• Journal of the Korea institute for structural maintenance and inspection
• /
• 제25권5호
• /
• pp.24-31
• /
• 2021

The soundproof tunnels have been generally designed with H-beam girders, and the high weight of H-beam may cause the excessive design of the substructure. To solve this problem, this paper proposes a new soundproof tunnel girder design composed of pipes and discontinuous plates. First, the structural behavior of the straight girder according to the design parameters was examined through finite element analysis. The arrangement and shape of the plates were determined as the design parameter, to obtain the optimal design of girder. After then, the structural behavior and buckling stability of the arched girder were subsequently evaluated. As a result of the parameter analysis, it was confirmed that the axial force acting on the girder increased and the moment decreased as the ratio of unsupported sections decreased or the number of supporting plates increased. The stress concentration on the pipe member was relieved by increasing the long axis length of the elliptical plate. Arched girder analysis showed that the structural efficiency increase as the long axis of elliptical plate increase. As a result of the buckling evaluation, the buckling threshold load of the three connected girders was about 3.7 times higher than the design load. Consequently, it was confirmed that the proposed soundproof tunnel structure design satisfies both light weight and structural safety.

• Journal of Food Hygiene and Safety
• /
• 제28권1호
• /
• pp.7-12
• /
• 2013

This study presents the influence on growth properties determined using a novel predictive growth model of wild-type Salmonella spp. KSC 101 by variations in the temperature and time during cut packaging in cold, uncooked pork meat. The experiment performed for model development included an arrangement of different temperatures ($0^{\circ}C$, $5^{\circ}C$, $10^{\circ}C$, $15^{\circ}C$, and $20^{\circ}C$) and time durations (0, 1, 2, and 3 hours) that reflect actual pork-cut and packaging processes. No growth was observed at $0^{\circ}C$ and $5^{\circ}C$, whereas some growth was observed at $10^{\circ}C$, $15^{\circ}C$, and $20^{\circ}C$, with a mean increase of only 0.34 log CFU/g. The growth observed at $20^{\circ}C$ was more robust than that observed at $15^{\circ}C$, but the difference was not statistically significant (p > 0.05). However, compared with PMP (Pathogen Modeling Program), the wild-type Salmonella spp. KSC 101 showed a more rapid growth. We used the Gompertz 4 parameter equation as the primary model, and the exponential decay formula as the secondary model. The estimated $R^2$ values were 0.99 or higher. The developed model was evaluated by comparison of the experimental and predictive values, and the values were in agreement with the ${\pm}0.5$ log CFU/g, although the RMSE (Root mean square error) value was 0.103, which indicates a slight overestimation. Therefore, we suggest that the developed predictive growth model would be useful as a tool for evaluating sanitation criteria in pork cut-packaging processes.

• Radiation Oncology Journal
• /
• 제23권1호
• /
• pp.22-31
• /
• 2005

Purpose : To conduct a nationwide survey on the principals in radiotherapy for rectal cancer, and produce a database of Korean Patterns of Care Study. Materials and Methods : We developed web-based Patterns of Care Study system and a national survey was conducted using random sampling based on power allocation methods. Eligible patients were who had postoperative radiotherapy for rectal cancer without gross residual tumor after surgical resection and without previous history of other cancer and radiotherapy to pelvis. Data of patients were Inputted to the web based PCS system by each investigators in 19 institutions. Results : Informations on 309 patients with rectal cancer who received radiotherapy between 1998 and 1999 were collected. Male to female ratio was 59 : 41, and the most common location of tumor was lower rectum ($46\%$). Preoperative CEA was checked in $79\%$ of cases and its value was higher than 6 ng/ml in $32\%$. Pathologic stage were I in $1.5\%$, II in $32\%$, III in $53\%$, and IV in $1.6\%$. Low anterior resection was the most common type of surgery and complete resection was peformed in $95\%$ of cases. Distal resection margin was less than 2 cm in $30\%$, and number of lymph node dissected was less than 12 in $31\%$. Chemotherapy was peformed in $91\%$ and most common regimen was 5-FU and leucovorine ($59\%$). The most common type of field arrangement used for the initial pelvic field was the four field box (Posterior-Right-Left) technique ($65.0\%$), and there was no AP-PA parallel opposing field used. Patient position was prone in $81.2\%$, and the boost field was used in $61.8\%$. To displace bowel outward, pressure modulating devices or bladder filling was used in $40.1\%$. Radiation dose was prescribed to isocenter in $45.3\%$ and to isodose line in 123 cases ($39.8\%$). Percent delivered dose over $90\%$ was achieved in $92.9\%$. Conclusion : We could find the Patterns of Care for the radiotherapy in Korean rectal cancer patients was similar to that of US national survey. The type of surgery and the regimen of chemotherapy were variable according to institutions and the variations of radiation dose and field arrangement were within acceptable range.

