• Journal of Microbiology and Biotechnology
• /
• v.33 no.4
• /
• pp.419-429
• /
• 2023

Ultraviolet C (UV-C, 200-280 nm) light has germicidal properties that inactivate a wide range of pathogenic and spoilage microorganisms. UV-C has been extensively studied as an alternative to thermal decontamination of fruit juices. Recent studies suggest that the efficacy of UV-C irradiation in reducing microorganisms in fruit juices is greatly dependent on the characteristics of the target microorganisms, juice matrices, and parameters of the UV-C treatment procedure, such as equipment and processing. Based on evidence from recent studies, this review describes how the characteristics of target microorganisms (e.g., type of microorganism/strain, acid adaptation, physiological states, single/composite inoculum, spore, etc.) and fruit juice matrices (e.g., UV absorbance, UV transmittance, turbidity, soluble solid content, pH, color, etc.) affect the efficacy of UV-C. We also discuss the influences on UV-C treatment efficacy of parameters, including UV-C light source, reactor conditions (e.g., continuous/batch, size, thickness, volume, diameter, outer case, configuration/arrangement), pumping/flow system conditions (e.g., sample flow rate and pattern, sample residence time, number of cycles), homogenization conditions (e.g., continuous flow/recirculation, stirring, mixing), and cleaning capability of the reactor. The collective facts indicate the immense potential of UV-C irradiation in the fruit juice industry. Existing drawbacks need to be addressed in future studies before the technique is applicable at the industrial scale.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.13 no.5
• /
• pp.8-14
• /
• 2014

A slewing reducer consists of two planetary gearsets which require a good load distribution over the gear tooth flank for enhanced durability. This work investigates how the bearing characteristics influence the load distribution over the gear tooth flank. A complete system model is developed to analyze a slewing reducer, including the non-linear mesh stiffness of the gears and the non-linear stiffness of bearings. The results indicate that the type, arrangement and preload of the output shaft bearings greatly influence the gear mesh misalignment, contact pattern, face load factor, gear safety factor and lifetimes of the parts.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2003.11a
• /
• pp.676-683
• /
• 2003

A laboratory experiment using artificial fracture rocks was used to understand the 3-dimensional dispersion of a tracer and the mixing process in a fractured network. In this experiment, 12cm polystyrene foam cubes with two electrodes for monitoring electric conductivity (EC) were used as artificial fractured rocks. Distilled water with 0.5mS/m was used as a tracer in water with 35mS/m and the difference of EC between the tracer and the water was monitored by a multipoint simultaneous measurement system of electrical resistance. The results showed that even if the fracture arrangement pattern was not straight in the direction of the flow, the tracer did not diffuse along individual fractures and an oval tracer plume, which was the distribution of tracer concentrations, tended to be form in the direction of the flow. The vertical cross section of the tracer distribution showed small diffusivity in the vertical direction. The calculated total tracer volume passing through each measurement point in the horizontal cross section showed while that the solute passed through measurement points near the direction of hydraulic gradient and in other directions, the passed tracer volumes were small. Using Peclet number as a criterion, it was found that the mass distribution at the fracture intersection was controlled in the stage of transition between the complete mixing model and the streamline routing model.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.4C no.1
• /
• pp.26-30
• /
• 2004

Orientation control of a polyoxometalate (POM) nanoparticle in its two-dimensional arrangement was attempted by Langmuir-Blodgett (LB) technique. For their uniorientation, two carboxyl groups were introduced on one side of the POM particle, and hydrophobic long chains were attached by esterification with the carboxyl groups (C18-POM). The C18-POM layer spread on water surface showed stability against surface pressure up to 60 mN/m. The pattern of the C18-POM isotherm was quite different from stearyl alcohol (C18-OH), while the POM itself did not show any development of surface pressure on water surface. The AFM images of C18-POM LB films showed some microcrystalline structures that were noticed as dot structures by Brewster angle microscopy. The microimages for C18-POM did not completely spread out as a monolayer on the water surface. The XPS spectra indicated the presence of POM structures and stearyl ester bonds formed from about 65% of the total carboxyls. The XRD spectra showed that the unioriented POMs were not positioned with the same lattice distance but rather in a wavy surface state.

• Animal Systematics, Evolution and Diversity
• /
• v.32 no.1
• /
• pp.49-54
• /
• 2016

Korean nannastacids have recorded only eight species belonging to genera Campylaspis and Cumella. In this paper, Nannastacus nyctagineus Gamȏ, 1962, is redescribed and illustrated as a new species of Korean fauna in this study for the first time. Korean female specimens of Nannastacus nyctagineus correspond well with the original description by Gamȏ, 1962 based on only female specimens. Gamȏ has described that new species, Nannastacus pruinosus could be distinguished from N. nyctagineus based on only male specimens. The Korean male specimens of N. nyctagineus undoubtedly match well with the description of N. pruinosus with the following common features: the surface of the carapace is covered with numerous granules; pereonites and pleonites have similar patterns of the teeth on dorsal surface; the proportion and armature of the dactylus of pereopod 2 is similar; the number and pattern arrangement of the setae on the surface in antenna 1, pereopod 1, and uropod are the all most same. Nannastacus pruinosus Gamȏ, 1962 is proposed as a synonym of N. nyctagineus described in this study. This represents the first record on the genus Nannastacus from Korea.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.10 no.1
• /
• pp.9-14
• /
• 1980

