• Structural Engineering and Mechanics
• /
• 제26권5호
• /
• pp.591-615
• /
• 2007

An improvement is introduced to solve the plane problems of linear elasticity by reciprocal theorem for orthotropic materials. This method gives an integral equation with complex kernels which will be solved numerically. An artificial boundary is defined to eliminate the singularities and also an algorithm is introduced to calculate multi-valued complex functions which belonged to the kernels of the integral equation. The chosen sample problem is a plate, having a circular or elliptical hole, stretched by the forces parallel to one of the principal directions of the material. Results are compatible with the solutions given by Lekhnitskii for an infinite plane. Five different orthotropic materials are considered. Stress distributions have been calculated inside and on the boundary. There is no boundary layer effect. For comparison, some sample problems are also solved by finite element method and to check the accuracy of the presented method, two sample problems are also solved for infinite plate.

• 치과방사선
• /
• 제25권1호
• /
• pp.127-132
• /
• 1995

A number of panoramic radiographic images of the condylar head taken at various horizontal angulations were compared. A small artificial osteophyte was attached to the eight different portions of the condylar head and a small hole was created in four different portions of the condylar head. Three oral and maxillofacial radiologists evaluated the panoramic condylar images. The results were as follows : 1. Osteophytes in the superomedial, anterocentral and anterolateral portions could be detected easily, but those in the lateral, superolateral and medial portions were very hard to identify. 2. The greater the condylar horizontal angle, the easier it was to detect an osteophyte. But there was no statistically significant difference except between 0 and 40 degrees of horizontal angulation. 3. Holes in the anterocentral and superocentral portions could be detected easily, but those in the lateral and medial portions were very hard to identify. There were no differences between the various condylar horizontal angles.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집A
• /
• pp.458-463
• /
• 2000

The mechanical structures generally have discontinuous parts such as the cracks, notches and holes owing to various reasons. In this paper, in order to analyze effectively these singularity problems using the finite element method, a mixed analysis method which an analytical solution and finite element solutions are simultaneously used is newly proposed. As the analytical solution is used in the singularity region and the finite element solutions are used in the remaining regions except this singular zone, this analysis method reasonably provides for the numerical solution of a singularity problem. Through various numerical examples, it is shown that the proposed analysis method is very convenient and gives comparatively accurate solution.

• 한국산학기술학회논문지
• /
• 제12권7호
• /
• pp.3169-3175
• /
• 2011

본 논문에서는 가유전체 기판구조의 증가하는 유효 유전율 효과를 이용하여 방향성결합기를 소형화하여 설계하는 것에 대하여 기술한다. 방향성결합기는 RF 신호의 크기를 간접적으로 측정하거나 신호전력을 결합하는데 널리 사용되는 회로이다. 가유전체 기판구조는 다수의 도금된 비어홀에 의하여 표준형 기판보다 유효 유전율이 증가하는 특성을 지니는데, 이 특성이 바로 회로 소형화에 이용된다. 한 예로써 2GHz대에서 15dB의 결합계수를 갖는 방향성결합기가 표준형 기판과 가유전체 기판구조에 대하여 각각 설계되고 그 크기가 비교된다. 표준형 회로와 비교할 때, 가유전체 기판구조로 소형화된 방향성결합기는 동일한 성능을 유지하면서도 1/3로 줄어든 회로의 크기를 갖는다. 또한 소형화된 방향성결합기를 제작하여 측정한 성능은 예측 결과와도 매우 유사함을 보여준다. 측정한 성능 결과는 2GHz대에서 -14.62B의 결합도, -24.1dB의 정합도, -0.38dB의 삽입손실 특성을 보여준다.