• Parasites, Hosts and Diseases
• /
• 제22권1호
• /
• pp.1-10
• /
• 1984

This study was performed to observe the chronological changes in the tegumental structure of M. yokogawai using scanning electron microscope. The subjected worms were encysted metacercariae obtained from the sweetish, and 2-day, 1-week and 4-week old worms experimentally reared in albino rats. The results are as follows: 1. The tegument of encysted metacercariae showed many transverse shallow rugae, which were more remarkable in posterior half body, i.e., posterior to ventral sucker. The whole surface was armed with many scale-like spines; 7~8 pointed ones on anterior body and 2~3 pointed on posterior body. The ciliated knob-like papillae (Type I) were abundant around oral and ventral suckers, which grouped 2, 3 or 4 in number in most cases. A few round swellings of tegument(Type lI were observed only on oral sucker. 2. The tegumental surface of 2-day old worms showed deeper rugae, and the anterior half covered with knob-like processes of distal cytoplasm and the posterior half with cobblestone-like ones. Interspinous space became more wide and 9 pointed spines appeared on anterior dorsal surface. The sensory papillae enlarged but not changed in their distribution. 3. The tegument of 1-week old worms revealed knob-like cytoplasmic processes in posterior half body and velvety ones around oral sucker. The scale-like spines of anterior half body changed remarkably to the slender ones of posterior body at the level of ventral sucker. In dorsal surface, the arrangement of the Type I papillae were bilaterally symmetrical. 4. The tegument of 4-week old worms were finely differentiated and the posterior tegument covered with velvety cytoplasmic processes. The spines had remarkably grown in length and width but the density remained nearly unchanged. The papillae also became larger but their morphology and distribution were not different from younger worms. However, the round elevation of cytoplasmic ridges (Type III papilla) appeared bilaterally on inner wall of oral sucker, approximately 8 in number. From the above results, it is considered that the tegument of juvenile iH. yokogawai continued to differentiate until 4 weeks after infection.

• Journal of Korean Society of Forest Science
• /
• 제64권1호
• /
• pp.52-63
• /
• 1984

This study was intended to identify 17 taxa. (5 varieties and 12 species) of the genus Acer in Korea on the basis of the shapes of stomata, the type of trichome on the different part of leaves, the shapes, arrangement and number of stele in cross section of petiole. The results obtained were summarized as follows; 11 The shape of guard cells of stomata in the genus Acer was anomcytical, and the size of the cells ranged from 10.25 to $21.00{\mu}$ in length and from 7.57 to $11.83{\mu}$ in width. 2) Eleven types of trichome on the leaf in the genus Acer were found; pilose, sericeous, velutinous, woolly, glabrate, puberulent, bladder hair, hispid, hirsute and uncinate. This characteristics also established a good criterion for identification of species. 3) The stele of petiole in the genus Acer was characterized by eustele and atactostele with polybranch, and the six groups of the shape of numerical change of stele; B>M=T, BM

