• Journal of Microbiology and Biotechnology
• /
• v.12 no.6
• /
• pp.979-985
• /
• 2002

The possibility of microalgal nitrogen treatment was tested in wastewaters with a low carbon/nitrogen (C/N) ratio. Chlorella kessleri was cultured in the two different artificial wastewaters with nitrate as a nitrogen source: one contained glucose for an organic carbon source and the other without organic carbon sources. The growth rates of the two cultures were almost identical when the aeration rate was over 1 vvm. These results suggest that microalgae could successfully remove nitrogen from wastewater, as far as the mass transfer of $CO_2$, was not limited. Nitrate was successfully reduced to below 2 mg $NO_3^-$-N/ml from the initial nitrate concentration of 140 mg $NO_3^-$-N/ml in 10 days, even in the wastewater with no organic carbon source. Similar results were obtained when ammonium was used as the sole nitrogen source instead of nitrate. Higher concentrations of nitrogen of 140, 280, 560 and 1,400 mg/ml were also tested and similar amounts of nitrogen were removed by algal cultures without showing any substrate inhibition.

• Journal of Microbiology and Biotechnology
• /
• v.8 no.4
• /
• pp.333-340
• /
• 1998

Streptomyces griseus trypsin (SGT) is an extracellular proteinase produced by S. griseus. The sprT gene, which encodes premature SGT protein, was cloned into the plasmid pWHM3, a Streptomyces-E. coli shuttle vector. When the recombinant plasmid was introduced into Streptomyces lividans TK24, two proteins with molecular weights of 28 kDa and 42 kDa were detected. The 28-kDa protein was a SGT protein while the larger 42-kDa protein is thought to have been a premature form of the SGT protein. The SGT protein was purified to homogeneity via ammonium sulfate fractionation and many column chromatographies, including CM -sepharose chromatography, Mono-S chromatography, and Superose-12 chromatography, from the culture broth of S. lividans TK24 harboring the sprT gene. The N-terminal amino acid sequence, isoelectric points, and stabilities at various conditions of the SGT proteins purified from the Pronase and transformant were almost identical. The amount of the expressed SGT in S. lividans TK 24 was determined to be 5 times more than that of S. griseus based on the enzymatic activity against artificial substrate.

• Journal of Magnetics
• /
• v.11 no.4
• /
• pp.182-188
• /
• 2006

The search for high-density recording materials has been one of most active and vigorous field in the field of magnetism. $FePt-L1_{0}$ nanoparticle has emerged as a potential candidate because of its high anisotropy. In this paper, we provide an overview of recent work at Argonne National Laboratory that contributes to the ongoing dialogue concerning the relation between structure and properties of the FePt nanoparticle system. In particular we discuss the ability to control structure and properties via dosing with Cr. Cr-dosed FePt films were grown via molecular beam epitaxy and annealed at $550^{\circ}C$ in an ultrahigh vacuum chamber, and were studied with the surface magneto-optic Kerr effect (SMOKE), scanning electron microscopy (SEM) and x-ray magnetic circular dichroism (XMCD). We found that small dosage of Cr helps to generate $L1_{0}$ phase FePt magnetic nanoparticles with small size, defined shape and regular spatial distribution on MgO (001) substrate. The nanostructures are ferromagnetic with high magnetic coercivity (${\sim}0.9T$) and magnetic easy axis in the desired out-of-plane orientation. We also show that controlling the lateral region where nanostructures exist is possible via artificial patterning with Cr.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.5
• /
• pp.7-12
• /
• 2010

The bandwidth of a Jerusalem AMC was investigated based on the equivalent circuit model. Using the circuit model and the derivative of the admittance(Y'), the relation between the bandwidth and various circuit parameters was analyzed. It was shown that the substrate thickness and permeability enhance the bandwidth whereas the loadings on FSS grid degrade the bandwidth. Among the two loadings, the capacitive loading had better bandwidth characteristics than the inductive loading. AMC with single polarization was suggested to relax the bandwidth degradation by the inductive loading.

• The Korean Journal of Ceramics
• /
• v.6 no.1
• /
• pp.27-31
• /
• 2000

A series experiments were performed to evaluate mechanical behavior of non-oxide boride type ceramics formed on the AISI 1040 plain carbon steel. Boronizing was performed in a slurry salt bath consisting of borax, boric acid, and ferro-silicon at $950^{\circ}C$ for 2-6h. The AISI 1040 steel used as substrate material was containing 0.4%C, 0.13%Si, 0.65%Mn, 0.02%P, 0.014%S. The presence of non-oxide boride type ceramics $Fe_2B $ and FeB formed on the surface of steel was confirmed by metallographic technique and X-ray diffraction (XRD) analysis. The hardness of borides measured via Vickers indenter with a load of 2N reached a microhardness of up to 1800 DPN. The hardness of unborided steel was 185 DPN. The fracture toughness of borides measured by means of Vickers indenter with a load of 10N was about 2.30 MPa.$m^{1/2}$. The thickness of boride layers ranged from 72$\mu\textrm{m}$ to 145$\mu\textrm{m}$. Boride layers have a columnar morphology.

