Browse > Article
http://dx.doi.org/10.3740/MRSK.2002.12.12.924

Crystallization Phenomina and Vetrification From a Fly Ash With Large Content of Cl  

Kim, Jae-Myung (Dept. of Mterials Science and Metallurgical Engineering, Sunchon National University)
Kim, Hyung-Sun (Dept. of Mterials Science and Metallurgical Engineering, Sunchon National University)
Publication Information
Korean Journal of Materials Research / v.12, no.12, 2002 , pp. 924-929 More about this Journal
Abstract
To recycle waste materials, this work was focused on development of glass-ceramic from incinerator fly ash with a large content of Cl and its physical property was evaluated. In the process, water washing as a pre-treatment before melting the fly ash was used to remove large amount of Cl component in the ash and to reduce melting temperature. As a result, glass was obtained at below $100^{\circ}C$ compared to the melting temperature before washing the ash. Also, internal crystallization occurred under single stage heat treatment (at $850-950^{\circ}C$ for 20-340min) without adding other materials into the ash. It was shown that the glass-ceramic was composed of four crystals, diopside, anorthite, akermanite, and unknown phase. Hardness of 8.3GPa was found in the glass-ceramic, which is a high value compared to reported others. Thus, the present process suggests that a good glass-ceramic produced from an incinerator ash could be applicable for structural materials in terms of economic and environmental points.
Keywords
fly ash; glass-ceramic; crystallization;
Citations & Related Records
연도 인용수 순위
  • Reference
1 T. Uchida, I. Itoh and K. Harada, Waste Management, 16, 475 (1996)   DOI   ScienceOn
2 M. Ferraris, M. Salvo, F. Smeacetto, L. Augier, L. Barbieri, A. Corradi, and I. Lancellotti, J. Eur. Ceram. Soc., 21, 459 (2001)   DOI   ScienceOn
3 A.R. Boccaccini, J. schawohl, H. Kern, B. Schunck, J.M. Rincon and M. Romero, Glass Technol., 41 (3), 99 (2000)
4 M.S. Hernandez-Crespo and J. Ma. Rincon, Ceramics International, 27, 713 (2001)   DOI   ScienceOn
5 K. Nishida, Y. Nagayoshi, H. Ota, and H. Nagasawa, Waste Management, 21, 443 (2001)   DOI   ScienceOn
6 V.K. Marghussian and M.H. Niaki, J. Eur. Ceram. Soc., 15, 343 (1995)   DOI   ScienceOn
7 P.F. James, in Glass and Glass-Ceramics, ed. by M.H. Lewis, Chapman and Hall, London, 1989, 59
8 P.S. Rogers and J. Williamson, Glass Technol., 10, 46 (1969)
9 V. Albino, R. Cioffi, L. Santoro and G.L. Valenti, Waste Management & Research, 14, 29 (1996)   DOI
10 L. Barbieri, A. Corradi, and I. Lancellotti, J. Eur. Ceram. Soc., 20, 1637 (2002)   DOI   ScienceOn
11 J.W. Ahn, H.S. Kim, K.S. Han and H. Kim, Proceeding of the 3rd ISEPD, 97 (2002)
12 S. Stucki and A. Jakob, Waste Management, 17(4), 231 (1997)   DOI   ScienceOn
13 M. Romero, J. Ma. Rincon, R.D. Rawlings, and A.R. Boccaccini, Materials Research Bulletin, 36, 383 (2001)   DOI   ScienceOn
14 P. Rocabois, J. N. Rontoire, J. Lehmann and H. Gaye, J. Non-Cryst. Solids, 282, 98 (2001)   DOI   ScienceOn
15 M. Romero, R.D. Rawlings and J. Ma. Rincon, J. Non-Cryst. Solids, 271, 106 (2000)   DOI   ScienceOn
16 Y.J. Park and J. Heo, J. Hazardous Materials, 2783, 1 (2001)