• Computers and Concrete
• /
• 제19권6호
• /
• pp.625-630
• /
• 2017

In this paper, 54 pull-out specimens and 36 cubic specimens with different replacement ratios of fly ash in the concrete (i.e., 0%, 20%, 30%, 40%, 50%, 60%) were fabricated to evaluate the bond at the interface between fly ash concrete and steel rebar. The results showed that the general shape of the bond-slip curve between fly ash concrete and steel rebar was similar to that for the normal concrete and steel rebar. The bond strength between fly ash concrete and the steel rebar was closer to each other at the same rebar diameter, irrespective of the fly ash replacement percentage. On the basis of a regression analysis of the experimental data, a revised bond strength mode and bond-slip relationship model were proposed to predict the bond-slip behaviour of high volume fly ash concrete and steel rebar.

• 펄프종이기술
• /
• 제46권4호
• /
• pp.85-92
• /
• 2014

The disposal of the paper mill sludge and the paper mill sludge ash become more important issue, because the environment regulation becomes more strict. In this study, the new mulching system was developed by using the paper sludge ash. The soil surface hardening mechanism for mulching with paper sludge ash, red clay and coal ash was evaluated. Since the CaO in the paper sludge ash provided the harden structure with water, the surface hardening mulching structure could cover the field surface and prevent the germination of weeds. More than 50 w.t.% of red clay and 10 w.t.% of paper sludge ash were required to create the solid soil surface structure for mulching. The field test with the new soil surface hardening mulching system for three months showed the generation of weeds could successfully be inhibited by the system.

• Natural Product Sciences
• /
• 제17권1호
• /
• pp.38-44
• /
• 2011

The quality inspections items such as loss on drying, total ash, and acid-insoluble ash contents in herbal medicines, have a correlation with external sources of pollution, but are not themselves hazardous factors. Z-scores for standard normal distribution were used to investigate herbal medicines requiring quality control, which exceeds the regulatory limits of quality inspection. In total, 7,773 samples were analyzed based on plant parts. For the loss on drying, the numbers of items of herbal medicines requiring quality control are like these; 15 items for above-ground parts and 5 items for underground parts. For the total ash, 21 items for above-ground parts and 4 items for underground parts. For the acid-insoluble ash, 8 items for above-ground parts and 1 item for underground parts.

• Computers and Concrete
• /
• 제26권2호
• /
• pp.175-183
• /
• 2020

Fly ash has become an important component of concrete as supplementary cementitious material with the development of concrete technology. To make use of fly ash efficiently, four types of fly ash with particle size distributions that are in conformity with four functions, namely, S.Tsivilis, Andersen, Normal and F distribution, respectively, were prepared. The four particle size distributions as functions of the strength and pore structure of concrete were thereafter constructed and investigated. The results showed that the compressive and flexural strength of concrete with the fly ash that conforming to S.Tsivilis, Normal, F distribution increased by 5-10 MPa and 1-2 MPa, respectively, compared to the reference sample at 28 d. The pore structure of the concrete was improved, in which the total porosity of concrete decreased by 2-5% at 28 d. With regarding to the fly ash with Andersen distribution, it was however not conducive to the strength development of concrete. Regression model based on the grey multiple linear regression theory was proved to be efficient to predict the strength of concrete, according to the characteristic parameters of particle size and pore structure of the fly ash.

• 한국농공학회논문집
• /
• 제56권1호
• /
• pp.21-30
• /
• 2014

The objective of this study is to find the electrical properties of Bottom ash from thermoelectric power plants in Korea. By using Parallel Plate Method, the electrical resistivity and dielectric constant were measured at the frequency from 20 Hz to 10 MHz. Also, unconfined strength test, XRF and sieve analysis were performed for finding the relationship between strength, physiochemical properties and electrical properties. In the result, the change of electrical resistivity and dielectric constant of bottom ash against frequency was similar to that of general soil. The proportion of fine grain in bottom ash had the positive correlation with dielectric constant and negative correlation with electrical resistivity. Chloride and sulfur trioxide were proportional to dielectric constant and the more bottom ash had chloride content, the lower electrical resistivity appeared in bottom ash. Unconfined strength of bottom ashes had a range from 200 kPa to 780 kPa and strength was inverse proportional to electrical resistivity.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.1051-1060
• /
• 2008

