• Journal of Biosystems Engineering
• /
• 제34권2호
• /
• pp.95-105
• /
• 2009

A method was proposed which employed control of the drop location of fertilizer particles on a spinner disc to optimize the spread pattern uniformity. The system contained an optical sensor as a feedback mechanism, which measured discharge velocity and location, as well as particle diameters to predict a spread pattern of a single disc. Simulations showed that the feed gate adaptation algorithm produced high quality patterns for any given application rate in the dual disc spreader. The performance of the feed gate control method was assessed using data collected from a Sulky spinner disc spreader. The results showed that it was always possible to find a spread pattern with an acceptable CV lower than 15%, even though the spread pattern was obtained from a rudimentary flat disc with straight radial vanes. A mathematical optimization method was used to find the initial parameter settings for a specially designed experimental spreading arrangement, which included the feed gate control system, for a given flow rate and swath width. Several experiments were carried out to investigate the relationship between the gate opening and flow rate, disc speed and particle velocity, as well as disc speed and predicted landing location of fertilizer particles. All relationships found were highly linear ($r^2$ > 0.96), which showed that the time-of-flight sensor was well suited as a feedback sensor in the rate and uniformity controlled spreading system.

• 헤리티지:역사와 과학
• /
• 제52권4호
• /
• pp.18-37
• /
• 2019

국립중앙박물관의 외규장각 의궤 중 운보문단(雲寶紋緞) 책의(冊衣)를 대상으로 운보문의 편년 설정 방법을 도출한 결과는 다음과 같다. 첫째, 외규장각 의궤 중 운보문단 책의는 현종 즉위년(1659) 『효종국장도감의궤(상·하)』부터 영조 20년(1744) 『사도세자가례도감의궤』까지 86년간 89책(冊)에서 사용되었다. 둘째, 의궤 책의에 사용된 보문 종류는 14종으로 파악되었는데 잡보(雜寶)인 금정(金錠), 만자(卍字), 방승(方勝), 방승(쌍), 보주(寶珠), 산호(珊瑚), 서각(犀角), 서보(書寶), 애엽(艾葉), 여의두(如意頭), 전보(錢寶), 전보(쌍), 특경(特磬), 화보(畵寶)이다. 셋째, 운보문 판독 방법은 다음과 같다. (1)보문의 명칭을 결정한다. (2)운두(雲頭) 꼭지점을 기준으로 운두가 일방향(一方向)으로 배열되었는지 양방향(兩方向)으로 배열되었는지를 확인한다. (3)운두에 연결된 만자꼬리 중 상하꼬리 방향이 좌향인지 우향인지 파악한다. (4)운두를 중심으로 사분면에 배열된 보문 조합이 '1조(組) 보문형'인지 '2조 보문형'인지 확인하고 운두 꼭지점을 기준으로 좌향꼬리는 좌상(左上) 면에서 시계 역방향으로 보문을 판독하고 우향꼬리 운보문은 우상(右上) 면에서 시계 순방향으로 보문을 판독한다. 2조 보문인 경우는 첫 보문의 명칭을 가나다 순으로 따져 '제1조 보문'과 '제2조 보문'을 결정한다. (4)운보문에서 판독한 내용을 유물명부터 유물번호, 소장처, 왕조, 연도, 1-1면, 1-2면, 1-3면, 1-4면, 방향, 2-1면, 2-2면, 2-3면, 2-4면, 운두 크기, 단위문 크기 등 16항목으로 정리한다. 이러한 판독법의 활용을 용이하게 하기 위하여 운보문의 연대 파악을 위한 '정하 운보문 판독법'으로 명명하였다. 넷째, 현종 즉위년(1659)부터 영조 20년(1744)까지 86년간의 의궤 89책 책의에서 28종의 운보문단을 확인하였다. 그리고 운보문에 사용된 보문은 단독보문과 조합보문을 포함하여 45종으로 확인되었는데, 특히 보주(85건), 산호(84건), 서보(42건), 방승(쌍)(41건) 등이 많이 사용되었음을 알 수 있었다. 다섯째, 운보문 판독법을 연대가 정확한 초상화와 출토복식, 전세유물 등에 운보문 판독법을 적용해본 결과, 유물의 연대 파악에 도움이 될 수 있음을 확인하였다.

