• Journal of Soil and Groundwater Environment
• /
• v.10 no.2
• /
• pp.35-43
• /
• 2005

Bioslurping combines the three remedial approaches of bioventing, vacuum-enhanced free-product recovery, and soil vapor extraction. Bioslurping is less effective in tight (low-permeability) soils. The greatest limitation to air permeability is excessive soil moisture. Optimum soil moisture is very soil-specific. Too much moisture can reduce air permeability of the soil and decrease its oxygen transfer capability. Too little moisture will inhibit microbial activity. So Modified Fenton reaction as chemical treatment which can overcome the weakness of Bioslurping was experimented for simultaneous treatment. Although the diesel removal efficiency of SVE process increased in proportion to applied vacuum pressure, SVE process was difficulty to remediation quickly semi- or non-volatile compounds absorbed soil strongly. And SVE process had variation of efficiency with distance from the extraction well and depth a air flow form of hemisphere centering around the well. Below 0.1 % hydrogen peroxide shows the potential of using hydrogen peroxide as oxygen source but the co-oxidation of chemical and biological treatment was impossible because of the low efficiency of Modified Fenton reaction at 0.1 % (wt) hydrogen peroxide. NTA was more efficiency than EDTA as chelating agent and diesel removal efficiency of Modified Fenton reaction increased in proportion to hydrogen peroxide concentration. Hexadecane as typical aliphatic compound was removed less than Toluene as aromatic compound because of its structural stability in Modified Fenton reaction. What minimum 10% hydrogen peroxide concentration has good remediation efficiency of diesel contaminated groundwater may show the potential use of Modified Fenton reaction after bioslurping treatment.

• 한국생물공학회:학술대회논문집
• /
• 2000.04a
• /
• pp.89-91
• /
• 2000

Polynuclear aromatic hydrocarbon (PAH) compounds are highly carcinogenic chemicals and common groundwater contaminants that are observed to persist in soils. The adherence and slow release of PAHs in soil is an obstacle to remediation and complicates the assessment of cleanup standards and risks. Biological degradation of PAHs in soil has been an area of active research because biological treatment may be less costly than conventional pumping technologies or excavation and thermal treatment. Biological degradation also offers the advantage to transform PAHs into non-toxic products such as biomass and carbon dioxide. Ample evidence exists for aerobic biodegradation of PAHs and many bacteria capable of degrading PAHs have been isolated and characterized. However, the microbial degradation of PAHs in sediments is impaired due to the anaerobic conditions that result from the typically high oxygen demand of the organic material present in the soil, the low solubility of oxygen in water, and the slow mass transfer of oxygen from overlying water to the soil environment. For these reasons, anaerobic microbial degradation technologies could help alleviate sediment PAH contamination and offer significant advantages for cost-efficient in-situ treatment. But very little is known about the potential for anaerobic degradation of PAHs in field soils. The objectives of this research were to assess: (1) the potential for biodegradation of PAH in field aged soils under denitrification conditions, (2) to assess the potential for biodegradation of naphthalene in soil microcosms under denitrifying conditions, and (3) to assess for the existence of microorganisms in field sediments capable of degrading naphthalene via denitrification. Two kinds of soils were used in this research: Harbor Point sediment (HPS-2) and Milwaukee Harbor sediment (MHS). Results presented in this seminar indicate possible degradation of PAHs in soil under denitrifying conditions. During the two months of anaerobic degradation, total PAH removal was modest probably due to both the low availability of the PAHs and competition with other more easily degradable sources of carbon in the sediments. For both Harbor Point sediment (HPS-2) and Milwaukee Harbor sediment (MHS), PAH reduction was confined to 3- and 4-ring PAHs. Comparing PAH reductions during two months of aerobic and anaerobic biotreatment of MHS, it was found that extent of PAHreduction for anaerobic treatment was compatible with that for aerobic treatment. Interestingly, removal of PAHs from sediment particle classes (by size and density) followed similar trends for aerobic and anaerobic treatment of MHS. The majority of the PAHs removed during biotreatment came from the clay/silt fraction. In an earlier study it was shown that PAHs associated with the clay/silt fraction in MHS were more available than PAHs associated with coal-derived fraction. Therefore, although total PAH reductions were small, the removal of PAHs from the more easily available sediment fraction (clay/silt) may result in a significant environmental benefit owing to a reduction in total PAH bioavailability. By using naphthalene as a model PAH compound, biodegradation of naphthalene under denitrifying condition was assessed in microcosms containing MHS. Naphthalene spiked into MHS was degraded below detection limit within 20 days with the accompanying reduction of nitrate. With repeated addition of naphthalene and nitrate, naphthalene degradation under nitrate reducing conditions was stable over one month. Nitrite, one of the intermediates of denitrification was detected during the incubation. Also the denitrification activity of the enrichment culture from MHS slurries was verified by monitoring the production of nitrogen gas in solid fluorescence denitrification medium. Microorganisms capable of degrading naphthalene via denitrification were isolated from this enrichment culture.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.45 no.12
• /
• pp.1755-1761
• /
• 2016