• Korean Journal of Hospice Care
• /
• 제3권2호
• /
• pp.34-54
• /
• 2003

Every one experiences death one day, however no one can knows exactly what it is because people can not experience death until it comes, it is therefore impossible to judge correctly on the phenomenon of the death. On the whole, man experiences indirect death through the mass communications such as TV drama, fiction, magazine etc because those methods can easily access by every one. In addition to this, people usually acquire the negative awareness of death through the dramatic change of story like dying of cancer for dramatic effect by giving scare and fear to the cancers. The purpose of this study is to provide basic information on the spiritual care that enables the facing death patients to accept death as a part of life and divert hope from scare about after death by comparing and analyzing of two aspects of death meaning I.e, Korean fiction and the end stage cancer patients. Additionally, for medical staff to understand the facing death cancer patients by making to aware patients correctly and provide the better quality of care. The study was performed from September 28, 2002 to February, 28 2003. The materials of this study were collected by direct data obtained from observation, interviews, note and diary of end stage of cancer patients and written materials acquired from Korean contemporary fiction. Participants of this study were 4 end stage cancer patients including 2 lung cancer patients, 1 liver cancer patient and 1 esophagus cancer patient. The methodology used in this study was divided into two types; Huberman & Miles methodology was used for fiction to find and categorize subject, and Colaizzi, one of phenomenological methodology was used for end stage cancer patients to find the major meaning, subject and categorization. 1.The death investigated in the fiction, was found as a progress of negative emotion, acceptance and sublimation, life related subjects in the negative emotion were tenacity for life, anxiety, lingering attachment, responsibility, abandonment and death related subjects were shock, isolation, fear, scare and rejection. Acceptance related subjects were acceptance, destiny, secularism, preparation and arrangement, and sublimation related subjects were sublimation through Christian and Buddhism. 2.The death showed in the participants was negative emotion, acceptance and sublimation, life related subjects were repentance, anxiety, responsibility and hopelessness, and death related subjects were dejection, solitude, anger, fear and scare. The acceptance was a type of religious acceptance that admitted instantly by reaching an understanding with the God, and death was accepted as a progress of preparation, arrangement, acceptance and hope. Sublimation related subjects were Christian sublimation and relief or destiny incurred from self-reflective sublimation through communications and thoughts. 3.The death in view of fiction and participants were positively accepted both death and negative emotion, and the study disclosed the fact that death was sublimated dependent on religion. 4.The progress of negative emotion, acceptance and sublimation was disclosed more complicated and various in the real end stage cancer patients and acceptance only found in the patients on the form of religious acceptance, according to the results compared with fiction and real end stage cancer patients. The death showed in the fiction was standardized, gradated and similar progress with psychological status of Kubler-Ross. However, death in the participants was showed complex and various feelings simultaneously, and sometimes they accepted death positively. The sublimation through religion was found in Buddhism and Christian in the fiction and mostly Christian in the participants due to a number of Hospice patients. It was found that negative emotion various types of death was more found in the participants than fiction. It is therefore necessary to study on the response of death in various types. In the participants death was incurred more systematic and variously, we knew that nursing practice focused on experience of participants is required and reality on death is much profound than we analyzed and presented, lots of situations and reactions should be premised because we can not completely rule out the negligence possibility of care mediation of participants. In caring for the facing death patients, we discovered and confirmed again through this study that the spiritual care should be needed as a mediation method.

• Journal of the Korean Institute of Navigation
• /
• 제13권1호
• /
• pp.21-53
• /
• 1989

In the past twenty years, there has been a rapid increase in the volume of traffic in Korea due to the Korean great growth of the Korean economy. Since transformation provides an infrastructure vital to economic growth, it becomes more and more an integral part of the Korea economy. The importance of coastal shipping stands out in particular, not only because of the expansion limit on the road network, but also because of saturation in the capacity of rail transportation. In spite of this increase and its importance, coastal shipping is falling behind partly because it is givenless emphasis than ocean-going shipping and other inland transportation systems and partly because of overcompetition due to excessive ship tonnage. Therefore, estimating and planning optimum ship tonnage is the first take to develop Korean coastal shipping. This paper aims to estimate the optimum coastal ship tonnage by computer simulation and finally to draw up plans for the ship tonnage balance according to supply and demand. The estimation of the optimum ship tonnage is peformed by the method of Origin -Destimation and time series analysis. The result are as follows : (1) The optimum ship tonnage in 1987 was 358, 680 DWT, which is 54% of the current ship tonnage (481 ships, 662, 664DWT) that is equal to the optimum ship tonnage in 1998. this overcapacity result is in excessive competition and financial difficulties in Korea coastal shipping. (2) The excessive ship tonnage can be broken down into ship types as follows : oil carrier 250, 926 DWT(350%), cement carrier 9, 977 DWT(119%), iron material/machinery carrier 25, 665 DWT(117%), general cargo carrier 17, 416DWT(112%). (3) the current total ship crew of 5, 079 is more than the verified optimally efficient figure of 3, 808 by 1271. (4) From the viewpoint of management strategy, it is necessary that excessive ship tonnage be reduced and uneconomic outdated vessels be broken up. And its found that the diversion into economically efficient fleets is urgently required in order to meet increasing annual rate in the amounts of cargo(23, 877DWT). (5) The plans for the ship tonnage balance according to supply and demand are as follows 1) The establishment of a legislative system for the arrangement of ship tonnage. This would involve; (a) The announcement of an optimum tonnage which guides the licensing of cargo vessels and ship tonnage supply. (b) The establishment of an organization that substantially arrangement tonnage in Korea coastal shipping. 2) The announcement of an optimum ship tonnage both per year and short-term that guides current tonnage supply plans. 3) The settlement of elastic tariffs resulting in the protect6ion of coastal shipping's share from other tonnage supply plans. 4) The settlement of elastic tariffs resulting in the protection of coastal shipping's share from other transportation systems. 4) Restriction of ocean-going vessels from participating in coastal shipping routes. 5) Business rationalization of coastal shipping company which reduces uneconomic outdated vessels and boosts the national economy. If we are to achieve these ends, the followings are prerequisites; I) Because many non-licensed vessels are actually operating and threatening the safe voyage of the others in Korea coastal routes, it is necessary that those ind of vessels be controlled and punished by the authorities. II) The supply of ship tonnage in Korean coastal routes should be predently monitored because most of the coastal vessels are to small to be diverted into ocean-going routes in case of excessive supply. III) Every ship type which is engaged in coastal shipping should be specialized according to the characteristics of its routes as soon possible.

