• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 2000.11a
• /
• pp.61-66
• /
• 2000

분류층 건식 석탄가스화 방식을 택하고 있는 아주대학교 내 BSU 가스화기는 반응 후 회분을 용융상태의 슬랙으로 처리하여 가스화기 하단으로 배출하고, 생성된 석탄가스는 가스화기 상부로 배출시켜 생성된 석탄가스로의 슬랙 유입을 최소화한 디자인이다. 이러한 분류층 가스화기는 고정층이나 유동층 방식의 가스화기에 비해 가스화기 출구에서의 온도가 130$0^{\circ}C$이상의 고온이 유지되므로, 미분탄을 사용하는 분류층 가스화방식에서는 미립 입자 일부가 비말동반되어서 미분탄내의 회재를 100% 용융 슬랙으로 처리하기는 불가능하고, 수 % 정도는 생성 석탄가스와 함께 가스화기 밖으로 배출된다.(중략)

• The Journal of the Petrological Society of Korea
• /
• v.25 no.3
• /
• pp.283-298
• /
• 2016

Sangumburi crater, designated as Natural Monument No. 63, recognized as a maar, but precise geological mapping and geological characteristics in the field indicate that Sangumburi crater is a pit crater. Two stages of volcanic activities created Sangumburi pit crater. Lava flow (aphanitic pyroxene basalt I) and associated pyroclastic deposit (pyroclast I), composed of ash and lapilli, were formed at the stage 1. In the stage 2, lava flow (feldspar olivine basalt) was overlain by lava flow (aphanitic pyroxene basalt II) and associated pyroclastic deposit (pyroclast II), composed of agglomerate. Sangumburi pit crater formed at $0.073{\pm}0.036Ma$, determined by Ar-Ar age dating for the feldspar olivine basalt at the stage 2. It is not clear the preferred migration direction of subsurface magma after Sangumburi pit crater formed.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.40 no.3
• /
• pp.160-166
• /
• 2007

The coarse deposit with a lower mud content adjacent to the shelf of the southern East Sea is probably a "relict" sediment deposited in response to a lower stand of sea level during the Pleistocene. The sediment that developed on the slope and in the deep sea was river-borne primarily and was secondarily reworked or redistributed by the Tsushima Warm Current from the East China Sea. The clay mineralogy of the area suggests various sources of fine-grained sediment from adjacent rivers, the Korea Strait, volcanic material from Ulleung Island, and the Japan coast. Massive sand, bioturbated mud, homogeneous mud, and laminated mud were the dominant facies found in the core sediments from the study area. The massive sand was mainly volcanic ash from an eruption on Ulleung Island (9300 yr BP) and consisted of colorless pumiceous glass and a black scoriaceous type. The sedimentation rates on the slope, based on the Ulleung-Oki ash layer, were about 10cm/ky higher than in the basin. Other than the coarse-grain sediment, the mean size of the fine sediment dominating the bioturbated and homogeneous muds in the basin and the laminated mud on the slope was 6-10 phi. This indicates a difference in the major sedimentary process: hemipelagic sedimentation in the Ulleung Basin and mass flow deposition, such as turbidite, on the slope of the southern East Sea.

• Computers and Concrete
• /
• v.20 no.1
• /
• pp.77-84
• /
• 2017

Shirasu, a pyroclastic flow deposit, showed considerable performance as aluminosilicate source in geopolymer, based on past research. However, the polymerization reactivity was somewhat lower compared to the traditional fly ash based geopolymer even though the long-term strength was fairly good. The present study concentrates on the development of higher initial strength performance of Shirasu based geopolymer by utilizing ground granulated blast furnace slag as an admixture. Mortars with various mix proportions were adopted to study the effect of parametric changes on strength development along with the addition of slag in different percentages. A combination of sodium hydroxide and sodium silicate was used as alkaline activators considering parameters like molar ratios of alkali to geopolymer water and silica to alkali molar ratio. The mortars were cured at elevated temperatures under different curing conditions to analyze the effect on strength development. Compressive strength test, mercury intrusion porosimetry and X-ray powder diffraction were carried out to assess the strength performance and microstructure of slag-Shirasu based geopolymer. Based on the experimental study, it was observed that the initial and long-term strength development of Slag-Shirasu geopolymer were improved by the addition of slag.

