• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.15 no.4
• /
• pp.232-241
• /
• 2003

The interaction of incident monochromiatic waves with N bottom-mounted porous circular cylinders is investigated in the frame of three-dimensional linear potential theory. The fluid domain is divided into N+l regions i.e. a single exterior region and N interior regions, and the diffraction potential in each fluid region is expressed by an eigenfunction expansion method (Williams and Li,2000). The analytic results show that the porous structure reduces both the wave forces and the run-up wave around the cylinder. To verify the developed model, the systematic model test with a line array of porous cylinders is conducted at the wave tank (30m$\times$7m$\times$1.5m). The analytic results are in good agreement with the experimental results within measured frequency range. It is concluded that the breakwater constructed with an array of porous circular cylinders shows the performance of an effective wave barrier together with the seawater-exchange effect and is considered to have vast potentials for the use of seawater-exchanging breakwater in the future.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.12
• /
• pp.1243-1251
• /
• 2009

This paper presents design and test results of X-Band Transmit/Receive(T/R) module for active phased-array radar. Active phased array radars typically require solid state T/R modules with high output power, low noise figure, high Third Order Intercept(TOI), and sufficient gain in both transmit and receive. The output power of the module is 9 watts over a wide bandwidth. The noise figure is as low as 2.8 dB. Phase and amplitude are controlled by the 6-bit phase shifter and 5-bit attenuator, respectively. Highly integrated T/R module is achieved by using LTCC(Low Temperature Co-fired Ceramic) multiple layer substrate. The module incorporates a compact digital interface, requires only three supply voltages.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.6
• /
• pp.1031-1036
• /
• 2019

This study describes the technique of the beam pattern measurement of array antenna for VHF band radar using drone and active beam pattern measuring device. There is no anechoic chamber for measuring the beam pattern of a large size antenna in the country. In this study, to test the antenna beam pattern characteristics of the developed VHF band radar, the antenna beam pattern characteristics were tested by Drone mounting an Active Beam Pattern Measuring Device. By comparing the results of the pre-simulation analysis with the measured results for the antenna, we could confirm that the beamwidth and side-lobe characteristics are satisfactory. Through the antenna beam pattern measurement technology using Drone and Active Beam Pattern Measuring Device, the beam pattern measurement technology of array antenna of low frequency band and large antenna for low band radar will be used.

• Journal of the Microelectronics and Packaging Society
• /
• v.14 no.4
• /
• pp.71-77
• /
• 2007

In this study, the mechanical and electrical properties of three different ball grid array (BGA) solder joints, consisting of Sn-37Pb, Sn-3.5Ag and Sn-3.5Ag-0.75Cu (all wt.%), with organic solderability preservative (OSP)-finished Cu pads were investigated as a function of reflow number. Based on scanning electron microscopy (SEM) analysis results, a continuous $Cu_6Sn5$, intermetallic compound (IMC) layer was formed at the solder/substrate interface, which grew with increasing reflow number. The ball shear testing results showed that the shear force peaked after 3 reflows (in case of Sn-Ag solder, 4 reflows), and then decreased with increasing reflow number. The electrical property of the joint gradually decreased with increasing reflow number.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.6
• /
• pp.295-301
• /
• 2014

In the absence of a sorting algorithm faster than O(n log n), Quicksort remains the best and fastest of its kind in practice. For given n data, Quicksort records running in O(n log n) at best and $O(n^2)$ at its worst. In this paper, I propose an algorithm by which 3-points average P=(L+M+H)/3 is set as a pivot for first array L=a[s], last array H=a[e], and middle array $M=a[{\lfloor}(s+e)/2{\rfloor}]$ in order to find the more fast than Quicksort. Test results prove that the proposed 3-points average pivot Quicksort has the time complexity of O(n log n) at its best, average, and worst cases. And the proposed algorithm can be reduce the $O(n^2)$ time of Quicksort to O(n log n).