• Bulletin of the Society of Naval Architects of Korea
• /
• 제27권3호
• /
• pp.131-136
• /
• 1990

여러해 전부터 선박의 생산실적이나 생산성 관련 자료를 기록하고 보완하는 작업을 꾸준히 개선토록 노력해온 결과중 중요한 것 하나는, 선박의 여러 가지 설계 검토과정에서 충분히 활용할 수 있는 함축성 있고 믿을만한 형태의 생산정보를 제공해줄 수 있게 되었다는 것이라고 말 할 수 있겠다. 이러한 자료들은 생산계획상 각 단계(stage)에서의 작업량, 예상재료비와 인건비의 산출등이 포함될 수 있으며, 선박이나 해상구조물의 전반적인 설계방법론(design methodology)을 개선코자 한다면 ''생산지향적 설계(Design for Production)''의 근간이 되는 선박건조전략(build strategy), 구매정책(purchasing policy)과 생산기술(production technology)에 대한 폭넓은 지식이 한데 어우러져야 한다. 최근에는 CIMS의 일부분에서 보는 바와 같은 경영관리, 설계 및 생산지원 시스템의 도입으로 이와 같은 설계 프로세스의 추진을 가능케하고 있다. 이와 병행하여 설계를 지원하기 위한 전산기술, 특히 대화형 화상처리기술(interactive graphics)의 발달은 설계자가 선박의 형상이나 구조 배치를 여러 가지로 변화시켜 가면서 눈으로 즉시 확인할 수 있도록 설계자의 능력을 배가시키는데 크게 기여하고 있다. 여러 가지의 설계안(alternative design arrangement)을 신속히 만들어내고 이를 즉시 검토 평가할 수 있는 능력을 초기설계 단계에서 가질 수 있다면 이는 분명히 큰 장점일 것이며, 더구나 설계초기 단계에 생산관련인자를 설계에서 고려할 수 있다면 이는 더욱 두드러진 발전일 것이다. 생산공법과 관련생산 비용을 정확히 반영한 각 가지의 설계안을 짧은 시간내에 검토하고 생산소요 비용을 산출하여 비교함으로써, 수주계약단계에서 실제적인 생산공법과 신뢰성있는 생산실적자료를 기준으로 하여 총 건조비(total production cost)를 최소로 하는 최적의 설계를 선택할 수 있도록 해 줄 것이다. 이제 이와 같은 새로운 설계도구(design tool)를 제공해 주므로써 초기설계에 각종 생산관련 정보나 지식 및 실적자료가 반영가능토록 발전되었다. 본 논문은 영국의 뉴카슬대학교(Univ. of Newcastle upon Type)에서 위에 언급한 특징들을 반영하여 새로운 선박구조 설계 방법을 개발한 연구결과를 보여주고 있다. 본 선계연구는 5단계로 구분되는데; (1) 컴퓨터 그라픽스를 이용하고 생산정보 데이타베이스와 연결시켜 구조형상(geometry)을 정의하고 구조부재 칫수(scantling) 계산/결정 (2) 블럭 분할(block division) 및 강재 배치(panel arrangement)의 확정을 위해 생산기술 및 건조방식에 대한 정보 제공 (3) 상기 (1) 및 (2)를 활용하여 아래 각 생산 단계에서의 생산작업 분석(work content assessment) a) 생산 준비 단계(Preparation) b) 가공 조립 단계(Fabrication/Assembly) c) 탑재 단계(Erection) (4) 각각의 설계(안)에 대하여 재료비(material cost), 인건비(labour cost) 및 오버헤드 비용(overhead cost)을 산출키 위한 조선소의 생산시설 및 각종 품셈 정보 (5) 총 건조 비용(total production cost)을 산출하여 각각의 설계안을 비교 검토. 본 설계 방식을 산적화물선(Bulk Carrier) 설계에 적용하여 구조배치(structural geometry), 표준화의 정도(levels of standardisation), 구조생산공법(structural topology) 등의 변화에 따른 설계 결과의 민감도를 분석(sensitivity studies)하였다. 전산장비는 설계자의 대화형 접근을 용이하도록 하기 위해 VAX의 화상 처리장치를 이용하여 각 설계안에 대한 구조형상과 작업분석, 건조비 현황 등을 제시할 수 있도록 하였다. 결론적으로 본 연구는 설계초기 단계에서 상세한 건조비 모델(detailed production cost model)을 대화형 화상 처리방법에 접합시켜 이를 이용하여 여러가지 설계안의 도출과 비교검토를 신속히 처리할 수 있도록 함은 물론, 각종 생산 실적정보를 초기설계에 반영하는 최초의 시도라고 믿으며, 생산지향적(Design for Production) 최적설계분야의 발전에 많은 도움이 되기를 기대해 마지 않는다. 참고로 본 시스템의 설계 적용결과를 부록에 요약 소개하며, 상세한 내용은 참고문헌 [4] 또는 [7]을 참조 요망한다.