• 동의생리병리학회지
• /
• 제17권2호
• /
• pp.263-274
• /
• 2003

The present condition of study on the wave-resonance for the bio-KI is observed. And the probroms of reception attendent on the stimulation of wave is observed centering around the sensory organ. The results is as follows: In the wave-resonant stand point, the tendency of studying on KI is showed in the several field all over the world. Because it is originated radionics, the wave-resonant tools of MRA insistenting minute-magnetism-resonance-apparatus need the more severe data in the side of electric circuit. The wave resonance apparatus according to the frequency occurance transmits low-frequency's vibration ratio to the electric stimulating aspect. The wave-water is considered on the application of wave-resonance transcription on the water, and needs the comprehension of torsion-field level. The wave-stimulation of the bio-KI and the reception of the sensory-organ is observed the connection of the sensory-organ and it's corresponding wave. The informations recorded in the wave are distinguished patternly. And the several shaping waves transmit the informations each other through the resonnance. The wave theory is explained the LEE(理) as the wave-pattern and the KI(氣) as the revelation of the patterned-wave in the LEE-KI theory(理氣論), moreover the SHIN(神) as the information of the wave-pattern and the KI as the energy of the wave and the JEUNG(精) as the material of the wave in the JEUNG-KI-SHIN theory(精氣神論). In this point, the study on the wave-resonance of bio-KI is thought that it is significantly in the study method for oriental medicine. The sum of the wave makes the moving body and forms the universe. It means that the several wave patterns gather and form new field. The pattern is a kind of the information and the information is not materially. The information of wave-pattern is the arrangement and the combination of the material source.

• 한국의류산업학회지
• /
• 제24권1호
• /
• pp.1-14
• /
• 2022

K-pop stars are an important influence in the era of digital culture based on emotions. The purpose of this study is to visually express the identity and worldview of their music in the virtual and real world, and to promote Korea's current and past culture. The study also intends to appeal to the emotions of the global fans by designing original textile in their music video 'IDOL' on Tiny TAN - a symbol of world pop star BTS. For design development, traditional Korean images shown in the 'IDOL' video were collected, patterns for each member were selected, and a motif was designed on Adobe Illustrator. We selected the dragon as the motif for V, cloud for Suga, chrysanthemums for Jin, mask for Jung Kook, hanok pavilion for RM, fan for Jimin, and Sam Taegeuk for J-Hope. The selected motifs were designed as per the four textile design arrangement methods: square pattern, 1/2 half drop pattern, turn-around pattern, and panel pattern. The design was presented by mapping Kwaeja to Tiny TAN character. The developed textile design can be used not only for character costumes in virtual space, but also for various products such as clothes, accessories, bedding, cosmetics, stationery, and food. By using it to produce goods inspired by K-pop stars, it can be used as basic data for the development of high value-added competitive products in the global market and create synergy effects of K-Design, which would lead a new trend in the design world.

• 한국유체기계학회 논문집
• /
• 제10권1호
• /
• pp.14-19
• /
• 2007

일반적으로 터보 기계에서 mistuning은 구조적, 기하학적인 면에서의 blade와 blade사이의 미소한 특성의 차이를 의미하며, 이러한 미소한 차이가 강제 진동 시, 발생하는 진동 에너지가 몇 개의 blade 또는 하나의 blade에 집중되어 매우 큰 진동을 야기 시킬 수 있다는 사실이 여러 논문들에 언급되고 있다. 또한 mistuning에 대한 blade 시스템의 강제진동응답의 감도를 줄이기 위하여, intentional mistuning개념을 설계단계에 도입하려고 하는 연구도 진행되고 있다. 따라서 본 논문에서는 두 가지 형태의 blade만을 사용하여 bladed disk의 강제진동응답을 최소화 할 수 있는 intentional mistuning의 pattern 최적화에 미치는 mistuning intensity 영향을 조사하였고 최적화 알고리즘으로 유전알고리즘을 사용하였다.