Volatile flavor compounds in soy sauce residue (SSR) and acid hydrolysate of SSR (AHSSR) were analyzed by solid phase micro extraction (SPME)/gas chromatography (GC)/mass spectrometry (MSD) methods. A total of 79 compounds were detected in samples (66 SSR and 60 AHSSR). Quantitatively, alcohols (433.37 ng/g), aldehydes (273.01 ng/g), esters (236.80 ng/g), and aromatic hydrocarbons (180.66 ng/g) were dominant in the volatiles of SSR, whereas furans (249.27 ng/g) were only dominant in AHSSR (P<0.05). Among these, four esters, 3-methylbutyl acetate (banana/pear-like), ethyl 3-methyl butanoate (fruity), ethylbenzene acetate (wine-like), and ethyl 3-methyl butanoate (apple-like), three alcohols, 3-methyl-1-butanol (fruity/whisky-like), 2-phenylethanol (floral/sweet), and 1-octen-3-ol (mushroom-like), four aldehydes, (E)-2-phenyl-2-butenal (chocolate-like), benzaldehyde (almond-like), 3-methylbutanal (malty), and 2-phenylacetaldehyde (floral), four aromatic hydrocarbons, 4-ethyl-2-methoxyphenol (smoky/soy sauce-like), 4-ethylphenol (medicine-like), 4-vinyl-2-methoxyphenol (woody), and phenol (woody), and two furans, furfural (almond-like) and 4-hydroxy-2,5-dimethyl-3(2H)-furanone (caramel-like), were major compounds in SSR, whereas seven compounds, including furfural, 5-methylfurfural (almond-like), 3-methyl-1-butanol, 2-phenylethanol, 4-ethyl-2-methoxyphenol, 3-methylbutanal, and benzaldehyde were major compounds in AHSSR.

• Safety and Health at Work
• /
• v.2 no.3
• /
• pp.210-217
• /
• 2011

Objectives: The purpose of this study was to measure the concentration of volatile organic compound (VOC)s originated from the chemicals used and/or derived from the original parental chemicals in the photolithography processes of semiconductor manufacturing factories. Methods: A total of four photolithography processes in 4 Fabs at three different semiconductor manufacturing factories in Korea were selected for this study. This study investigated the types of chemicals used and generated during the photolithography process of each Fab, and the concentration levels of VOCs for each Fab. Results: A variety of organic compounds such as ketone, alcohol, and acetate compounds as well as aromatic compounds were used as solvents and developing agents in the processes. Also, the generation of by-products, such as toluene and phenol, was identified through a thermal decomposition experiment performed on a photoresist. The VOC concentration levels in the processes were lower than 5% of the threshold limit value (TLV)s. However, the air contaminated with chemical substances generated during the processes was re-circulated through the ventilation system, thereby affecting the airborne VOC concentrations in the photolithography processes. Conclusion: Tens of organic compounds were being used in the photolithography processes, though the types of chemical used varied with the factory. Also, by-products, such as aromatic compounds, could be generated during photoresist patterning by exposure to light. Although the airborne VOC concentrations resulting from the processes were lower than 5% of the TLVs, employees still could be exposed directly or indirectly to various types of VOCs.

• Journal of Life Science
• /
• v.23 no.10
• /
• pp.1273-1279
• /
• 2013

Aromatic hydrocarbons, such as phenol, have been detected frequently in wastewater, soil, and groundwater because of the extensive use of oil products. Bacterial strains (56 isolates) that degraded phenol were isolated from soil and industrial wastewater contaminated with hydrocarbons. GN13, which showed the best cell growth and phenol degradation, was selected for further analysis. The GN13 isolate was identified as Neisseria sp. based on the results of morphological, physiological, and biochemical taxonomic analyses and designated as Neisseria sp. GN13. The optimum temperature and pH for phenol removal of Neisseria sp. GN13 was $32^{\circ}C$ and 7.0, respectively. The highest cell growth occurred after cultivation for 30 hours in a jar fermentor using optimized medium containing 1,000 mg/l of phenol as the sole carbon source. Phenol was not detected after 27 hours of cultivation. Based on the analysis of catechol dioxygenase, it seemed that catechol was degraded through the meta- and ortho-cleavage pathway. Analysis of the biodegradation of phenol by Neisseria sp. GN13 in artificial wastewater containing phenol showed that the removal rate of phenol was 97% during incubation of 30 hours. The removal rate of total organic carbon (TOC) by Neisseria sp. GN13 and activated sludge was 83% and 78%, respectively. The COD removal rate by Neisseria sp. GN13 from petrochemical wastewater was about 1.3 times higher than that of a control containing only activated sludge.