• The Korean Journal of Archival Studies
• /
• 제21호
• /
• pp.3-40
• /
• 2009

It has passed ten years since modern records and archives management in our country launched. During times, it has dramatically developed in the fields of law, institution and education. However a study on the definition of records and archives was non be studied enough compared to development of various research fields. In fact the reason why study on the definition was non fulfilled is that some aspects such as historical, informational, archival perspective have been coexisting without order in Korea. This situation is the biggest barrier that archival science is to a disciplinary field. Historically, 'archivium' in Latin language had developed in starting of its means place, then whole entity of documents and those organic relations. In this point, archives is rigidly separate to material of Historical science which covers all of recorded. Unlike information which is produced in the process of intended themes and following its outputs like books, documents in archival science is made in the natural process of work. In addition, historical archives which finished the current and semi-current stage and transfer to the institute of permanent conservation after the process of selection so that it is historical and cultural value to satisfy its purpose of making. This changed trend is based on the Second World War and necessity of North American society which needs to effciency and transparency of work. In Korea, records and archives management has been dominantly affected by North American society and become a subject of not arrangement but of classification, not of transferring but of collection. It is also recognized as management of on formation on the all recorded or documents not as an whole documents and all organic relations. But the original type of recognition is the only technology, it cannot have dignity as a field of science.

• The Journal of the Convergence on Culture Technology
• /
• 제7권3호
• /
• pp.215-222
• /
• 2021

Duchamp chose readymades mainly for his denial of retinal painting and his desire and fluid thinking for changes inside him. His thinking is well presented in his readymade works. One of his early readymades, Bicycle Wheel, expresses correlations between beings and capital. Its essence is capital and the desire of beings. It is connected to Desire or Desire-Machine proposed as a social reform and creation model by Gilles Deleuze and Félix Guattari. Bicycle Wheel does not simply end in desire relations between capital and beings, though. When the desire of beings is converted into positive desire, it can keep inventing and creating something that is repetitive, fluid, and new. Duchamp tried to convey this positive desire through his readymade Fountain. Duchamp created a ready-made article toilet into a work of art in Fountain, being driven by desire flowing inside him. This is connected to the attributes of nomads that refused to settle down and continue to flow in search of new landscapes. This way of his thinking is clearly reflected in his Box in a Valise. He was motivated to create this work by his fluid thinking. In this work, various situations can unfold often according to the directions of two elements, place and arrangement. Here, place guarantees fluidity, and arrangement variability or desire. According to Gilles Deleuze and Félix Guattari, fluidity represents nomads with the characteristics of flow and variation, and desire represents productivity or production or creation. Box in a Valise represents nomads themselves. The nomads defined by Gilles Deleuze and Félix Guattari keep flowing and create a new world. They are in line with the thinking of Duchamp that refused to settle down at one place and escape from the old order to create a new artistic world. This type of nomads can be called revolutionists or creators that acknowledge differences and create. Nomads also contain the concept of resistance to the old order. Deleuze and Guattari proposed a war machine as a model of this resistance. Duchamp and his readymades can thus be called war machines.