• 한국수자원학회논문집
• /
• 제51권11호
• /
• pp.959-969
• /
• 2018

노후화된 상수관로는 단수유발, 수압부족 및 수질악화, 싱크홀 발생 피해와 누수로 인한 경제적 손실 등을 초래한다. 하지만 모든 노후관로를 일시에 보수 및 교체하는 것은 불가능하므로, 사용 중인 관로의 노후도를 정량적으로 판단하여 상수관로의 개량 우선순위를 결정해야 한다. 본 연구에서는 ANN(Artificial Neural Network)-Clustering 기법이 상수관로의 노후도 평가를 위한 새로운 평가방법이 될 수 있음을 제시하였다. 본 연구는 전라남도 YG지역의 배수관로를 적용대상으로 진행하였으며, 관망성능평가 항목을 이용하여 전체 관로를 세 개의 등급으로 분류하여 노후도를 평가하였다. 또한, 본 연구의 적용 가능성을 판단하기 위하여 실무에서 적용 중인 점수평가법 결과와 비교분석을 실시하였으며, 전체 대상관로의 노후도 정도를 직관적으로 파악할 수 있도록 산정된 노후도 등급을 관망도에 도시하였다. 본 연구에서 제안한 노후관로 평가기법은 관로의 다양한 특성값을 손쉽게 변경하여 적용할 수 있으며, 점수평가법과 더불어 상수관로의 유지관리를 위한 객관적이고 합리적인 관망성능평가법이 될 수 있을 것으로 기대한다.

• Journal of the Korean Wood Science and Technology
• /
• 제50권4호
• /
• pp.246-255
• /
• 2022

The need for non-destructive testing and evaluation of Korean traditional wooden buildings is increasing because of their widespread deterioration. Among all types of deterioration, termite damage in wooden columns is the most difficult to detect with the naked eye because it starts inside the wood, and the initial deterioration is small. X-ray computed tomography (CT) is the best technology to investigate the inner state of wood that has less damage, but applying it to wooden columns between walls is challenging. Therefore, the feasibility of tomosynthesis, which is a method to reconstruct a coronal section of a subject with a few X-ray projections from a limited angle of rotation, was studied as an alternative to CT. Pine (P. densiflora) with three artificial holes was prepared as a specimen to evaluate the quality of reconstructed tomosynthesis images according to the different number of projections. The quality of the tomosynthesis images in the in-focus plane was evaluated using the contrast-to-noise ratios, while a vertical resolution between the images was assessed by determining the artificial spread function. The quality of the tomosynthesis image in the in-focus plane increased as the number of projections increased and then remained constant as the number of projections reached 21 or over. In the case of vertical resolution, there was no significant difference when 21 projections or more were used to reconstruct the images. A distinct difference between coronal section images was found when the distance was more than 10 mm from one plane to another plane.

• 로봇학회논문지
• /
• 제12권4호
• /
• pp.411-418
• /
• 2017

During the intramedullary nailing procedure, surgeons feel difficulty in manipulation of the X-ray device to align it to axes of nailing holes and suffer from the large radiation exposure from the X-ray device. These problems are caused by the fact the surgeon cannot see the hole's location directly and should use the X-ray device to find the hole's location and direction. In this paper, we proposed the robotic guidance of the distal screwing using an optical tracking system. To track the location of the hole for the distal screwing, the reference marker is attached to the proximal end of an intramedullary nail. To guide the drill's direction robustly, the 6-degree-of-freedom robotic arm is used. The robotic arm is controlled so as to align the drill guiding tool attached the robotic arm with the obtained the hole's location. For the safety, the robot's linear and angular velocities are restricted to the predefined values. The experimental results using the artificial bones showed that the position error and the orientation error were 0.91 mm and $1.64^{\circ}$, respectively. The proposed method is simple and easy to implement, thus it is expected to be adopted easily while reducing the radiation exposure significantly.

• 복식문화연구
• /
• 제19권5호
• /
• pp.957-969
• /
• 2011

This study intended to analyze the grunge look as a mode of expression and as a characteristic of the fashion of the 21st century, arguing that the look expressed not only an outward appearance or sub-culture but also a change in our attitude and spirit about contemporary fashion. In the study, I carried out an empirical analysis focused on the collection from 2001S/S to 2010F/W and a literature review. In my results, I classified the grunge look into the following categories: 1. mix and match layering; 2. patchwork, collages, and assemblage using all objects as well as clothing materials; and 3. distressing techniques, such as bleaching and dyeing, unweaving, and tears and holes. I also classified the characteristics of grunge into the following categories: 1. conspicuous destitution, which is intentionally expressed by skillful techniques and craftsmanship, indicating that modern people want to attract attention and be distinguished from others, which reflects an attitude of superiority through ironic fashion choices; 2. high lighting the dissolution of decoration, where destruction, poverty and recombination shown in the grunge look emerged as an artificial and intentional ugly aesthetic in contrast to the existing elegant and sophisticated image; and 3. satire and playfulness, as grunge expresses alienation and conflict in modern society through satire and sarcasm, not attacking or avoiding, but through playful and sarcastic engagement so as to decrease poverty and give temporary freedom.

