• Applied Microscopy
• /
• 제8권1호
• /
• pp.67-76
• /
• 1978

A comparative investigation of fine structure of callus cells derived from tissue culture of Panax ginseng was made by electron microscope. Callus was consisted of large superficial cells and small inner zone cells derived from shoot apex tissue cultured for 16 weeks. Large superficial cells were contained the clusters of starch grains surrounded by a double plastid membrane. Especially, electron dense particles were deposited just inside and outside of plastid membrane and also deposited on mitochondria-like and endoplasmic reticulum-like structures. Crystalline body was also found in superficial cells. Small inner zone cells were characterized by presence of proplastids sheathed by short endoplasmic reticulum profiles. presence of spiral configuration of ribosomes and absence of crystalline body. Organ primordia was consisted of a dense cytoplasm and notable nucleate cells derived from nodal tissue cultured for 67 weeks. Proplastids containing starch grains and crystalline bodies were frequently observed; starch grains are of small quantity and does not form the clusters as in inner zone cells; hexagonal crystalline body itself does not have always limiting membrane. Remarkably. in a few cells of primordia, particles resembling the presumptive virus were observed mainly in condensed nuclear chromatin and also in cytoplasm, in mitochondrion-like organelle.

• 자원환경지질
• /
• 제29권1호
• /
• pp.25-33
• /
• 1996

Stable isotopic ratios of the carbonate rocks and chemical compositions of the matrix of pebble bearing phyllitic rocks known as the Hwanggangri Formation, which are in hot debate on their origin such as tillite, debris flow and turbidite, were determined to interpret their depositional environment. Argillaceous matrix of the pebble bearing phyllitic rocks has a high content of CaO (av. 19.5%) and MgO (av. 8.3%), corresponding to calcareous sandy shale. No difference of chemical compositions including trace elements and REE is in the matrices between the Hwanggangri and the Kunjasan Formations. Carbonate rocks from the Okchon zone and outside of the zone range $-2.5{\sim}+6.1$‰ in ${\delta}^{13}C$ and $+5.8{\sim}+25.9$‰ in ${\delta}^{18}O$, indicating normal marine limestone. However, unusally $^{13}C$ enriched carbonate rocks might be deposited in the highly evaporated sedimentary basin. A wide variation of ${\delta}^{18}O$ values is responsible for metamorphism with a $^{18}O$ depleted meteoric water. Isotopic equilibrium temperatures by graphite-calcite geothermometer show a higher metamorphic temperature ($547{\sim}589^{\circ}C$) in the Okchon zone than those ($265{\sim}292^{\circ}C$) in the Samtaesan Formation of the Chosun group. Rhythmic alternation of relatively thin shale with thin limestone in the Kounri Formation is not cherty layer but thin limesilicate bed by metasomatic replacement. Judging from the isotopic and chemical compositions of the carbonate rocks and calcareous matrix of the pebble bearing phyllitic rocks, the Hwangganari Formation was deposited in the shallow marine environment favorable to debris flow.

• 한국지구과학회지
• /
• 제29권6호
• /
• pp.454-465
• /
• 2008

지난 최대빙하기 이후 형성된 대륙붕 퇴적체의 퇴적환경 변화를 연구하기 위해 동중국해 북부(북동중국해) 대륙붕에서 채취된 코아 퇴적물에 대한 탄소동위원소(AMS $^{14}C$) 연대측정과 함께 저서유공충 군집 변화를 분석하였다. 코아퇴적물은 최하부에서 약 16,000yr B.P.이며, 최상부 30cm에서는 약 3,000yr B.P.로 지난 최대빙하기에서 최근까지 순차적으로 발달한 퇴적충으로 구성된다. 코아 퇴적물에서 산출되는 저서유공충 분석 결과, 군집조성, 종수(S) 그리고 종다양도(H(S)) 등이 약 240cm를 기준으로 상부와 하부에서 뚜렷하게 구분된다. 퇴적물 깊이 240cm 이하의 하부 퇴적층(Zone I)에서는 Ammonia beccarii와 Elphidium clavatum (s.l.)이 우세하게 출현하며, 부유성 유공충 산출율(P/T ratio, 평균 22%)과 종수(평균 44), 다양도(평균 2.9) 등이 상대적으로 낮다. 이러한 저서유공층 군집 특성과 연대측정에 근거할 때 Zone I은 최대빙하기 이후 초기 해수면 상승 동안(16${\sim}$10ka) 수심 약 20${\sim}$30m 내외의 염하구 환경에서 퇴적된 것으로 해석된다. 한편 상부의 Zons II 퇴적층은 Eilohedra nipponica와 Bolivina robusta가 우점하며, 부유성 유공층 산출율(>40%)과 종수(>60) 둥이 크게 증가하는 경향을 보인다. Zone II는 유공충 군집 구성 특성에 따라 두 개의 구간(Zone IIa와 IIb)으로 세분되며, Zone IIa는 약 9,000 yr B.P. 이후 해수면이 빠르게 상승하는 현세 해침 동안 연구해역에 형성된 내-중대륙붕 환경에서, 그리고 Zone IIb는 약 6,000 yr B.P. 이후 해수면이 현재와 같은 수심 80m 내외의 외대륙붕 환경에서 퇴적된 것으로 해석된다. 결론적으로 코아 퇴적물의 저서유공충 군집 변화 특성은 최대빙하기 이후해수면 상승과 함께 형성된 대륙붕 퇴적체의 퇴적환경 변화를 잘 반영한다.