• Korean Journal of Food Science and Technology
• /
• v.34 no.5
• /
• pp.780-786
• /
• 2002

Optimum condition of the drying process and the changes in aroma components during dehydration were determined for Sarcodon aspratus. The drying curve of mushrooms consisted of short constant rate period followed by long falling rate period. The drying rate increased with increasing drying temperature and air velocity. Results showed that mushrooms dried at $50^{\circ}C$ and air velocity of 1.5 m/sec had the greatest peak area of aroma compound. The aromatic components of the dried mushrooms were 1-octen-3-one, 1-octen-3-ol, 3-octanone, 1-octanol, 2-octen-1-ol, 3-octanol, 3-octanone, 1-octanol, 2-octen-1-ol, and 3-octanol. Peak areas of mushroom alcohol and aromatic compounds of mushrooms including 1-octen-3-ol, 1-octanol, 2-octen-1-ol, 3-octanol decreased significantly, whereas those of 1-octen-3-one and 3-octane increased during the drying period. New unfavorable compounds including butyric acid, propanoic acid, and 3-methyl thiopropanol were formed during the drying period.

• Korean Journal of Plant Resources
• /
• v.24 no.4
• /
• pp.404-412
• /
• 2011

This study was carried out to compare and analyze the active ingredients of Korean native ginger and rhizome derived from in vitro shoot-tip culture of Korean native ginger. Proximate compositions, mineral nutrients, free sugars, fatty acids, volatile components, 6-gingerol, and 6-shogaol were analysed and evaluated. Korean native ginger was proved to have a little more contents than in vitro rhizome in proximate compositions (crude ash, crude lipid, crude protein, carbohydrate). Mineral nutrient contents (Cu, Fe, Mn, Zn) of in vitro rhizome were higher than those of Korean native ginger. Among the mineral nutrients, the quantity of K was the highest, followed by P, Mg, Na, and Ca. Free sugar contents (fructose, glucose, sucrose) of in vitro rhizome were higher than those of Korean native ginger. Fatty acids containing less than C14 was the major among the fatty acids in ginger. Citral ingredient of the unique aromatic compound of Korean native ginger was stronger than that of the rhizome derived from in vitro shoot-tip culture. Gingerol concentration was increased by shoot-tip culture.

• Applied Chemistry for Engineering
• /
• v.30 no.3
• /
• pp.297-302
• /
• 2019

In order to investigate structural changes of the pyrolysis fuel oil (PFO), the volatile matters and heavy oil fractions were separated from PFO by heat treatment temperature. As a result of $^1H-NMR$ analysis of volatile matters, 1~2 ring aromatic compounds contained in the petroleum residue were mostly removed at a temperature before $340^{\circ}C$. Moreover, new peaks corresponding to aliphatic hydrocarbons were detected at the chemical shift of 2.0~2.4 ppm. It is attributed that the aliphatic hydrocarbon sidechain was cracked from the aromatic compound by the cracking reaction occurred at $320^{\circ}C$. The C/H mole ratio and aromaticity increased with increasing the heat treatment temperature. Therefore, from the structural analysis results of heavy oil fractions and volatile matters from PFO, the decomposition of the aliphatic sidechain by cracking reaction and the separation of volatile matters by boiling point of components were mostly affected structure changes of the PFO.

• Applied Chemistry for Engineering
• /
• v.26 no.2
• /
• pp.234-238
• /
• 2015

The separation of nitrogen heterocyclic compound (NHC) contained in a model coal tar fraction was compared by the methanol and formamide extraction. The model coal tar fraction comprising four kinds of NHC (NHCs : quinoline, iso-quinoline, indole, quinaldine) and three kinds of bicyclic aromatic compound (BACs : 1-methylnaphthalene, 2-methylnaphthalene, dimethylnaphthalene), biphenyl and phenyl ether was used as a raw material. The aqueous solution of methanol and formamide were used as solvents. A batch-stirred tank was used as the raw material - a solvent contact unit of this work. Independent of the solvent used, the distribution coefficient of NHCs sharply increased by decreasing the initial volume ratio of water to the solvent and increasing the equilibrium operation temperature, whereas, the selectivity of NHCs in reference to BACs decreased. Decreasing the initial volume ratio of solvent to feed resulted in deteriorating distribution coefficients, but the selectivity of NHCs in reference to BAC was almost the constant. The distribution coefficient of NHCs by the methanol extraction was 3~5 times higher than that of NHCs by the formamide extraction, inversely, the selectivity of NHCs based on BACs by the formamide extraction was 3~7 times higher than that of NHCs by the methanol extraction. Furthermore, two different solvent extraction methods by adding the extraction processing speed to the balance between solvency and selectivity of NHCs were compared.

• The Korean Journal of Pesticide Science
• /
• v.14 no.3
• /
• pp.199-208
• /
• 2010

Phenylformamidine derivatives are well known as insecticides for their specific activity against the insects. It has now been established that they show insecticidal activity as agonists on the octopamine receptor. In order to get a highly active compound we have intensively exploited fluorine substituted-aromatic formamidines possessing N-dialkylaminosulfeny group. Up to now, there are several candidates we found: N-(dialkylamino)sulfenyl-N-methyl-N'-(4-fluoro-2-methylphenyl)formamidines. The miticidal activity of Compound 29 show five-fold higher than Amitraz.