered as ammonium nickel sulfate with crystallization process. From this nickel salt, nickel sulfate which meets the specifications for the electroplating industry can be produced economically. More than 85% of vana-dium and nickel in the fly ash are recovered in this process.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 봄학술 발표회 논문집(II)
• /
• pp.433-436
• /
• 2005

The Fly-ash makes an Alumino-silicate gel when it mixes an alkali or a silicate solution. This Alumino-silicate gel is produced to the activation of an alkali silicate. And this act to the binder and makes a combine of particles. This study involved mechanical strengths of an Alumino-silicate Gel based the Fly-ash with an alkali solution. NaOH, KOH were utilized to an alkali solution. The alkali solution concentration was varied from 6 to 12M and the some added also the Meta-kaolin, Waterglass so that it made high the mechanical performance. Based on the experimental result, the compressive strengths increased as the quantity of the Meta-kaolin increased. And a mechanical strengths appeared according to the concentration of an alkali solution so that it was different. XRD, FT-IR have been used to characterize mechanical performance.