• 전자공학회논문지CI
• /
• 제40권2호
• /
• pp.9-16
• /
• 2003

본 논문에서는 개선된 SOFM(Self Organizing Feature Map)방식을 이용한 근전도 패턴인식으로 가상 로봇 팔을 제어하는 방식을 제안한다. 개선된 SOFM 방식은 근전도 신호의 전처리기를 사용하는 대신에 근전도 신호 자체를 SOFM에 입력으로 사용하고, 퍼지논리시스템을 이용하여 SOFM의 이웃반경과 학습율을 자동 조절하는 간단한 방식으로 입력 패턴을 더욱 빠르고 신뢰성있게 분류한다. 개선된 방식의 성능을 확인하기 위하여 어깨, 손목, 팔꿈치의 여섯 가지 동작의 근전도 패턴인식을 실험한 결과 기존의 일반적인 SOFM방식보다 제안한 SOFM방식의 인식율이 21.7% 향상되고, 평균학습 수도 절반이하로 감소되었으며, 인식한 근전도 신호를 이용하여 컴퓨터 상의 가상 로봇 팔을 정확하게 제어하였다.

• 한국의류학회지
• /
• 제21권6호
• /
• pp.1031-1040
• /
• 1997

This study was done to analyze the body surface developments of armhole area. The major conclusions of this study are: 1. The body surface developments showed the characteristics of expansion and contraction of body at armhole area. By arm movements, front armhole lines on the body surface developments of upper arm were slow going, but back armhole lines were full and round. As a whole, armhole line of the back torso was swollen outside especially at backarmpit point area, it seemed like a line of raglan sleeve. 2. Regression Analysis was carried out to adapt armhole line on the upper arm and upper body to bodice and sleeve pattern, following the axillary circumference line and chest breadth line changed to the basic pattern form. As the result, armhole lines of 90$^{\circ}$ and 135-180$^{\circ}$ movements deviated from those of standard posture. U-type, clear armhole curve of standard posture turned to V-type, slanting line by arm movements.

• 한국의류학회지
• /
• 제32권4호
• /
• pp.641-650
• /
• 2008

In this study, seven models with distinctly different body types were researched and explanatory variables were reviewed. Review was done by using body measurements and the measurements of the appropriate bodice patterns in 1D, 2D, and 3D measurement methods in order to review the pattern making system and the equations for calculating the dimensions of the sleeve caps, which are readily available. Data on human bodies, which can be the criteria for each body part required for the new system for making sleeve cap part, were selected considering conditions such as items with a significantly high contribution rate from the results of regression analysis and the easiness of measurement. As a result of research, an explanatory variable required for the system for making sleeve caps with high general use was extracted. All items with the exception of the waist circumference and upper arm circumference were about the measurement of the form of human bodies, which were newly set in this study. As a result of this study, the equations for calculating the dimensions of each part of the sleeve caps showed distinct differences in comparison to the conventional system of construction.

• PNF and Movement
• /
• 제12권1호
• /
• pp.7-12
• /
• 2014

Purpose: The purpose of this study is to analyze the effect of the arm extension pattern of proprioceptive exercise program on the muscle activity of the opposite lower extremity. Methods: In this study, electromyogram MP150(Biopac system, USA) was applied to 20 healthy male subjects. Arm extension-adduction-internal rotation pattern was applied within initial, mid and end range in sling position and supine position for measurement. And the effect on the activity of rectus femoris and tibialis anterior muscle of the opposite lower extremity was compared and analyzed. Results: The results of this study were summarized as follows: First, there was a statistically significant difference of the activity of the tibialis anterior muscle within the Initial range in sling position and supine position(P<0.05). Second, there was a statistically significant difference of the activity of the tibialis anterior muscle within the end range in sling position and supine position(P<0.05). Conclusion: Rectus femoris and tibialis anterior muscles shows the higher activity in the supine position than in the sling position. Therefore, the supine position is more appropriate than the sling position to make irradiation on lower extremity muscle with the extension pattern.

• 복식문화연구
• /
• 제15권6호
• /
• pp.1038-1052
• /
• 2007

The purpose of this study is to analyze present the pattern making of the lining fabrics calculating the right ease and rising quantities of arm-hole when the pattern of the lining fabrics of stretchable jacket fabrics is produced. The outcomes of this study are as follows. The right ease of lining fabrics was not room of 0cm as patterns being same the right side of fabrics in the girth of the chest, waist, and the edge of a garment and gets the most excellent valuation, and then the girth of the chest, and waist was applied to 2cm and around the edge of a garment 0cm in regular lining fabrics. In addition to, although the ease of patterns of the lining fabrics was more, it was not necessarily to satisfy. The result of the valuation according to the quantities of rising arm-hole of the pattern of the lining fabrics showed that the making lining fabrics that the quantities of rising arm-hole was 0.8cm in the body and 1.2cm in the sleeve in the both the stretchable fabrics and regular lining fabrics was the most excellent thing, and then 0cm in the body and 2cm in the sleeve, and then 0cm in the body and 0cm in the sleeve. The valuation of external appearance on the quantities of rising arm-hole was recognized similarly because of being rarely significance level, but around the chest and waist was recognized as being significance level in wearing satisfaction.