• Journal of Welding and Joining
• /
• 제12권4호
• /
• pp.151-161
• /
• 1994

FCAW has wide application in ship fabrication, maintenance and field erection. It has many advantages over SMAW.SAW and GMAW process. In many applications, the FCAW provides highquality weld metal. This method can reduce weld defects especially porosity and spatter. But the fatigue characteristics of those deposited metal have been rarely investigated. The purpose of this study is to investigate the cyclic stress-strain behavior and fatigue tests by the constant strain control were carried out on the rounded smooth specimen with deposited metal using the metal type flux cored wire. As the results of this study for the deposited metal welded by the metal type flux cored wire, the hardening or softening characteristics under cyclic load were investigated and cyclic stress-strain curve, strain-fatigue life curve, stress-strain function and fatigue life relation which are useful to estimate the fatigue life under the stress concentration condition were obtained.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2003년도 춘계종합학술대회
• /
• pp.366-369
• /
• 2003

High T$_{c}$ superconducting lines will be applied as key materials in the areas of power transmission line; magnetic levitation of vehicle; magnetic separation; magnetic energy storage and marine propulsion. A combination method of electrophoresis deposition and zone-melting for preparation of YBaCuO tape is proposed. The submicron particle powder of YBaCuO made by sol-gel method is used in the electrophoresis process. A 40~50${\mu}{\textrm}{m}$ thickness of YBaCuO film on Ag plate could be deposited in about three minutes. After deposition the film is rolled and heat treated in order to increase the density and the adhesion of the film to the Ag plate. Silver(Ag) and lead oxide(PbO) were added in the YBaCuO powder in order to reduce its melting point. The YBaCuO coating with controlled Ag and PbO contents was preliminarily zone-melted at about 945$^{\circ}C$.>.

• Journal of information and communication convergence engineering
• /
• 제1권2호
• /
• pp.63-66
• /
• 2003

High $T_c$ superconducting lines will be applied as key materials in the areas of power transmission line; magnetic levitation of vehicle; magnetic separation; magnetic energy storage and marine propulsion. A combination method of electrophoresis deposition and zone-melting for preparation of YBaCuO tape is proposed. The submicron particle powder of YBaCuO made by sol-gel method is used in the electrophoresis process. A 40∼50 ${\mu}\textrm{m}$ thickness of YBaCuO film on Ag plate could be deposited in about three minutes. After deposition the film is rolled and heat treated in order to increase the density and the adhesion of the film to the Ag plate. Silver(Ag) and lead oxide(PbO) were added in the YBaCuO powder in order to reduce its melting point. The YBaCuO coating with controlled Ag and PbO contents was preliminarily zone-melted at about $945^{\circ}C$.

• 자원환경지질
• /
• 제5권4호
• /
• pp.231-239
• /
• 1972

The central region of South Korea is composed of Precambrian formations and Jurassic Daebo granites and is divided tectonically into three provinces, that is, the Ok chon geosynclinal zone in the middle, the Kyonggi massif on the north and northwest side, and the Ryongnam massif on the south and southeast side. The general trend of the Okchon geosynclinal zone and the distribution of Daebo granites is northeast, the Sinian direction. The Kyonggi massif is composed of Precambrian Y onchon system, Sangwon system, gneisses, and Daebo granites, and the Ryongnam massif also Precambrian Ryongnam and Yulri systems, gneisses, and Daebo granites. Precambrian formations in both areas are of flysch type sediments and may be roughly correlated with each other. These formations except Sangwon and Yulri systems are thought to be early to middle Precambrian age and have acted as basement for the Okchon geosyncline where late Precambrian Okchon system was deposited. The Okchon geosynclinal zone is divided into paleogeosynclinal zone to southwestern parts where the Okchon system is distributed, and neogeosynclinal zone to northeastern parts where nonmetamorphosed Paleozoic sediments are dominantly cropped out. Both zones are separated by upthrust created by Daebo orogeny of Jurassic period, which continues southwesterly to bind the Okchon geosynclinal zone and the Ryongnam massif at southwestern parts bisecting Korea peninsula diagonally. Three periods of structural development are recognized in the area. Folds and faults of preTriassic age prevail in the Kyonggi massif. Many isoclinal folds and thrusts originated by Jurassic Daebo orogeny are aligned in the Okchon paleogeosynclinal zone paralleling to the geosynclinal axis so that same formation appears repeatedly in narrow strips, whereas fold axis in neogeosynclinal zone trerid west-northwesterly which might be of Triassic in age and modified by later Daebo orogeny. Discontinuity of geology and structure of Okchon geosynclinal zone is attributed to shifting of the geosyncline through geologic time.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.72-77
• /
• 2004