• 한국조경학회지
• /
• 제38권5호
• /
• pp.113-121
• /
• 2010

노자공이 일본 아스카시대 궁원 남정을 만들었다는 수미산은 인도의 우주관에서는 성산(聖山:Sumeru),중국의 불교적 세계관에서는 묘고산(妙高山)의 형태를 상징화한 것으로 이해되며, 풍륜-수륜-금륜-지륜을 각각 4개의 돌조각에 조각한 조립형 석조물로 추정된다. 노자공의 수미산기록 외에, 일본서기 수미산 등장 4차례의 기록은 수미산이 옥외에 설치된 정원의 구성요소이자 주요 경물로서의 역할을 하였음을 시사하고 있다. 특히, 일본서기 기록의 문구와 그 표현으로 보아 수미산을 중심으로 경물들을 조합하여 활용한 것으로 판단되며, 모두 향연을 위한 특별한 행사시 활용되었던 것으로 보인다. 석신유적에서 발굴된 수미산석이 노자공이 오교와 더불어 만든 수미산인지는 현재 확인할 수 없으나, 이후 궁원의 정원시설물로 되풀이되어 조성된 '수미산형의 석조물'은 노자공이 황궁 남정에 조성한 수미산과 동일한 것이거나, 최소한 노자공이 만든 수미산을 원형으로 그 이후 재차 제작된 것으로 추정되며, 수미산을 기본으로 돌과 연못을 함께 이용하며 원지를 조성했을 것으로 추정된다. 따라서, 노자공이 오교와 함께 만들었다는 수미산은 불교의 수미산의 형상을 최대한 구상화한 형태인 동시에 축경수석이었다고 추정된다. 그리고 수미산의 외형과 기능을 수미산석으로 미루어 추정할 때, 수미산 표면의 문양은 백제시대에 제작된 백제금동대향로나 산수산경문전 그리고 활석제불보살병립상 후면의 문양에서 표현되고 있는 여러 겹으로 겹친 산악 문양 등의 도상과 매우 흡사하였을 것으로 판단된다. 또한, 수미산석의 형태 및 구조를 고려할 때 수미산석 분수시설에 적용된 원리는 수위 차에 따른 압력을 이용하는 사이펀(siphon)의 원리를 적용하여 물을 이동 분출한 것으로 보이며, 향연 등을 목적으로 한 실용수석 차원에서 만들어진 것으로 추정된다.

• 한국국방경영분석학회지
• /
• 제2권1호
• /
• pp.127-143
• /
• 1976

The purpose of this thesis is to study the optimal arrangement of aircraft instrument panels through the human factors approach. Human factors engineering is the process of effectively fitting the human component to the machine component in any man-machine system. The human factors. are especially important to an aircraft pilot who must constantly shift his attention between the instrument panel within the cockpit and the surrounding area of the aircraft. The preliminary part of this study is to find the general patterns of the Korean pilot's eye movements during their various flying maneuvers, and which instruments require the most attention while in flight. It is assumed that all pilots have a general pattern of eye movement when observing the aircraft instrument panel and that an optimum arrangement would be to minimize the eye travel distance between instruments. In this thesis the arrangements of instruments is taken to be the independent variable and the eye travel distance between instruments the dependent variable. la order to compile the information necessary for this study, sixty Korean Air Force pilots were interviewed and requested to complete information forms. These information forms listed various flying maneuvers and listed each instrument used on the instrument panel. The compilation of the information on these completed forms listed the instruments most frequently used by the pilots. The second part of this study was to determine the optimum instrument arrangement. It was necessary to study the various number of possible arrangements of instruments depending upon the number of instruments involved. Therefore, these instruments are grouped by two major functions, The flight instruments were subdivided into three groups, and the engineering instruments were subdivided into six groups. With this subdivision we arrive at the possible number of arrangements of 4,320. Through the simulation method, total eye travel distance for each of these 4,320 arrangements is calculated and the arrangement which appears to be of optimum distance between the most frequently used aircraft instruments is determined. The results of this study indicate that the optimum distance between instruments would be 33,028cm and that the corresponding distance of the instrument panel now being used is 34,288cm. Therefore, an increased efficiency of $3.8\%$ would be realized if the existing aircraft instrument panel were re-arranged according to layout proposed in this thesis.

