• 대한치과교정학회지
• /
• 제53권1호
• /
• pp.45-53
• /
• 2023

Objective: This study aimed to evaluate the shear bond strength (SBS) of orthodontic brackets bonded to three-dimensionally (3D)-printed materials after various surface treatments and artificial aging compared with that bonded to computer-aided design/computer-aided manufacturing (CAD-CAM) polymethyl methacrylate (PMMA)-milled materials. Methods: Eighty cylindrical specimens were 3D printed and divided into the following four subgroups (n = 20 each) according to the surface treatment and artificial aging procedure. Group A, sandblasted with 50 ㎛ aluminum oxide particles (SA) and aging; group B, sandblasted with 30 ㎛ silica-coated alumina particles (CO) and aging; group C, SA without aging; and group D, CO without aging. For the control group, 20 CAD-CAM PMMA-milled cylindrical specimens were sandblasted with SA and aged. The SBS was measured using a universal testing machine (0.25 mm/min), examined at ×2.5 magnification for failure mode classification, and statistically analyzed (p = 0.05). Results: The retention obtained with the 3D-printed materials (groups A-D) was higher than that obtained with the PMMA-milled materials (control group). However, no significant difference was found between the study and control groups, except for group C (SA without aging), which showed significantly higher retention than the control group (PMMA-SA and thermocycling) (p = 0.037). Study groups A-D predominantly exhibited a cohesive specimen mode, indicating specimen fracture. Conclusions: Orthodontic brackets bonded to 3D-printed materials exhibit acceptable bonding strengths. However, 3D-printed materials are prone to cohesive failure, which may result in crown fractures.

• 생물환경조절학회지
• /
• 제25권3호
• /
• pp.139-145
• /
• 2016

본 연구의 목적은 폐쇄형 식물생산시스템에서 세가지 혼합 LED와 형광등에서 자란 적치마 상추의 생육과 광이용효율을 비교하는 것이다. 18일간 육묘한 적치마상추묘를 적색(R, 655nm), 청색(B, 456nm), 녹색(G, 515nm), 백색(W, 456nm + 558nm)의 혼합 LED(R:B=8:2, R:W:B=8:1:1, R:G:B=8:1:1)와 형광등이 설치된 폐쇄형 식물생산시스템에 정식하였다. 형광등에서 자란 상추는 모든 LED 처리에 비해 유의적으로 높은 엽형지수를 보였다. 지상부와 지하부 생육에서 LED 처리간 유의적 차이를 보이지 않았으나, 모든 LED 처리가 형광등에 비해 약 34% 지상부 생체중의 증가를 유도시켰다. 한편, 정식 후 4주차에 형광등의 총 소비 전력은 145kW인 반면, LED 처리구들에서 형광등의 약 1/3배인 54kW를 나타냈다. LED 처리구들의 건물중에 대비한 광 이용 효율은 약 34mg/W였으며, 이는 형광등 보다 약 3.5배 높은 값이었다. 결론적으로, 본 연구는 식물 생산 시스템에서 적절한 조합의 LED 조사는 형광등에 비해 상추 생장을 증진시킬 수 있으며 추가적으로 에너지 절감을 통해 광이용효율도 극대화 할 수 있음을 보여주었다.

• 원예과학기술지
• /
• 제34권1호
• /
• pp.84-93
• /
• 2016

인공광 식물공장은 조명에 많은 전력이 소요되므로 광이용효율의 향상은 필수적이다. 본 연구에서는 식물공장의 LED 광원에 산란 유리를 사용함으로써 광이용효율을 향상하고자 하였다. 실험에는 Haze factor 40%와 80%의 산란 유리가 적용된 두 가지 처리구와 산란 유리를 사용하지 않은 대조구를 두었다. 3-D 광선추적기법을 이용하여 상추 작물의 군락 광분포를 분석하였으며 군락 광합성률은 밀폐 아크릴 챔버를 이용하여 측정하였다. 각 처리구 별로 16주의 상추를 수경재배 방식으로 28일간 재배하여 생장량을 비교하였다. 시뮬레이션 결과, 모든 처리구에서 작물의 상단부에 광량이 집중되었고 대조구에서 작물 상부에 광량 핫스팟이 발생하며 처리구에 비하여 광이용효율이 감소하였다. 총 광 흡수량은 대조구에서 가장 높았으나 유효 광 흡수량은 처리구에서 더 높았고 산란광의 비율이 높은 처리에서 더 높게 나타났다. 작물의 군락 광합성률과 생장량은 산란 유리를 사용한 처리구에서 대조구에 비해 높게 나타났다. 결과적으로 산란 유리의 이용을 통해 상추의 군락 내 광분포가 개선되었고 군락 광합성률 및 생장량이 증가하여 식물공장의 광이용효율이 향상되는 것으로 나타났다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제29권4호
• /
• pp.309-320
• /
• 2007

