• 한국전산유체공학회지
• /
• 제12권4호
• /
• pp.61-67
• /
• 2007

Numerical simulation of laminar flow over two spheres in a side-by-side arrangement is carried out to investigate the effect of the inter-sphere spacing on the flow characteristics. The Reynolds numbers considered are 100, 250, and 300, covering the steady axisymmetric, steady planar-symmetric, and unsteady planar-symmetric flows in the case of a single sphere. Results show that the drag and lift coefficients and wake structures are significantly modified depending on both the Reynolds number and the spacing between the spheres. At Re=100, the flow is steady planar-symmetric irrespective of the spacing, but it shows some variation according to the spacing at Re=250 and 300. That is, the flow maintains planar symmetry of the single-sphere wake at large spacings, while it loses the symmetry at small spacings due to the generation of new asymmetric vortical structures. It is also shown that the drag and lift coefficients generally increase with decreasing inter-sphere spacing because the high pressure region is formed near the gap between the spheres.

• 대한기계학회논문집B
• /
• 제27권7호
• /
• pp.901-908
• /
• 2003

Numerical study on stirring characteristics in a microchannel with blocks arranged periodically has been performed. Viscous flows through the microchannel is simulated three-dimensionally using a commercial code, FLUENT 6.0. Focus is given to the effect on the stirring characteristics of the geometric factors including the pitch, height and angle of the block arrangement. The numerical results at low Reynolds numbers show that the particles' trajectories in the microchannel heavily depend on the block arrangement. A nonlinear dynamical tool, i.e. Lyapunov exponent, was used in analysing the mixing effect. It was found that the mixing is the most effective at a certain combination of parameter values.

• 대한방사선기술학회지:방사선기술과학
• /
• 제47권4호
• /
• pp.271-278
• /
• 2024

This study aimed to evaluate the impact of changes in beam arrangement and arc counts on dosimetric factors in volumetric modulated arc therapy (VMAT) inverse radiation therapy planning for hippocampal-avoidance whole brain radiation therapy (HA-WBRT) by using the Elekta Monaco radiation therapy planning system (RTPs). For coplanar VMAT, both the arc per beam (APB) method and the beam determined arc(BDA) method, which is determined by the number of beams, were applied. For non-coplanar VMAT, the BDA method was utilized, and a total of 9 treatment plans were established by varying the arc counts. All radiation therapy plans met the radiation oncology group (RTOG) 0933 protocol standards, and 14 dosimetric factors were compared and analyzed. The results showed that the BDA-NC VMAT method demonstrated superior performance in terms of planning target volume (PTV) coverage and protection of normal organs, while APB-VMAT was advantageous in terms of hippocampal protection, monitor unit and delivery time. This study is expected to contribute to the efficient establishment of HA-WBRT plans considering the changes in beam arrangement and rotation arc numbers in Monaco RTPs.

• Journal of Advanced Marine Engineering and Technology
• /
• 제33권1호
• /
• pp.44-51
• /
• 2009

The Characteristics of the flowfield through tube banks with in-line and staggered arrangements were investigated by PIV. Strouhal numbers, velocity vectors and velocity profiles around the cylinders with in-line and staggered arrangements were observed at the pitch ratio Pt/D=2.0 and Reynolds number of Re=$Re=4.0{\times}10^3$. As the results The flow patterns through tube banks were almost a straight line in case of the in-line arrangement while it was almost 八 type in case of the staggered arrangement in the direction of the wake. The average velocity in the rear region of the tube banks with the staggered arrangement was far smaller than that with the in-line arrangement. The Strouhal number in the last rank was far smaller than that in the front ranks in both of the in-line and staggered arrangements. The wake of each cylinder changed with time and with the position of the cylinder.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.2530-2535
• /
• 2008

The Visualizations of the flowfield through tube banks with in-line and staggered arrangements were investigated by PIV. Strouhal numbers, velocity vectors and velocity profiles around the cylinders with in-line and staggered arrangements were observed at the pitch ratio $P_t/D=2.0$ and Reynolds number of $Re=4.0{\times}10^3$. As the results The flow patterns through tube banks were almost a straight line in case of the in-line arrangement while it was almost 八 type in case of the staggered arrangement in the direction of the wake. The average velocity in the rear region of the tube banks with the staggered arrangement was far smaller than that with the in-line arrangement. The Strouhal number in the last rank was far smaller than that in the front ranks in both of the in-line and staggered arrangements. The wake of each cylinder changed with time and with the position of the cylinder.

• Journal of Advanced Marine Engineering and Technology
• /
• 제31권2호
• /
• pp.159-165
• /
• 2007

The Characteristics of the flowfield around two circular cylinders in tandem arrangement was investigated by PIV. Strouhal numbers. velocity vectors and velocity profiles were observed at centre-to-centre space ratios of P/D= 1.5. 2.0 and 2.5, and Reynolds number of $Re=3.0{\times}10^3{\sim}5.0{\times}10^3$. As the results the Strouhal numbers measured in the rear region of the cylinder of wake side were decreased with the space ratios. The flow between two cylinders was almost stagnated and the size of the stagnated region was larger in the close side than in the far side of the front cylinder. The direction of vortex between two cylinders was opposed each other with the small difference(${\alpha}\;{\pm}1.0^{\circ}$) of the attack angle ${\alpha}$.