• 한국지반공학회논문집
• /
• 제39권12호
• /
• pp.75-91
• /
• 2023

GPR을 활용한 지중 매설관로의 비파괴 탐사에 있어서 다중 관로의 경우 관로에 의한 음영영역이 탐사결과에 많은 영향을 미친다. 다중 관로의 음영영역은 관로들의 위치 및 직경에 의해 변화되며 음영영역 내에서는 신호가 전파되지 못하기 때문에 탐지가 불가능하다. 본 연구에서는 FDTD 수치해석을 활용하여 다중 관로의 배치 및 직경에 따라 쌍곡선 형태로 나타나는 관로신호의 특성을 분석하였다. 관로의 배치는 수평, 수직, 대각 배치로 총 3가지 형태에 대한 분석을 수행하였으며, AGC를 활용하여 신호를 증폭하고 각각의 배치형태에서 나타나는 음영영역과 신호 특성의 차이를 분석하였다. 수평 배치에서는 두 관로가 근접할수록 두 쌍곡선 형태 사이에 새로운 쌍곡선 형태가 나타난다. 수직 배치에서는 쌍곡선 좌우 신호가 탐색 가능하여 이를 활용하면 하단 관로를 탐지가능할 것으로 보이나, 상단 관로의 직경이 하단 관로보다 큰 경우에는 탐지가 힘들 것으로 판단된다. 대각 배치의 경우, 지표면의 음영영역의 위치에 따라 다른 특성을 보인다. 장비의 가탐범위 내에 음영영역이 존재하는 경우 신호의 비대칭형태의 신호 특성을 보이며, 음영영역이 가탐범위 외부에 존재하는 경우에는 두 관로의 신호 특성에 영향을 거의 미치지 않는 것으로 나타났다.

• Applied Microscopy
• /
• 제8권1호
• /
• pp.1-8
• /
• 1978

The aim of this research was to discover the action mechanism of various antituberculosis agents (isoniazid, paraaminosalicylic acid and streptomycin) which act on Mycobacteria tuberculosis hominis $H_{37}R_v$ and also to study the relationship of ultrastructural changes and the growth pattern in Mycobacterium tuberculosis hominis. The ultrastructural change was observed with an electron microscope while the growth pattern was studied through in vitro culture. The results are summarized as follows: 1. The ultrastructural changes found in the group treated only with isoniazid were the loss of nuclear materials and the appearence of electron dense granules. 2. In the group treated with paraaminosalicylic acid, thickening of nuclear filaments and meso some arrangement disorders were observed. 3. In the group treated with streptomycin, the ribosome particles appeared indistinct and the cytoplasm was denaturalized. 4. In the group cross treated with all three agents, all the ultrastructural changes mentioned above could be observed in the cell just as they appeared in the single treated groups. 5. In all of the single and in the crossly treated group, there were no significant changes note in the cell wall or cytoplasmic membranes of any of the cells observed. 6. In the cultural data in vitro, through the crossly treated group and single treated group. growth was observed in 3-5 weeks of culture.

• 대한치과기공학회지
• /
• 제24권1호
• /
• pp.107-126
• /
• 2002

The first function of occlusion is mastication. Therefore the functional restoration of occlusal surface is very important. The restoration of occlusal surface is three method as wax bite technique, F.G.P. technique, cone technique. Many dental technician is using compound method. I am using compound method of wax bite technique and cone technique. I have knew common point on each teeth during I have waxing up wax pattern. So I studied on the design waxup technique for mandible molar occlusion. The results of the study were as follows; 1. The dam wax up method can restore axial contour of teeth very easy and make short working time of wax pattern. 2. The height of dam must be same with cusp of adjacent teeth. 3. Automatically the contour of tooth is appeared if the contour of dam is relationship with cuspid line of adjacent teeth. 4. The height of contour of buccal, lingual surface is formed natural curve to add fluid wax by gravitation. 5. The development groove of mandible first premolar is appeared V form. 6. The development groove of mandible second premolar is appeared Y form. 7, The development groove of mandible first molar is appeared M form. 8. The development groove of mandible second molar is W form. 9. The embrasure is formed to carve around contact point area as round convex. It affects to axial form of tooth. 10. The buccal, lingual groove of molar is formed parallel with direction of teeth arrangement.