• Korean Journal of Materials Research
• /
• v.18 no.9
• /
• pp.463-469
• /
• 2008

Non-sintering cement was manufactured with briquette ash. Alkali activator for compression bodies used a NaOH solution. In order to apply alkali-activated briquette ash and the non-sintering cement to concrete, several experimental studies were performed. It was necessary to study the binder obtained by means of a substitute for the cement. This study concentrated on strength development according to the concentration of NaOH solution, the curing temperature, and the curing time. The highest compressive strength of compression bodies appeared as $353kgf/cm^2$ cured at $80^{\circ}C$ for 28 days. This result indicates that a higher curing temperature is needed to get a higher strength body. Also, geopolymerization was examined by SEM and XRD analysis after the curing of compression bodies. According to SEM and XRD, the main reaction product in the alkali activated briquette ash is aluminosilicate crystal.

• Journal of the Korea Concrete Institute
• /
• v.15 no.3
• /
• pp.497-503
• /
• 2003

Supplementary cementitious materials (SCM) such as fly ash, ground granulated blast furnace slag and silica fume are now being extensively used in concrete to control expansion due to alkali-silica reactivity (ASR). However, the replacement level of a single SCM needed to deleterious ASR expansion and cracking may create other problem and concerns. For example, incorporating silica fume at levels greater than 10％ by mass of cement may lead to dispersion and workability concerns, while fly ash can lead to poor strength development at early age, The combination of silica fume and fly ash in ternary cementitious system may alleviate this and other concerns, and result in a number of synergistic effects. The aim of the study was to enable evaluation of more realistic suitability of a silica fume-fly ash combination system for ASR resistance based on an in-house modification of ASTM C 1260 test method. The modification can be more closely identified with actual field conditions. In this study three different strengths of NaOH test solution(1N, 0.5N, and 0.25N) were used to measure the expansion characteristics of mortar bar made with a reactive aggregate. The other variable included longer testing period of 28 days instead of a conventional 14 days.

• Carbon letters
• /
• v.9 no.1
• /
• pp.1-7
• /
• 2008

The ability of cow dung ash without any pretreatment to remove color from textile dyes N Blue RGB, Green B and EOSIN YWS from aqueous solution has been investigated in this work. Cow dung ash, an ecofriendly and low cost adsorbent was prepared by burning cow dung cakes in the muffle furnace at $500^{\circ}C$. The adsorption was achieved under different pH and adsorbate concentration. The data was fitted to simple polynomial and the isotherms similar to Langmuir and Freundlich isotherms.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.05a
• /
• pp.136-137
• /
• 2021

The soda lime waste glass powder was dissolved in NaOH-4M solution to synthesize an alkaline activator, which was used to activate Class-C fly ash (FA). Compressive and flexural strength tests were conducted to determine the mechanical properties. Archimedes' principle was applied to measure the porosity of samples, (SEM-EDX) and XRD was used to study the microstructure and phase changes of samples. Through Inductive Coupled Plazma technique, the solution was found to increase the concentration of Si as the amount of dissolved glass powder was increased. Owing to the increased concentration of Si in an alkaline solution, the reactivity of FA was accelerated resulting in an increased strength and reduced porosity. Additionally, the dissolution of FA was improved as well as the formation of amorphous phases in the matrix was also enhances with the concentration of increased Si in an alkaline solution.

