• 한국정보통신학회논문지
• /
• 제12권10호
• /
• pp.1897-1902
• /
• 2008

영상에 나타난 콘크리트 표면의 균열은 그 획득 과정에서 빛이나 외부환경에 의해 훼손되는 경우가 발생한다. 또한 콘크리트 표면이 고르지 않고 균열과 표면의 명암도 차이가 거의 없기 때문에 정확한 균열을 검출하기 어렵다. 따라서 본 논문에서는 콘크리트 표면 영상을 밝기에 따라 여러 영역으로 구분하기 위해 ART2 기반 양자화를 적용한다. 양자화된 영역에서 균열과 잡음의 분포를 조사하여 균열과 잡음이 같이 존재하는 영역에서는 잡음 제거 과정을 수행한 후, 균열 후보 영역을 추출하고 균열 후보 영역에서 형태학적인 정보를 이용하여 잡음을 제거하여 최종 균열 영역을 검출한다. 실제 콘크리트 표면 균열 영상을 대상으로 실험 한 결과, 제안한 방법이 기존의 방법보다 콘크리트 표면의 밝은 영역에서 균열이 비교적 정확히 검출되는 것을 확인하였다.

• Journal of Electrical Engineering and Technology
• /
• 제11권2호
• /
• pp.529-536
• /
• 2016

In this paper we proposed an unsupervised algorithm to estimate the reverberation time (RT) directly from the reverberant speech signal. For estimation process we use maximum likelihood estimation (MLE) which is a very well-known and state of the art method for estimation in the field of signal processing. All existing RT estimation methods are based on the decay rate distribution. The decay rate can be obtained either from the energy envelop decay curve analysis of noise source when it is switch off or from decay curve of impulse response of an enclosure. The analysis of a pre-existing method of reverberation time estimation is the foundation of the proposed method. In one of the state of the art method, the reverberation decay is modeled as a Laplacian distribution. In this paper, the proposed method models the reverberation decay as a Gamma distribution along with the unification of an effective technique for spotting free decay in reverberant speech. Maximum likelihood estimation technique is then used to estimate the RT from the free decays. The method was motivated by our observation that the RT of a reverberant signal when falls in specific range, then the decay rate of the signal follows Gamma distribution. Experiments are carried out on different reverberant speech signal to measure the accuracy of the suggested method. The experimental results reveal that the proposed method performs better and the accuracy is high in comparison to the state of the art method.

• 한국세라믹학회지
• /
• 제46권6호
• /
• pp.548-553
• /
• 2009

This study is on the application of ceramic body and art glaze by using coal ash according to each wt%. Body color was turned red and dark as increasing coal ash contents in the body and art glaze because of the effect of noncombustible carbon in $Fe_2O_3$ and coal ash. Not only pore and black core were generated but also absorptance and shrinkage were increased as increasing coal ash contents. The glaze of coal ash 20 wt% showed blue absorption band, turned red band as increasing coal ash contents, $Al_2O_3\;to\;SiO_2$ ratio got lower and became mat because glaze is estranged from $Al_2O_3\;to\;SiO_2$ mol ratio 1:10 of transparent glaze as increasing coal ash contents. Glaze showed unstable dissolving condition in the more coal ash contents.

• Structural Engineering and Mechanics
• /
• 제6권1호
• /
• pp.41-61
• /
• 1998

A state-of-the-art report on the new finite elements formulated by the addition of nonconforming displacement modes has been presented. The development of a series improved nonconforming finite elements for the analysis of plate and shell structures is described in the first part of this paper. These new plate and shell finite elements are established by the combined use of different improvement schemes such as; the addition of nonconforming modes, the reduced (or selective) integration, and the construction of the substitute shear strain fields. The improvement achieved may be attributable to the fact that the merits of these improvement techniques are merged into the formation of the new elements in a complementary manner. It is shown that the results obtained by the new elements give significantly improved solutions without any serious defects such as; the shear locking, spurious zero energy mode for the linear as well as nonlinear benchmark problems. Recent developments in the transition elements that have a variable number of mid-side nodes and can be effectively used in the adaptive mesh refinement are presented in the second part. Finally, the nonconforming transition flat shell elements with drilling degrees of freedom are also presented.