• Korean Journal of Poultry Science
• /
• v.22 no.4
• /
• pp.203-211
• /
• 1995

In order to investigate the effect of feeding live yeast on growth performance, nutrients utilization, tibia mineral deposit and intestinal microorganism changes, a growth assay was conducted with 360 broiler chicks. Treatments were four levels of yeast as 0, 0.025, 0.05 and 0.1% in 1.83% tricalcium phosphate and two levels of yeast as 0 and 0.05% in 1.15% tricalcium phosphate. The crude protein content of live yeast was 45%, and 97% of it was in the pure protein form, with 46.6% of essential amino acids and 53.4% of non-essential amino acids. Growth performance was tended to increase by feeding the yeast but there was no significant difference(P>.05). The protein digestibility was increased as the feeding level of yeast increased. However, digestibilities of fat, fiber, calcium and phosphorus were not affected by the yeast. Ash and calcium content of tibia were increased as the level of yeast increased. Total number of E. coli in small intestine was significantly decreased(P<.05) in chicks fed yeast. Total number of Lactobaci1lus was significantly increased by the yeast feeding. The changes of microorganism in cecum had the same trend with the changes of microorganism in small intestine.

• Economic and Environmental Geology
• /
• v.47 no.3
• /
• pp.205-217
• /
• 2014

As Mt. Backdu is expected to erupt, the social and economic impacts of the eruption on the Korean peninsula as well as on the world become a research topic of interest. If the volcano erupts, South Korea can be directly impacted by volcanic ash, which will bring out secondary damages in various ways. Given that the direct damage is a basis to estimate indirect and secondary damages, this paper was to review a method to estimate direct damages, called catastrophe risk models, and estimate the direct damages of available eruption scenarios of Mt. Baekdu. Based on the results, the damages by volcanic ash will occur mostly around Gangwon province if the Mt. Backdu erupts. Thus the inventory lists and their damage functions of Gangwon provinces were collected. In particular agricultural and forestry products were surveyed based on the land use. Direct damages were estimated using volcanic ash distribution of eruption scenarios, inventory information and their damage functions. In result, a scenario in winter caused the damage of 299.8 billion KRW (20.4% of total agricultural production in 2010) and 28.9 billion KRW (9.0% of total forestry production in 2010) in agriculture and forestry, respectively. The damages in agriculture was larger, and it is due to the damage functions which show the agricultural products are more vulnerable to volcanic ash than forestry products. Also the agricultural production (1,471.7 billion KRW in 2010) are more than 4.5 times the forestry production (322.3 billion KRW in 2010) in Gangwon province. Inje and Gangnung had the most damages in the scenario in winter. Inje had the most damage due to the thick ash deposit (8.5 mm in average) despite the low production. On the other hand, Goseong had a low damage compared to the ash thickness larger than 20mm, owing to the low production. The direct damage estimated through this process can be used to estimate indirect damages.

• Resources Recycling
• /
• v.27 no.6
• /
• pp.59-67
• /
• 2018

Efflorescence is a white deposit of powders in the surface of cement concrete which can also occur in geopolymers. Efflorescence occurs when sodium ions in alkali activator react with atmospheric carbon dioxide to form sodium carbonate components. In this study, we investigated whether the secondary efflorescence can be reduced by controlling the Na/Al mole ratio or by changing the curing temperature and heat curing time in fly ash-based geopolymers. The 28 days compressive strength in geopolymers having Na/Al ratio of 1.0 was higher than geopolymers having Na/Al ratio of 0.8. The strength increased with the increasing curing temperature and longer heat curing time. On the other hand, efflorescence was lower when the curing temperature was high and the heat curing time was longer in the geopolymers having Na/Al ratio of 1.0. The geopolymers having Na/Al ratio of 0.8 showed accelerated efflorescence occurrence than the geopolymers having Na/Al ratio of 1.0. In order to reduce the occurrence of the secondary efflorescence of fly ash-based geopolymers, it will be advantageous to maintain the Na/Al ratio at 1.0, increase the curing temperature, and lengthen the heating curing time.