Purpose: This study was to evaluate the removal effect on artificial plaque from RBM treated implant surfaces that are exposed due to peri-implantitis. Materials and methods: Artificial plaque with Streptococcus mutans and acquired pellicle adhered to RBM treated implant discs. Study materials divided into one control and six test groups. In test groups, physical and chemical methods used to remove plaques. Prophyflex, Professional Mechanical Tooth Cleaning (PMTC) and interdental brush as mechanical treatments and 0.1% Chlorhexidine, Citric acid, HCl tetracycline as a chemical treatment were used. To analyses the study, disc weight was measured for remaining plaque quantities and SEM(Scanning Electronic Microscope) findings was taken for evaluation of surfaces. Results: 1. In weight changes, there was significant difference between each treatment group and the control group (p<0.05). Therefore all treatment methods using this study have good ability for remove plaques. 2. In weight changes, there was no significant difference between mechanical and chemical group, and there were no significant differences between each groups (p>0.05). 3. SEM findings after mechanical treatment disclosed as follows; Prophyflex group looked like sound implant surface, and there were some paste on implant surface at PMTC group, and there were some artificial plaque at interdental brush group. 4. SEM findings after chemical treatment disclosed as follows; there were some dark lesions which were supposed as the product from Streptococcus mutans at Chlorhexidine, Citric acid and HCl tetracycline groups. Conclusion: All six methods using in this study have good ability to remove artificial plaque on RBM treated implant. According to SEM findings, prophyflex is a superior method for removing of dental plaque among test groups.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 추계학술대회논문집
• /
• pp.281-284
• /
• 2003

The microstructural changes of Al-Zn-Mg-Cu alloy containing Sc during hot extrusion and post heat treatment is investigated. Two kinds of Al-Sc alloys with different alloying elements (B1, B2) are hot extruded to make I-shape bars at 380$^{\circ}C$, then the bars are solution treated at 480$^{\circ}C$ for 2hrs followed by artificial aging at 120$^{\circ}C$ for 24hrs. The interior microstructure of as extruded bar consists of elongated grains, however, fine equiaxed grains are mainly observed around surface. The microstructural gradient suggests that different restoration process can proceed during the hot extrusion. For B1 and B2, different grain growth behaviors are found around the surface during the post heat treatment. Rapid grain growth behavior around the surface is discussed related with the crystallographic orientation of the grain.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 춘계학술대회 논문집 유기절연재료 방전 플라즈마연구회
• /
• pp.1-5
• /
• 2003

This paper presented the effects of accumulation of surface charges on hydrophobicity level and the surface states of silicone polymer used for outdoor insulator treated by ultraviolet irradiation and corona discharge through measuring surface voltage decay of a corona-charged specimen were investigated. The surface resistivity by the method of the surface potential decay was compared with the value by the three electrodes methods. From this study, it was found that the accumulation of surface charges above a critical surface voltage on silicone insulating materials could lead to the temporary loss of surface hydrophobicity. In addtion, uv stress lead to a longer decay time of surface charges. We could conclude that the effects of surface charges on hydrophocity level and the changes of surface state by various artificial treatments were understood through a trend of surface potential decay.

• 건축역사연구
• /
• 제11권4호
• /
• pp.117-128
• /
• 2002

This paper aims at proposing constructional intention and aesthetic consciousness in the architecture of Jajang-temple, which was originally built by the great monk, Jajang in 7c. The results are as follows : 1) The layout and form of buildings in Jajang-temple were remarkably followed the situations and shapes of natural rocks related to Gumwa legend about the original establishment of the temple. 2) As natural rocks were penetrated into both the inner and outer space of buildings and so artificial skills were more or less restrained, it seems to be short of geometrical regularity, symmetry and formal integrity. 3) However it can be said that these architectural treatments were based on the aesthetic consciousness, so called In-Cha and Jol-Bak, which were conceived by intellectual elites in Chosun dynasty.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2003년도 Proceedings of the international symposium on the fusion technology
• /
• pp.540-543
• /
• 2003

There are many stone monuments which are weathered by natural or artificial factors in Korea. The partly weathering in stone could accelerate the rate of weathering, so it is demanded to keep them from the further weathering. Consolidation is evaluated as one of the efficient treatments which have a good effectiveness in stone monuments. But following the former researches, the effectiveness of consolidation could be different, related to the kinds of stone or consolidants. Therefore, in this study, the change of properties was monitored in the long term for the exact evaluation of the stability of the consolidated stone. It is estimated that the pore structure of consolidated stone was filled by consolidant, according to the measurements of ultrasonic velocity, and the digital image analysis of the sample was shown that the color property of stone surface has varied during the curing.

• 한국포장학회지
• /
• 제16권1호
• /
• pp.19-25
• /
• 2010

It is becoming increasingly important to utilize alternative raw materials for plastic industries other than petrochemical-based plastics. Cellulose derivatives were the bases of the original synthetic plastics. Cellulose and its derivatives, especially the widely used cellulose acetate (CA), constitute one of the main classes of raw materials for production on artificial fibers, films, plastics etc. CA is one of the well known polymers produced from naturally available plant substance. Many researches have focused on the isolation of cellulose from the plant cells to use them as cellulose derivatives and composite materials. Chemical and mechanical treatments provide changes on the molecular structures influencing the fundamental properties of these naturally abundant polymer. The aim of this review article is to review biodegradation, synthesis, formation, and utilization of cellulose esters, especially di-acetate, used in packaging related researches.

• Journal of Welding and Joining
• /
• 제11권1호
• /
• pp.2-8
• /
• 1993

A literature review was conducted to gather informations available on the welding metallurgy of aluminum alloys, emphasized on characteristics in the heat affected zone(HAZ). Nominal metallurgical reactions that occur in aluminum alloys provide a basis for understanding aluminum welding metallurgy. However, welding reactions differ to some extent because of the relatively short times involved, and the non-isothermal heating excursed. For non-heat treatable alloys, welding primarily affects these alloys by annealing (recrystallization and growth) and to a less extent, changes in low temperature precipitates. In the case of heat treatable alloys, the resulting HAZ properties depend upon alloy composition, starting temper, heat input and post weld heat treatments.