• Journal of information and communication convergence engineering
• /
• 제1권3호
• /
• pp.99-103
• /
• 2003

Classes are apt to include useless codes and inadequate inheritance relationship between them when they are being updated, inserted and deleted during the evolution process of object-oriented software, leading to lots of errors. Conventional class restructuring methods degrade the effectiveness of reusability since they go with preprocesses such as dependency analysis and estimation of class cohesion and run statically. In this paper, we propose a new C＋＋ class-restructuring algorithm that does not require those preprocesses and runs dynamically by improving ART learning algorithm in the artificial neural networks.

• Earthquakes and Structures
• /
• 제15권1호
• /
• pp.45-65
• /
• 2018

Over the last three decades, Performance-based Earthquake Engineering (PBEE) has been mainly developed for high seismicity regions. Although information is abundant for PBEE throughout the world, the application of PBEE to lower-seismicity regions, such as those where the magnitude of the maximum considered earthquake (MCE) is less than 6.5, is not always straightforward because some portions of PBEE may not be appropriate for such regions due to geological differences between high- and low-seismicity regions. This paper presents a brief review of state-of-art PBEE methodologies and introduces the seismic hazard of lower-seismicity regions, including those of the Korean Peninsula, with their unique characteristics. With this seismic hazard, representative low-rise RC MRF structures and high-rise RC wall residential structures are evaluated using PBEE. Also, the range of the forces and deformations of the representative building structures under the design earthquake (DE) and the MCE of South Korea are presented. These reviews are used to propose some ideas to improve the practice of state-of-art PBEE in lower-seismicity regions.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2007년도 춘계학술발표대회
• /
• pp.457-458
• /
• 2007

Clustering plays an indispensable role for data analysis. Many clustering algorithms have been developed. However, most of them suffer poor performance of learning. To archive good clustering performance, we develop a hybrid neural network model. It is the combination of Multi-Layer Perceptron (MLP) and Adaptive Resonance Theory 2 (ART2). It inherits two distinct advantages of stability and plasticity from ART2. Meanwhile, by combining the merits of MLP, it improves the performance for clustering. Experiment results show that our model can be used for clustering with promising performance.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 춘계학술대회 논문집
• /
• pp.169-175
• /
• 1996

We provide a fudamental set of information on technologies in the area of mechanical engineering to draw action plans for intermationalization of the National R&D activites. First, we design and use a modified Delphi method to evaluate levels of our technological capabilities and developed countries' as well. We investigate technology acquistion methodolgies, technology characteristcs and various aspects of international cooperation in terms of technology. Secondly, we analyze final responses of participants (i.e,. the third round results of Delphi method) tosee the correlation between various factors in developing mechanical engineering technologies through international cooperation. The technology classification used in this research is developed by STEPI (Science and Technology Policy Institute).

• 국제초고층학회논문집
• /
• 제2권3호
• /
• pp.193-212
• /
• 2013

The Endless Column by Constantin Brâncuşi is "the most radical sculpture in the history of classic modernism", "the only one of modern times that can be compared with the great Egyptian, Greek and Renaissance monuments". It "is not only an artistic masterpiece, but also an extraordinary feat of engineering", the greatest example of collaboration between a sculptor and an engineer. This article illustrates the path that led the artist to conception of the column, its planning and construction, the investigations on preservation of the monument and its restoration, the aerodynamic tests in the wind tunnel, the modeling of the wind and the structure in virtue of which the aeroelastic instability, dynamic response and fatigue life were investigated. The conclusions discuss the column's role in the panorama of the great works of modern engineering.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2004년도 춘계학술대회
• /
• pp.335-338
• /
• 2004

Life-Cycle Engineering(LCE) is a decision-making methodology that considers environmental and cost needs during the product life-cycle. Environmental conscious design and manufacturing has become more and more important and it has been enforced by governmental regulations and used as trade restriction. LCE involves integrating environmental consideration into new product development including design, material selection, manufacturing processes and distribution of the product to the consumers, plus the end-of-life management such as disassembly, material recovery, remanufacturing of the product after discarding it. In this paper, a state-of-the-art survey of LCE is presented.