• Advances in concrete construction
• /
• v.6 no.4
• /
• pp.345-362
• /
• 2018

In this paper, mechanical and short-term durability properties of fly ash and slag based geopolymer concretes (FAGPC-SGPC) were investigated. The alkaline solution was prepared with a mixture of sodium silicate solution ($Na_2SiO_3$) and sodium hydroxide solution (NaOH) for geopolymer concretes. Ordinary Portland Cement (OPC) concrete was also produced for comparison. Main objective of the study was to examine the usability of geopolymer concretes instead of the ordinary Portland cement concrete for structural use. In addition to this, this study was aimed to make a contribution to standardization process of the geopolymer concretes in the construction industry. For this purpose; SGPC, FAGPC and OPC specimens were exposed to sulfuric acid ($H_2SO_4$), magnesium sulfate ($MgSO_4$) and sea water (NaCl) solutions with concentrations of 5%, 5% and 3.5%, respectively. Visual inspection and weight change of the specimens were evaluated in terms of durability aspects. For the mechanical aspects; compression, splitting tensile and flexural strength tests were conducted before and after the chemical attacks to investigate the residual mechanical strengths of geopolymer concretes under chemical attacks. Results indicated that SGPC (100% slag) is stronger and durable than the FAGPC due to more stable and strong cross-linked alumina-silicate polymer structure. In addition, FAGPC specimens (100% fly ash) showed better durability resistance than the OPC specimens. However, FAGPC specimens (100% fly ash) demonstrated lower mechanical performance as compared to OPC specimens due to low reactivity of fly ash particles, low amount of calcium and more porous structure. Among the chemical environments, sulfuric acid ($H_2SO_4$) was most dangerous environment for all concrete types.

• Korean Journal of Environmental Biology
• /
• v.17 no.2
• /
• pp.183-190
• /
• 1999

The bioleaching of heavy metals from fly ash was performed by Thiobacillus thiooxidans MET isolated from the enrichment culture of an anaerobically digested sludge. The effect of solid concentrations on the efficiency of metal leaching was studied in shaken flasks. In the range of solid concentrations 20 g.L­$^1$to 100 g.L­$^1$T. thiooxidans MET oxidized S$^{0}$ to sulfate without any lag period. The final pH of slurry solution was decreased to below pH 1, and the final oxide-redox potential (ORP) was increased to over 420 mV in the solid concentrations below 100 g.L­$^1$. However, the initial lag period of 4 to 8 days was required to obtain the pH reduction and ORP increase of the slurry solutions in the range of solid concentrations 150 g.L­$^1$to 300 g.L­$^1$. The sulfur oxidation rate of T. thiooxidans MET in 20~100 g.L­$^1$solid concentrations was 0.70~0.75 g-S.L­$^1$ㆍ d­$^1$, but its sulfur oxidation activity was remarkably inhibited with increasing solid concentration over 150 g.L­$^1$. Increasing fly ash solids concentration in the range of solids concentration 20 g.L­$^1$ to 200 g.L­$^1$decreased the removal efficiency of Zn, Cu, Mn, Cr and Pb. The solubilization of heavy metals from fly ash was strongly correlated with the pH value of slurry solution. When the pH of slurry solution was reduced to 3, the solubilization process of Zn, Cu and Mn started, and their solubilization efficiency of Zn, Cu and Mn was progressively increased below pH 2. However, the solubilization process of Cr and Pb started at pH 2.5 and 2.0, respectively.

• KEPCO Journal on Electric Power and Energy
• /
• v.2 no.3
• /
• pp.437-445
• /
• 2016

This paper discussed the effect of ammonia concentration adsorbed on fly ash for the ammonia emission as AAFA (Ammonia Adsorbed Fly Ash) produced from coal fired plants due to operation of NOx reduction technologies was landfilled with distilled or sea water at closed and open systems, respectively. Ammonia bisulfate and sulfates adsorbed on fly ash is highly water soluble. The pH of ammonium bisulfate and sulfate solution had significant effect on ammonia odor emission. The effect of temperature on ammonia odor emission from mixture was less than pH, the rate of ammonia emission increased with increased temperature when the pH conditions were kept at constant. Since AAFA increases the pH of solution substantially, $NH_3$ in the ash can release the ammonia order unless it is present at low concentration. $NH_4{^+}$ ion is unstable in fly ash and water mixtures of high pH at open system, which is changed to nitrite or nitrate and then released as ammonia gas. The proper conditions for < 20 ppm of ammonia concentration released from the AAFAs landfilled in ash pond were explored using an open system with sea water. It was therefore proposed that optimal operation to collect AAFA of less than 168 ppm ammonia at the electrostatic precipitator were controlled to ammonia slip with less than 5 ppm at SCR/SNCR installations, and, ammonia odor released from mixture of fly ash of 168 ppm ammonia with sea water under open system has about 20 ppm.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.3
• /
• pp.486-493
• /
• 2008