• Journal of the Earthquake Engineering Society of Korea
• /
• v.5 no.6
• /
• pp.29-35
• /
• 2001

The soil-structure interaction(SSI) analysis is essential to soil site where shear wave velocity is less than 1,050 m/sec and soil nonlinear characteristics for this kind of soil site have to be considered in SSI analysis. In order to consider soil nonlinear characteristics in the SSI analysis, simple and reliable soil nonlinear evaluation technique with seismic recorded data at downhole array is proposed in this study. The SSI analysis is carried out in order to prove the reliability of the proposed evaluation technique with Hualien large scale seismic test(HLSST) site in Taiwan. The analytical result are compared with Hualien earthquake recorded data and the analytical results with SHAKE program which is prevailed at present. As a result, the proposed evaluation technique shows a good agreement with both the Hualien earthquake recorded data and the analytical result with SHAKE program and the reliability and usefulness are confirmed.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.1
• /
• pp.33-39
• /
• 2008

In this paper, a broadband rectangular reflector antenna with 16-array elements for WiBro/WiMAX band(2.3${\sim}$3.5 GHz) is designed, and its radiation characteristics are investigated. The designed antenna is composed of the IBBD(Integrated Balun Bow-tie Dipole) elements and has the feed circuit at the rear of the reflector to reduce the unwanted electromagnetic wave from it. To confirm the broadband characteristics of the designed antenna, test antenna is fabricated and its radiation characteristics are measured, compared with calculated results. The measured results show good agreement with the calculated results. As a result of measurements, 1.8GHz of bandwidth(VSWR<1.6) is achieved at $2.06{\sim}3.89GHz$ and the antenna gain over 10.3 dBi. We confirm that the designed antenna can be used as a broadband antenna for WiBro/WiMAX.

• Journal of Korean Society of Forest Science
• /
• v.94 no.4 s.161
• /
• pp.281-286
• /
• 2005

Trees enhance slope stability against down slope mass movement through the removal of soil water by transpiration and by the mechanical reinforcement of their roots. To assess the magnitude of this reinforcement on natural slope stability, direct shear tests were made on dry sand reinforced with different array types of roots. Pinus koraiensis was used as root specimens. The peak shear resistance at each normal stress level was measured on the rooted and unrooted soil specimens. Increased soil resistance(${\Delta}S$) by roots was calculated using parameters like internal friction angle and cohesion of tested soil and also evaluated the effects of root array in tested soil. As results, we find that shear resistance increased in tested soil shear box as diameters and arrayed numbers of root specimen increased and cross root array in tested soil had a much greater reinforcing effect than other root arrays. Comparison of traditional root-soil model with experiments showed that simulated reinforce strength by the model was different with those obtained by the experiment due to its linearity.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.4
• /
• pp.637-642
• /
• 2020

In this study, the SLB(Sidelobe Blanking)/BLB(Blacklobe Blanking) design of the VHF band radar using the low-frequency band having a relatively larger beam width than the S-band or X-band radar. The antenna of the VHF band has a relatively large beam width, so it is reflected from the side lobe. If the reflected target signal is not processed into sidelobe, the false alarm rate of the radar increases by recognizing it from the main lobe signal. This method of SLB blocking is the elimination of the side lobe signal in the front of the array antenna using the central radiating element of the array antenna, and the blocking of side lobe signal from the antenna rear through BLB receiver block. After completed the radar implementation, The function of blocking of side lobe signals was confirmed through the system unit test by Simulated signal generator. Through this study, it will be used in the implementation of the side-lobe blocking technology of the array antenna for low-frequency band radar with large antenna size and beam width in the future.

• The Journal of the Acoustical Society of Korea
• /
• v.38 no.2
• /
• pp.200-206
• /
• 2019

In this paper, the characteristics of receiving voltage sensitivity about acoustic package in towed array sonar is analyzed through the numerical simulation and design of experiments. Simulation results show that the variation of receiving voltage sensitivity is caused by the structural resonance mode shape on baseline acoustic package. The effect of design parameters of the acoustic package are analyzed through the design of experiments to reduce the deviation of receiving voltage sensitivity. A change of hydrophone shield can thickness (t) is the greatest effect on the deviation of receiving voltage sensitivity. As a result of water tank test, the acoustic package derived from the design of experiments has reduced deviation of receiving voltage sensitivity.