• Journal of the Korean institute of surface engineering
• /
• v.29 no.6
• /
• pp.753-759
• /
• 1996

The artificial construction of well-defined low-dimensional (low-D) quantum structures, such as quantum wire (QWR) still attracts attention of many researchers due to their applications in room-temperature optoelectronic devices. In this work, the migration enhanced epitaxial growth (MEE) and the analysis of InAs/ AlAs QWR are reported. On the vicinal semi-insulating InP substrate of $3^o$ tilted cut from (100) surface towards (010) direction, InAs/ AlAs QWR superlattices have been successfully grown by MEE with the introduction of growth interruption at each shutter operation of MBE cell. The in-situ RHEED analyses show that MEE gives superior step-flow growth (SFG) and sharper interface formation over a conventional MBE growth. We have grown 4 samples in series varying the growth temperature. The QWR samples are analyzed by photoluminescence (PL) and atomic force microscopy (AFM). From the AFM images, we can get the definitely resolved 1-D structures. This structure is believed to be due to the MEE method and its separation is better than any other data from others. We are now studying the dependence of the structure on the growth temperature.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.36 no.5
• /
• pp.469-473
• /
• 2003

Transplantation of Sargassum horneri to natural substrate using the rope seeding method was undertaken. Seeding of S. horneri was grown on net in an indoor tank up to 0.2-0.3 cm in frond length for 2 months, and then transplanted to an architecture tile $(10\times10\;cm)$ with underwater glue and an iron pipe. After two months, number of S. horneri on the tile decreased because of grazing by herbivores. However, S. horneri on the iron pipe grew up to 0.5-2.0 cm in frond length. After 7 months, they rapidly grew up to a frond length of 11.0-203.0 cm with a mean frond length of 122.6 cm. S. horneri grew up to a maximum frond length of 313.0 cm, and mean frond length of 228.0 cm, after 10 months. The artificial S. hornevi beds can be used to clean the seawater and also be utilized as a source of marine biomass as well as for supplying habitat, shelter and spawning beds for fish and invertebrates.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.10 s.175
• /
• pp.186-194
• /
• 2005

This study was designed to investigate the mechanical properties of the coating layer on electronic galvanized sheet steel as a part of the ongoing research on the coated steel. Those properties were determined using nano-indentation, the finite element method, and artificial neural networks. First and foremost, the load-displacement curve (the loading-unloading curve) of coatings was derived from a nano-indentation test by CSM (continuous stiffness measurement) and was used to measure the elastic modulus and hardness of the coating layer. The properties derived were applied in FE simulations of a nano-indentation test, and the analytical results were compared with the experimental result. A numerical model for FE simulations was established for the coating layer and the substrate separately. Finally, to determine the mechanical properties of the coating, such as the stress-strain curve, functional equations of loading and unloading curves were introduced and computed using the neural networks method. The results show errors within $5\%$ in comparison with the load-displacement measured by a nano-indentation test.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.35 no.7
• /
• pp.713-720
• /
• 2011

This study investigated the effect of cold acclimatization training on body composition including weight, fat mass, and muscle mass with 10 subjects (5 males and 5 females). During the 3-week acclimatization training program, they visited an artificial climate chamber ($15^{\circ}C$) 15 times and were exposed to cold environment with light clothing for 2 hours. Body composition was measured before and after cold training using bioelectric impedance analysis that was later compared by a paired t-test. In the process of thermoregulation, muscle contraction was accompanied by increased substrate metabolism for rising heat production. After cold training, the muscle mass increased and fat mass decreased significantly (p<.1, p<.05), subsequently the body composition changed. It was found that cold acclimatization training could be used as a treatment for obesity. It was suggested that further investigation on the long term effects of mild cold exposure using clothing and its potential applicability as an obesity treatment.

• Food Science and Preservation
• /
• v.7 no.1
• /
• pp.1-7
• /
• 2000

To develop natural antimicrobial agents for keeping qualities of postharvested greenhouse produce the antimiocrobial actions of Polygonum cuspidatum Sieb. et Zucc. extract , which showed remarkable antimicrobial effects against microorganism causing the postharvest decay of greenhouse produce, were investigate. In the inhibitory experiment of enzymes related to energy production metabolism hexokinase activities decreased to 73% and 68% by treating with Polygonum cuspidatum Sieb. et.Zucc. extract and Eugenia caryophyllata Thumnberg extract in comparison with control, respectively. Direct visualization of microbial cells by using both transmission electron microscope and scanning electron microscope showed that microbial cell membrane was destroyed by treating with the dilute extract solution. this change of celluloar membrane permeability could be identified in the experiment that 0-nitrophenyl-${\beta}$-D-galactopyrano-side(ONPG), the artificial substrate of ${\beta}$-galactosidase, was hydrolyzed in the presence of the extract, indicating that the membrane was perturbed. The separation and identification of the most antimicrobialo substances isolated from Polygonum cuspidatum Sieb et. Zucc. extract and Eugenia caryophyllata Thunberg extract were carried out by using gas chromatography and mass spectrometry 9GC/MSD), which were identified as eugenol. As a result, the functionality of Polygonum cuspidatum Sieb. et Zucc. extract and Eugenia caryophyllata Thunberg extract as antimicrobial agents for keeping qualities of postharvested greenhouse produce may be recommended.