The use of the coal ash for surcharge material, in a view of the environmental aspect, can decrease amount of the reclamation through recycling waste materials as well as prevent a destruction of the ecosystem attributed to sand picking. In addition, it can reduce both unit cost of material and construction expenses. In this study, new construction material as alternative surcharge material using coal ash, which is by-product from thermoelectric power plant, were developed. Mixing ratios of fly ash and bottom ash derived from the coal ash in Samchunpo thermoelectric power plants were determined. Furthermore, mixing conditions depending on the ratios of the cement and gypsum used for chemical additive were determined too. Uniaxial compression strength tests were conducted at different mixing conditions and Design graph of optimum mixing ratio at each required strength for economic efficiency is indicated in this paper.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 추계 학술발표회 제20권2호
• /
• pp.565-568
• /
• 2008

플라이애쉬는 상대적으로 낮은 초기 강도 발현율에 의해서 고로슬래그 미분말에 비하여 사용이제한적이다. 따라서 플라이애쉬는 우수한 경제성과 많은 발생량에도 불구하고 많은 양이 활용되지 못하고 매립되고 있다.본 연구에서는 자극제가 플라이애쉬를 사용한 콘크리트의 성능에 미치는 영향을 확인하고 플라이애쉬의 활용 증대 가능성을 검토하였다. 연구 결과 자극제를 사용한 플라이애쉬 콘크리트가 동일 슬럼프, 공기량 및 로스를 가지면서 일반적인 혼화제를 사용한 콘크리트보다 압축강도가 높게 나타났으며 다양한 요인에서의 자극제의 성능 발현을 검증할 경우 자극제를 사용한 플라이애쉬 콘크리트의 현장 적용 확대가 가능할 것으로 사료된다.

• 암석학회지
• /
• 제22권4호
• /
• pp.273-289
• /
• 2013

강하화산재는 농업과 기반시설에 다양한 형태의 피해를 발생시킬 수 있는 악명 높은 재해이며, 특별히 항공과 인체 건강에 가장 유해하다. 본 연구는 백두산 화산으로부터 폭발적 분화에 의하여 화산재가 확산되고 퇴적되는 것을 모델링하기 위한 목적으로 개념적인 모델 설계를 논의하고자 한다. 이는 모델의 가정과 경계 조건에 대한 토의와 더불어 개념적인 모델의 상세 다이어그램, 가능한 입력 파라미터, 단위, 방정식에 대한 논의를 포함한다. 모델에 포함되어 있는 두 가지 주요 과정은 화산재의 확산과 퇴적이며, 만약 모델이 설계되면 모델을 실행시켜 얻을 수 있는 것은 분연주에 포함된 미세 화산재의 총량, 화산재의 이동 거리, 지표면에 침적되는 화산재 두께 등이다.

• 한국재료학회지
• /
• 제12권12호
• /
• pp.924-929
• /
• 2002

To recycle waste materials, this work was focused on development of glass-ceramic from incinerator fly ash with a large content of Cl and its physical property was evaluated. In the process, water washing as a pre-treatment before melting the fly ash was used to remove large amount of Cl component in the ash and to reduce melting temperature. As a result, glass was obtained at below $100^{\circ}C$ compared to the melting temperature before washing the ash. Also, internal crystallization occurred under single stage heat treatment (at $850-950^{\circ}C$ for 20-340min) without adding other materials into the ash. It was shown that the glass-ceramic was composed of four crystals, diopside, anorthite, akermanite, and unknown phase. Hardness of 8.3GPa was found in the glass-ceramic, which is a high value compared to reported others. Thus, the present process suggests that a good glass-ceramic produced from an incinerator ash could be applicable for structural materials in terms of economic and environmental points.

• 에너지공학
• /
• 제26권4호
• /
• pp.74-83
• /
• 2017

Coal-fired power plants supply roughly 50 percent of the nation's electricity but produce a disproportionate share of electric utility-related air pollution. Coal combustion technology can facilitate volume reduction of up to 90%, with the inorganic contaminants being captured in furnace bottom ash and fly ash residues. These disposal coal ash residues are however governed by the potential release of constituent contaminants into the environment. Accelerated carbonation process has been shown to have a potential for improving the chemical stability and leaching behavior of bottom ash residues. The aim of this work was to quantify the volume of $CO_2$ that could be sequestrated with a view to reducing greenhouse gas emissions and stabilize the contaminated heavy metals from bottom ash samples. In this study, we used PC boiler bottom ash, Kanvera reactor (KR) slag and calcined waste lime for measuring chemical analysis and heavy metals leaching tests were performed and also the formation of calcite resulting from accelerated carbonation process was investigated by thermo gravimetric and differential thermal analysis (TG/DTA).