• Economic and Environmental Geology
• /
• v.50 no.2
• /
• pp.105-116
• /
• 2017

The purpose of this study is to provide the information on genesis of obsidian occurring in the southwestern part of Ulleung Island, Korea, and to discuss its implications for volcanic activity through volcanological and mineralogical properties of obsidian. Obsidian occurs locally at the lower part of the Gombawi welded tuff, showing various complex textures and flow banding. Though obsidian is mostly homogeneous, it is closely associated with alkali feldspar phenocrysts, reddish tuff, and greyish trachyte fragments. The obsidian occurs as wavy, lenticular blocks or lamination composed of fragments. Cooling fractures developed on obsidian glass are characterized by perlitic cracks, orbicular or spherical cracks, indicating that obsidian rapidly quenched to form an amorphous silica-rich phase. It is evident that hydration took place preferentially at the outer rim relative to the core of obsidian, forming alteration rinds. The glassy matrix of obsidian includes euhedral alkali feldspars, diopside, biotite, ilmenite, and iron oxides. Microlites in glassy obsidian are composed mainly of alkali feldspars and ilmenite. Quantitative analysis by EPMA on the obsidian glass part shows trachytic composition with high iron content of 3 wt.%. Accordingly, obsidian formed with complex textures under a rapid cooling condition on surface ground, with slight rheomorphism. Such results might be induced by collapse of lava dome or caldera, which produced the block-and-ash flow deposit and the transportation into valley while keeping high temperatures.

• Journal of Nutrition and Health
• /
• v.44 no.2
• /
• pp.101-111
• /
• 2011

It is controversial whether low calcium intake, commonly associated with osteoporosis, results in calcium accumulation in soft tissues. This study was conducted to investigate the effects of low calcium (Ca) and oxalate (ox) intake on soft-tissue Ca deposits and bone metabolism in ovariectomized (ovx) rats. Eight week old female Sprague-Dawley rats were ovariectomized and divided into four groups. The rats were fed experimental diets containing low (0.1%, w/w) or normal (0.5%, w/w) Ca with or without sodium oxalate (1%, w/w); Sham/NCa, Ovx/NCa, Ovx/LCa, Ovx/NCa-ox, Ovx/LCa-ox for 6 weeks. All ovx rats showed a remarkable increase in body and tissue weight, glutamic oxaloacetic transaminase, glutamic pyruvic transaminase, blood urea nitrogen, alkaline phosphatase, and decreases in weight, ash, and Ca contents, as well as bone breaking force compared to those in sham rats. Serum Ca concentration was not significantly affected by dietary Ca levels or ox intake. Kidney Ca, ox acid content, and microscopic Ca deposition increased remarkably in the Ovx/LCa-ox group compared to those in the other groups. Ca content in the spleen and aorta also increased significantly, but the weight contents, Ca, bone breaking force, and Ca and oxalic acid in feces decreased significantly in the Ovx/LCa-ox group. Serum parathyroid hormone levels were not significantly different among the groups. These results indicate that low Ca intake decreased bone mineral content and increased Ca deposits in soft tissues, which was aggravated by ox intake in ovx rats. Thus, high ox intake may result in a kidney disorder in patients with osteoporosis who eat a low Ca diet.

• Tribology and Lubricants
• /
• v.32 no.3
• /
• pp.82-87
• /
• 2016

We performed an experimental research on lubricant oil in dual fuel medium-speed engines. It is important to select the appropriate lubricant oil because it could significantly affect engine lifetime and performance. We generally recommend the selection of the lubricant oil according to the fuel grades as contents in the project guide. However, it is a considerable challenge for shipyards to implement this concept because of the lack of space to install the complicated lubricating oil system for dual fuel engines. Therefore, we determine the adaptability of one-common lubricant oil for HiMSEN dual fuel engine through this experimental research. To check abnormality in gas mode operation and durability of engine components when a lubricating oil with high BN (base number) is used, overhaul inspections and lubricant oil analysis are carried out two times, and four times, respectively, during an operation of approximately 300 h. We investigated the variations in kinematic viscosity, base number, element quantity, pentane insoluble and sulfated ash in lubricant oil analysis. Moreover, we also investigated whether the deposit formation or wear occurred in various bearings, injectors, exhaust valves, intake valves, piston rings and so on through the overhaul inspections. There are no problems in the lubricant analysis and the overhaul inspections. Through the experimental research, we confirm that one-common lubricant oil should be selected according to the higher sulfur content of fuel oil in dual fuel engines.