• 한국정밀공학회지
• /
• 제15권7호
• /
• pp.149-159
• /
• 1998

The importance of soundness and safety evaluation in weld zone using by the ultrasonic wave has been recently increased rapidly because of the collapses of huge structures and safety accidents. Especially, the ultrasonic method that has been often used for a major non-destructive testing(NDT) technique in many engineering fields plays an important role as a volume test method. Hence, the defecting any defects of weld Bone in austenitic stainless steel type 304 using by ultrasonic wave and neural network is explored in this paper. In order to detect defects, a distance amplitude curve on standard scan sensitivity and preliminary scan sensitivity represented of the relation between ultrasonic probe, instrument, and materials was drawn based on a quantitative standard. Also, a total of 93％ of defect types by testing 30 defect patterns after organizing neural network system, which is learned with an accuracy of 99％, based on ultrasonic evaluation is distinguished in order to classify defects such as holes or notches in experimental results. Thus, the proposed ultrasonic wave and neural network is useful for defect detection and Ultrasonic Non-Destructive Evaluation(UNDE) of weld zone in austenitic stainless steel 304.

• 한국잠사곤충학회지
• /
• 제50권2호
• /
• pp.63-70
• /
• 2012

본 연구는 국내 서식하는 아메리카동애등애(BSF)의 생태특성 구명 및 가축분뇨를 이용한 BSF의 실내 인공사육을 통하여 가축분뇨나 음식물쓰레기 처리 시 대량으로 요구되는 유충생산을 위하여 실내 인공증식기술 개발하고 BSF의 가축분뇨 분해 능력을 검정하였다. BSF는 축사를 중심으로 하는 즉 유기성 폐기물이 야적되어 있는 장소의 생태계 내에서 서식한다는 것을 확인하였으며, 축사, 퇴비사, 생활쓰레기장, 음식물쓰레기장 주변이 주 서식지임을 확인하였다. 가축분뇨 분해 우수 종은 BSF(Hermetia illucens), 동에등에(Ptecticus tenebrifer) 등 2종으로 확인되었다. 가축분뇨에 따른 BSF의 분해능은 BSF 유충 마리당 돈분 0.5 g, 우분 0.43 g, 계분 0.3 g순으로 돈분이 가장 우수하였다. 가축분뇨별 BSF 유충의 분해에 따른 무게는 우분 83.62, 돈분 77, 계분 80%로 우분이 분해 후 무게 감소가 가장 컸다. 가축분뇨 분해에 따른 BSF 유충 및 번데기 형질은 돈분이나 돈분 +왕겨를 혼합하여 처리했을 때 유충이나 번데기의 길이, 무게 폭이 다른 처리구에 비해 좋았다. BSF 실내 대량증식에 있어서 용화율 및 우화율에는 큰 차이를 보이지 않았으나 교미 산란에 있어서 중요한 요소인 광조건 변화에 의한 계절적 교미율의 차이를 보였다. 계절에 따른 BSF의 교미율을 보면 5월에서 7월까지 교미가 활발하게 이루어 졌으며, 시간대는 오전 10시부터 12시까지 가장 활발하게 교미를 하였다. 인공채란을 위한 산란배지는 음식물과 송아지 사료가 가장 우수하였고, 산란실($W{\times}D{\times}H=4{\times}2{\times}2m$) 내 적정 배지투입 수는 8개, 성충은 2000두 투입구가 가장 산란효율이 높았다. 산란유도재료로 플라워폼과 목재에 구멍을 뚫어 산란을 유도하였으며, 산란장소의 구멍크기는 3~5 mm, 깊이 7~10 mm의 크기를 가장 선호하였다. 유충은 2~4두/$cm^2$의 밀도로 사육하는 것이 과밀도(6~10두/$cm^2$) 보다 실용형질이 우수하였다. 번데기 적정보호조건은 매질(톱밥)을 사용하여 은신처를 제공해야하며, 톱밥의 습도는 20~40%가 가장 좋았다. 성충은 우화 즉시 사용해야하나, 용화 후 10에서 10일 처리한 경우 우화율 93.3%로 우화시기를 약 10일 정도 조절이 가능하였다.