In a primary reactor cooling system(RCS), a dissimilar weld zone exists between cast stainless steel(CF8M) in a pipe and low-alloy steel(SA508 cl.3) in a nozzle. Thermal aging is observed in CF8M as the RCS is exposed for a long period of time to a reactor operating temperature between 290 and $330^{\circ}C$, while no effect is observed in SA508 cl.3. The specimens are prepared by an artificially accelerated aging technique maintained for 300, 1800 and 3600 hrs at $430^{\circ}C$, respectively. The specimens for elastic-plastic fracture toughness tests are prepared one type, which notch is created in the heat affected zone(HAZ) of CF8M. And, the specimens for fatigue crack growth tests are prepared in three classes, which notches are created at the center of deposited zone, the HAZ of CF8M, and the HAZ of SA508 cl.3. From the experiments, the J-integral values with the increase of aging time decrease, and the differences of the fatigue crack growth behaviors are relatively small in the three classes specimens.

• 한국전기전자재료학회논문지
• /
• 제22권9호
• /
• pp.717-723
• /
• 2009

Ni/Al ('/' denotes deposition sequence) contacts were deposited on Al-implanted 4H-SiC for ohmic contact formation, and the conduction properties were characterized and compared with those of Ni-only contacts. The thicknesses of the Ni and Al thin film were 30 nm and 300 nm, respectively, and the films were sequentially deposited bye-beam evaporation without vacuum breaking. Rapid thermal anneal (RTA) temperature was varied as follows : $840^{\circ}C$, $890^{\circ}C$, and $940^{\circ}C$. The specific contact resistivity of the Ni contact was about $^{\sim}2\;{\pm}\;10^{-2}\;{\Omega}{\cdot}cm^2$, However, with the addition of Al overlayer, the specific contact resistivity decreased to about $^{\sim}2\;{\pm}\;10^{-4}\;{\Omega}{\cdot}cm^2$, almost irrespective of RTA temperature. X-ray diffraction (XRD) analysis of the Ni contact confirmed the existence of various Ni silicide phases, while the results of Ni/Al contact samples revealed that Al-contaning phases such as $Al_3Ni$, $Al_3Ni_2$, $Al_4Ni_3$, and $Ab_{3.21}Si_{0.47}$ were additionally formed as well as the Ni silicide phases. Energy dispersive spectroscopy (EDS) spectrum showed interfacial reaction zone mainly consisting of Al and Si at the contact interface, and it was also shown that considerable amounts of Si and C have diffused toward the surface. This indicates that contact resistance lowering of the Ni/Al contacts is related with the formation of the formation of interfacial reaction zone containing Al and Si. From these results, possible mechanisms of contact resistance lowering by the addition of Al were discussed.

• 한국기계가공학회지
• /
• 제20권10호
• /
• pp.27-37
• /
• 2021

The use of additive manufacturing processes for the repair and remanufacturing of mechanical parts has attracted considerable attention because of strict environmental regulations. Directed energy deposition (DED) is widely used to retrofit mechanical parts. In this study, finite element analyses (FEAs) were performed to investigate the influence of the substrate phase and inclination angle on the heat transfer characteristics in the vicinity of Hastelloy X regions deposited via DED. FE models that consider the bead size and hatch distance were designed. A volumetric heat source model with a Gaussian distribution in a plane was adopted as the heat flux model for DED. The substrate and the deposited powder were S45C structural steel and Hastelloy X, respectively. Temperature-dependent thermal properties were considered while performing the FEAs. The effects of the substrate phase and inclination angle on the temperature distributions and depth of the heat-affected zone (HAZ) in the vicinity of the deposited regions were examined. Furthermore, the influence of deposition paths on depths of the HAZ were investigated. The results of the analyses were used to determine the suitable phase and inclination angle of the substrate as well as the appropriate deposition path.