The author studied on the effects of X-ray irradiation to the development of periodontal ligament in gestation rats. They were irradiated in their abdomen with 100, 200 and 300 rads respectively in one shot irradiation with deep radiation therapy equipment (MAXIMAR 250-Ⅲ), In 7th, 14th, 21th and 28th day after delivery, those new born rats were respectively sacrificed with ether anesthesia and removed of their mandibles. After removal, those mandibles were fixed in 10% neutral buffer formalin, decalcified with 5% trichloroacetic acid for 5 days and embedded with paraffine. Staining was performed with H-E, Van Gieson, Mallory azan, Bielshowsky-Gomori silver stain and Halmi's oxytalan fiber stain. The results were as follows: 1. Before tooth eruption, all the fiber: components in dental sac were almost always oriented near the outer enamel epithelial \layer. But in irradiated new born rats, those collagen fiber orientation was more irregular than those of control groups, and this phenomenon was more severe in proportion to the amount of irradiation in the gestation period. 2. Before tooth eruption, the connective tissue fibers in periodontal ligament were stained with lighter in the irradiated groups than those of control groups. Oxytalan fibers of irradiated groups were thin and splitting pattern of their fiber morphology to compare with those of control groups. 3. After tooth eruption, the periodontal ligament fibers of irradiated groups were oriented functionally and their morphology was thick, fine and heavy staining. Oxytalan fibers were revealed with oblique parallel arrangement in the periodontal ligament of irradiated groups.

• Journal of Ginseng Research
• /
• v.9 no.2
• /
• pp.256-263
• /
• 1985

In order to investigate the inferior factor of red ginseng quality, the contents of various chemical components, physico-chemical properties and arrangement state of ginseng cells were observed. Contents of total reducing sugar, reducing sugar, crude protein, crude fibre and specific gravity of inside white part of red ginseng were less than those of normal part. But differences in content of crude saponin, HPLC pattern of ginsenosides and reducing ability for DP P H(1,1-dipheny 1-2-picrylhydrazyl) between normal and inside white part of red ginseng were not found. The optical density of 1 water extract of normal part of red ginseng did not differ from that of inside white 1 part of red ginseng, but the visible and UV absorbance of acid hydrolyzate of normal red ginseng showed higher than those of inside white part of red ginseng. The differences in the internal color and tissue of normal and inside white part of red ginseng were easily found with naked eye, and by the microscopic fractography, the orangement state of ginseng cell in the inside white part of red ginseng was less dense than that in normal red ginseng.

• Proceedings of the IEEK Conference
• /
• 2002.07b
• /
• pp.719-722
• /
• 2002

This paper reports the characteristics of a bidirectional antenna by using a planar array of a probe excited circular ring. The element of a bidirectional antenna is first designed to achieve the maximum directivity. The directivity can be further increased by arranging these elements to form the linear array. There are two types of linear array to be investigated i.e., on axis and off axis arrangement. On-axis linear array yields better directivity than off-axis linear array. Therefore, this orientation is further used to form the planar array. The radiation characteristics of this optimum planar array are rigorously reported. The proposed structure is very useful to extend the distance between the base station in PCT system.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.25 no.1
• /
• pp.71-77
• /
• 2001

A flow visualization study using the oil film method and the smoke-laser light sheet arrangement is carried out to investigate the three-dimensional flow pattern around the free end surface region of a finite circular cylinder (aspect ratios of 1.25 and 4.25) mounted on a flat plate. The experiment is performed for the cases of two Reynolds numbers: 5.92${\times}$10$^3$and 1.48${\times}$10(sup)5. Various kinds of singular points on the free-end surface are disclosed from the oil surface flow visualization. The smoke-laser light sheet visualization, to aid in understanding the oil streak-line patterns, clearly demonstrates that a pair of tornado-like vortices marched along the downstream together with a pair of side tip vortices. A topological sketch to characterize the surface flow and the four vortices emanating from the top surface is included.

• Journal of Welding and Joining
• /
• v.20 no.5
• /
• pp.93-98
• /
• 2002

The effect of bonding misfit on single crystallization of transient liquid phase (TLP) bonded joints of single crystal superalloy CMSX-2 was investigated using MBF-80 insert metal. The bonding misfit was defined by (100) twist angle (rotating angle) at bonded interface. TLP bonding of specimens was carried out at 1523K for 1.8ks in vacuum. The post-bond heat treatment consisted of the solution and sequential two step aging treatment was conducted in the Ar atmosphere. The crystallographic orientation analysis across the TLP bonded joints was conducted three dimensionally using the electron back scattering pattern (EBSP) method. EBSP analyses f3r the bonded and post bonded heat treated specimens were conducted. All bonded joints had misorientation centering around the bonded interface for as-bonded and post-bond heat treated specimens with rotating angle. The average misorientation angle between both solid phases in bonded interlayer was almost identical to the rotating angle at bonded interface. HRTEM observation revealed that the atom arrangement of both solid phases in bonded interlayer was quite different across the bonded interface. It followed that grain boundary was formed in bonded interface. It was confirmed that epitaxial growth of the solid phase occurred from the base metal substrates during TLP bonding and single crystallization could not be achieved in joints with rotating angle.