Safflower red colorants extracted by two solvents including the traditional ash solution and $K_{2}CO_{3}$ solution was used for dyeing cotton, ramie, viscose rayon, silk, wool, and nylon fabrics. The effects of extraction solvents on the reflectance, K/S value, and color properties of the dyed fabrics were investigated. Wash/dry cleaning and light colorfastness were evaluated. Reflectance curves of cotton, ramie, viscose rayon, and silk fabrics dyed with red colorants extracted by $K_{2}CO_{3}$ solution were similar, showing the maximum absorption at 520nm, to that of the dyed fabrics with red colorants extracted by ash solution. The reflectance curves of wool and nylon fabrics were different, showing the maximum absorption at 400nm. K/S values of dyed fabrics with red colorants extracted by $K_{2}CO_{3}$ solution were higher than that by ash solution with the exception of nylon. $L^{*},\;a^{*},\;b^{*}$, and $C^{*}$ of the dyed fabrics with red colorants extracted by $K_{2}CO_{3}$ solution were higher than that by ash solution except for $L^{*}$ of nylon and $b^{*}$ of viscose rayon. Color difference(${{\Delta}E}^*$) of the dyed fabrics between ash solution and $K_{2}CO_{3}$ solution increased in the order named as cotton, silk, ramie, viscose rayon, wool, and nylon. Regardless of extraction solvents, safflower red colorants produced RP color on cotton, ramie, and nylon, R color on viscose rayon and silk, and YR color on wool. Wash/dry cleaning fastness of the dyed fabrics was high above 3/4 rating but light fastness was very poor. It is considered that the use of $K_{2}CO_{3}$ solution instead of the traditional ash solution would be more effective in terms of color reproducibility and extraction process.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2003.05a
• /
• pp.61-65
• /
• 2003

Bottom ash among the coal ash is not used because of its poor properties. But encouraging the use of bottom ash as a construction material is a sensible method of utilization as it avoids the problems and costs associated with disposal and provides an alternative aggregate source. This study was aimed at using bottom ash as an alternative fine aggregate source to provide a solution to disposal and insufficient fine aggregate for the production of concrete. So properties of domestic bottom ash were estimated due to the difference of each domestic bottom ash. And compressive strength and durability were estimated as basic data to use bottom ash in building industries. As a result of the experiment, the very porous surface and angular shape of the bottom ash particles necessitate a higher apparent water-cement ratio. And due to the higher water requirement, the compressive strength and durability of mortar is lower than those of the control samples. But when 25 percent of the total dry weight of the natural fine aggregate was replaced by bottom ash, the engineering characteristics were similar.

• The Research Journal of the Costume Culture
• /
• v.12 no.6 s.53
• /
• pp.908-917
• /
• 2004

In the previous article, the effect of aluminum compounds on the mordanting of the Caesalpinia sappan L. dyeing was studied. According to the type of the compound, the effect on the dyeing was found to be different even if $Al^{3+}$ ion was present in the molecular structure of the compound. It was postulated that there would be complex effects other than the effects based on the purified Al compounds only, since there are some amount of compounds hard to neglect. In order to reproduce the traditional dyeing practice, rice straw ash solutions were prepared as mordanting agents. The pH values of the solution baths were 4, 5, 6, 9, and 11 in order to investigate the pH effect on the color development by adding appropriate amount of Schizandra chinensis extract solution. The inherent dyeing properties were evaluated by the analysis of color difference, air permeability, the characteristics developed by pre-mordanting, post-mordanting, or simultaneous mordanting methods.