• Journal of KIBIM
• /
• v.5 no.4
• /
• pp.47-52
• /
• 2015

This paper presents a case study using Building Information Modeling (BIM) for planning, simulating, and implementing complex site logistics in a headquarter office building construction project in Silver Spring, MD. As part of the project a prefabricated 92ft structural tube steel pedestrian connector bridge was installed between two adjacent buildings in the city of Silver Spring, MD. There were multiple significant challenges to deliver, offload, prepare, and install the connector bridge safely, on time, and with the minimum disturbances to the neighbors. BIM was of the foremost importance to visualize, simulate, analyze, improve, and communicate the site logistics plan from delivery to installation of the connector bridge. As a result of the effort, GC of the project was able to prepare a highly detailed plan, communicate it effectively to all stakeholders, and flawlessly execute the work as planned. This case study would provide a useful reference for contractors who are seeking a better planning method that enables generation of more accurate, implementable, optimized plans for complex site logistics.

• Journal of the Semiconductor & Display Technology
• /
• v.18 no.2
• /
• pp.17-22
• /
• 2019

The method of electrical discharge machining (EDM), one of the processing methods based on non-traditional manufacturing procedures, is gaining increased popularity, since it does not require cutting tools and allows machining involving hard, brittle, thin and complex geometry. This present investigation details the determination of optimum process parameter to attain the better machining performance in EDM of AISI 4340 steel with graphite as a tool electrode. The experimental combinations are planned and analyzed by Taguchi's design of experiments approach. To predict the optimal condition, the experiments are conducted by using Taguchi's L27 orthogonal array. The influence of process variables such as discharge current, pulse on and pulse off time, voltage and spark speed were investigated to control the various desired performance measures such as surface roughness. Analysis of Variance (ANOVA) has to be performed to know the magnitude of each factor. Investigations indicate that the surface roughness is strongly depend on pulsed current.

• Journal of Korean Association for Spatial Structures
• /
• v.23 no.3
• /
• pp.57-69
• /
• 2023

In this study, in order to establish a strategy for developing an fire following earthquake risk assessment method that can utilize domestic public databases(building datas, etc.), the method of calculating the ignition and fire-spread among the fire following earthquake risk assessment methodologies proposed by past researchers is investigated After investigating and analyzing the methodology used in the HAZUS-MH earthquake model in the United States and the fire following earthquake risk assessment methodology in Japan, based on this, a database such as a domestic building data utilized to an fire following earthquake risk assessment method suitable for domestic circumstances (planned) was suggested.

• Journal of Acupuncture Research
• /
• v.19 no.3
• /
• pp.138-155
• /
• 2002

Objective : The purpose of this study is to work on the problems and on the direction of the study regarding the evidence-based study of Acupuncture. Methods : We reviewed the PubMed electronic database. Eight articles of systematic review without meta-analysis and six articles without meta-analysis were selected. Results : In the study of eight articles of systematic review without meta-analysis, there were two articles on effectiveness of acupuncture and one on non-effectiveness of acupuncture. Four articles were about the changes according to the quality of randomized controlled trials. Also, one article was about the side-effect of acupuncture. In the study of six articles of systematic review with meta-analysis, there were two articles on Odds Ratio, two on Relative Risk, one on number-needed-to-treat, and two on 18 predefined methodological criteria. Conclusion : As the quality of RCTs was high, positive response decreased and as the quality of RCTs was low, positive response increased. For the study of evidence-based acupuncture, it is necessary that we conduct research on well-planned placebo acupuncture, large sample size, statistical method, method of searching and assessing literature and method of meta-analysis.

• Wind and Structures
• /
• v.21 no.6
• /
• pp.597-607
• /
• 2015

With an increasing demand of a renewable energy, new offshore wind turbine farms are being planned in some parts of the world. Foundation installation asks a significant cost of the total budget of offshore wind turbine (OWT) projects. Hence, a cost reduction from foundation parts is a key element when a cost-efficient designing of OWT budget. Mono-piles have been largely used, accounting about 78% of existing OWT foundations, because they are considered as a most economical alternative with a relatively shallow-water, less than 30 m of seawater depth. OWT design standards such as IEC, GL, DNV, API, and Eurocode are being developed in a form of reliability based limit state design method. In this paper, reliability analysis using the response surface method (RSM) and numerical simulation technique for an OWT mono-pile foundation were performed to investigate the sensitivities of mono-pile design parameters, and to find practical implications of RSM reliability analysis.