• Steel and Composite Structures
• /
• 제52권4호
• /
• pp.391-403
• /
• 2024

The flexural behavior of composite sandwich wall panels with different thicknesses, numbers of holes, and hole forms, and arrangement form of longitudinal steel bar (uniform type and concealed-beam type) are investigated. A total of twelve composite sandwich wall panels are prepared, utilizing modified polystyrene particles mixed with foam concrete for the flexural performance test. The failure pattern of the composite sandwich wall panels is influenced by the extruded polystyrene panel (XPS) panel thickness and the reinforcement ratio in combination, resulting in both flexural and shear failure modes. Increasing the XPS panel thickness causes the specimens to transition from flexural failure to shear failure. An increase in the reinforcement ratio leads to the transition from flexural failure to shear failure. The hole form on the XPS panel and the steel bar arrangement form affect the loading behavior of the specimens. Plum-arrangement hole form specimens exhibit lower steel bar strain and deflection compared to linear-arrangement hole form specimens. Additionally, specimens with concealed beam-type steel bar display lower steel bar strain and deflection than uniform-type steel bar specimens. However, the hole form and steel bar arrangement form have a limited impact on the ultimate load. Theoretical formulas for cracking load are provided for both fully composite and non-composite states. When compared to the experimental values, it is observed that the cracking load of the specimens with XPS panels closely matches the calculations for the non-composite state. An accurate prediction model for the ultimate load of fully composite wall panels is developed. These findings offer valuable insights into the behavior of composite sandwich wall panels and provide a basis for predicting their performance under various design factors and conditions.

• Journal of Audiology & Otology
• /
• 제23권1호
• /
• pp.27-32
• /
• 2019

Background and Objectives: Detection of auditory signals may be improved when maskers far from the frequency of the target signal are coherently amplitude-modulated. This improvement of signal detection is called comodulation masking release (CMR). In the CMR experiments, flankers have been usually arranged symmetrically. In practice, we will be confronted with a problem by using symmetric flankers due to the limited output of clinical audiometers, especially at high-frequency. We aimed to check whether flanker arrangement has any effect on the amount of CMR, especially when there is no flankers with a frequency higher than the signal. Subjects and Methods: Eighteen normal hearing listeners ranging in age from 20 to 46 years old participated. Symmetric (2-2) and asymmetric (3-1 and 4-0) flankers were used and then the amount of CMR compared among them. Results: Our results showed in the same numbers of flankers, there were no statistically CMR differences between symmetric and asymmetric arrangement. Also when we did not have a flanker at a frequency higher than the signal and all flankers were placed below the signal, there was no statistically difference with the symmetric arrangement. Conclusions: The asymmetry of the flankers and also omitting the flankers with a frequency higher than the signal, have no effect on CMR results. We concluded that CMR can be considered by using clinical audiometer.

• 대한청각학회지
• /
• 제23권1호
• /
• pp.27-32
• /
• 2019

Background and Objectives: Detection of auditory signals may be improved when maskers far from the frequency of the target signal are coherently amplitude-modulated. This improvement of signal detection is called comodulation masking release (CMR). In the CMR experiments, flankers have been usually arranged symmetrically. In practice, we will be confronted with a problem by using symmetric flankers due to the limited output of clinical audiometers, especially at high-frequency. We aimed to check whether flanker arrangement has any effect on the amount of CMR, especially when there is no flankers with a frequency higher than the signal. Subjects and Methods: Eighteen normal hearing listeners ranging in age from 20 to 46 years old participated. Symmetric (2-2) and asymmetric (3-1 and 4-0) flankers were used and then the amount of CMR compared among them. Results: Our results showed in the same numbers of flankers, there were no statistically CMR differences between symmetric and asymmetric arrangement. Also when we did not have a flanker at a frequency higher than the signal and all flankers were placed below the signal, there was no statistically difference with the symmetric arrangement. Conclusions: The asymmetry of the flankers and also omitting the flankers with a frequency higher than the signal, have no effect on CMR results. We concluded that CMR can be considered by using clinical audiometer.

• 대한기계학회논문집B
• /
• 제27권7호
• /
• pp.909-919
• /
• 2003

Two-dimensional flow over a pair of circular cylinders in a side-by-side arrangement at low Reynolds numbers has been numerically investigated in this study Numerical simulations are performed, using the immersed boundary method, for the ranges of 40$\leq$Re$\leq$160 and $g^{*}$＜5, where Re and $g^{*}$ are, respectively, the Reynolds number and the spacing between the two cylinder surfaces divided by the cylinder diameter. Results show that a total of six kinds of wake patterns are observed over the ranges: antiphase-synchronized, inphase-synchronized, flip-flopping, single bluff-body, deflected, and steady wake patterns. It is found that the characteristics of the flow significantly depends both on the Reynolds number and gap spacing, with the latter much stronger than the former. Instantaneous flow fields, time traces, flow statistics and so on are presented to identify the wake patterns and then to understand the underlying mechanism. Moreover, the bifurcation phenomenon where either of two wake patterns can occur is found at certain flow conditions.ons.