• Journal of the military operations research society of Korea
• /
• v.3 no.1
• /
• pp.109-114
• /
• 1977

There are some factors which cause the profits from the production to be decreased or increased. They are, for example, the rise in efficiency of production facilities resulting from the development of the scientific technique, the changes of purchase price of those, and the drop in efficiency of those owing to there long-term operation. In this connection, an manager can get the highest profit by deciding the proper time of new facilities replacement for those in operation or in being planned, which leads to good management planning of his manufactaring business for a given period or a long time. Main purpose of this is the study of how we decide the optimal time or facilities replacement in order to maximize the total profits for a given period by considering them as continous function as to the time in the case where a machineng is set. The results are following: 1. The definition of profit function is in duced in consideration of the breakdowns caused from continous operation of the machinery. 2. The necessary conditions are obtained for the optimal time of replacement and find out the methods of its solution. 3. Comparing between the 'Short cut' method and method in this paper, we obtained that our method is more realistic.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.13 no.2
• /
• pp.65-71
• /
• 2018

In order to make the underwater vehicle carry out the mission in a submarine environment, it is needed to plan a safe and efficient route to a given destination and prevent the autonomous submersible from colliding with obstacles while moving along the planned route. The function of collision avoidance makes the travel distance of the autonomous submersible longer. Moreover, it should move slowly near to obstacles against their moving disturbance. As a result, this invokes the degradation of the navigation efficiency in the process of collision avoidance. The side effect of the collision avoidance is not ignorable in the case of high congested environments such as the coast with many obstacles. In this paper, we suggest a path planning method which provides the route with minimum travel time considering collision avoidance in congested environment. For the purpose, we define environmental congestion map related to geometric information and obstacles. And we propose a method to consider the moving cost in the RRT scheme that provides the existing minimum distance path. We verified that the efficiency of our algorithm with simulation experiments.

• Korean Institute of Interior Design Journal
• /
• v.27 no.3
• /
• pp.90-99
• /
• 2018

The purpose of this study is to study how F.L. Wright reflected the climatic properties and materials of the region into creative ways of designing his architecture. The research method examined the design methods and use of materials by Wright in existing research literature and compares the space plans of housing works in Arizona. The research results will be summarized as follows : 1) For two-story houses, pilotis was used to avoid the hot air and the walls on the ground floor were often planned as thick wall. 2) In the fifties, F.L. Wright's design method changed in a circle from the vertical and horizontal lines. 3) F.L.Wright's Architectural form concepts and design concepts were extracted from local symbolic forms and natural forms. 4) F.L.Wright avoided Arizona's direct light but Indirect sunlight enters into the interior space. 5)External space was expressed as a closed space, while internal space was expressed as an open space. It's like an organic space. 6) Most of the housing materials used are stone and cement from rough deserts, and wood with low heat conductivity and thick concrete blocks to prevent the sunlight from rising above.

• Journal of The Korean Society of Integrative Medicine
• /
• v.2 no.2
• /
• pp.49-58
• /
• 2014

Purpose : This study was to evaluate the effectiveness of exercise therapies for breast cancer patients through review analysis of the rehabilitation they had usually received to increase the quality of their lives. Exercise therapy for breast cancer patients has proven to be highly effective, so it is strongly recommended. Method : Focusing on breast cancer-related journal articles published since 1990, an analysis using the Spolit and Medline search engines was undertaken of breast krebs, tumors, cancer, sportaktivitaet, and exercise in patients with breast cancer. Exercise for breast cancer patients has been considered to have positive effects on fatigue, muscle weakness, and the range of motion of upper extremities, as well as on depression. Breast cancer patients have to be divided according to their identifying clinical characteristics, and then have to be prescribed a suitable exercise program. In accordance with previous articles, a varied exercise program was organized in terms of frequency, duration, and intensity. The frequency was more than three times per week. Its duration was about 30 minutes per session. Result : The intensity of exercise was moderate. The types of exercises included recommended strengthening exercises, as well as various aerobic exercises. Based on previous data, a new exercise method for breast cancer patients was introduced in this study. Conclusion : Above all, exercise programs should be planned according to the different characteristics of breast cancer patients, in order to reduce physical impairments and psychological problems.

• Journal of Korean Institute of Industrial Engineers
• /
• v.34 no.4
• /
• pp.433-444
• /
• 2008

With development of RFID technology, medicine and national defense as well as logistics and distribution industries have tried to adopt RFID system. Small projects as well as large national projects have planned to adopt the new technology. However, a lot of companies that have promoted a RFID-based project have confronted many problems due to a lack of information about demonstration projects and absence of systematic guideline. Therefore, it's urgent to develop a practical and useful guideline for companies that have considered to adopt the RFID system. In this paper, a practical framework to adopt RFID system is suggested by five phases : establishment of project plan, analysis of objectives, selection of equipments, development/installation, and operation/post management phases. Besides, a detail method by each stages is also given. A systematic RFID system adoption procedure has been defined through an analysis on demonstrated projects and interview with an expert and the adoption method by stage has been suggested. The purpose of this paper is to minimize the entry barriers by suggesting a practical RFID adoption procedure.