• 대한가정학회지
• /
• 제19권3호
• /
• pp.21-32
• /
• 1981

Clothing must have the individual beauty and the function that one can do one's body movement freely. therefore, from the human engineering view point, the exact measurement of the human body and the analysis of it's results must be applied to clothing because the arm works most. In this study, the skin surface of arm was investigated by shell made of Alginate of each movement. And by sometic method the rate of expansion and contraction of each section, inter-relation among the bust girth, axillary arm girth and scye girth and between the shoulder length right and the under axilla waist length were calculate4d. With these results, cap height, breadth of a sleeve and arm hole girth of existing sleeve pattern have been compared and analysed. The results are as follows; 1) According to the developmental figures of shell, the whole area change was small but that of shape was remarkable in M 4, 9, 13. The change of the Block 1 was particular. 2) Over arm length was contracted in all movements except M6 and under arm length expanded. The changes of sections a, b, c are large, while those of sections d, e are small. 3) In terms of latitudes, change of fore-arm region was small. The rate of scye girth varied from 14.3% of M13 to-5.6% of M2. The breadth of a sleeve expanded in all movements, and especially the front region expanded more than the back. 4) The relation between the shoulder length right and under axilla waist length, in all occasions, was contracted mutually, and one contracted, the other expanded. Therefore, in clothing construction when we consider the function of the arm it is better to widen the arm hole and the breadth of a sleeve at the same time than no widen the shoulder length by lowering the upper part of the upper side seam line.

• 한국의류학회지
• /
• 제27권2호
• /
• pp.219-228
• /
• 2003

The purpose of this study were to examine the characteristics of arm types proposed in the previous study and to present sleeve patterns according size and shape of 4 arm types. 31 direct and indirect items were measured. The subjects for this study were 132 females of twenties. The results were as follows. 1. All of the direct measurements showed significant difference by the arm types. especially at the front armhole part. Such a.: the items of arm gradients, armhole sizes belong to the indirect measurements made clear difference also. 2. By the discriminant analysis, 9 items including underarm length, front armhole girth, upper arm girth, degree of elbow point-wrist point discriminated arm type by the hit ratio of 90.4% Item related to shape of arm rather than size made a sharp distinction. 3. Through the examination of existing patterns and wearing tests on the subjects among 4 groups, sleeve patterns classified by the arm type were suggested.

• 한국의류학회지
• /
• 제20권5호
• /
• pp.852-859
• /
• 1996

The factors and mechanism of arm surface changes were analyzed by regression analysis for the relationship between changes in arm joint angle and arm surface changes, according to the direction of upper extremity motion. Body surface change patterns among subjects were tested also. Experiments were carried out on 3 female subjects of different body types to examine 26 motions in 4 directions for 4 upper extremity parts. The major conclusions of the study are as follows: 1. The expansion or contraction of arm surface length depends on the direction of upper extremity motion. 2. Arm surface length changes by linear expansion or contraction according to the joint angle of the direction of motion. The mechanism of arm surface changes is represented by a linear relation between arm surface changes and the (actors of the direction of upper extremity motion and arm joint angle. 3. Arm surface length shows the same pattern of body surface changes regardless of body type. A quantitative model of body surface changes at upper extremity should be developed for functional sleeve design.

• 대한가정학회지
• /
• 제24권2호
• /
• pp.1-11
• /
• 1986

The subject, in the blouses that sleeve caps and sleeve lengthes are different from, did sensory test by right arm movement and both arms movement. This sensory test which is used in fabric good, is Shef's. RESULTS : 1) The ease of bust size is very significant by cap height, at 5%, 1% level by sleeve length. 2) The front area of arm hole is affected by cap height, sleeve length movements more than the back and the under area of arm hole are 3) Sleeve width is affected by cap height, sleeve length both arms movement. That is, they should be designed according to the use because they affect the ease of blouse very much. Especially bust size should be considered with sleeve pattern because the ease bust becomes different with sleeve pattern.

• 기술혁신연구
• /
• 제14권2호
• /
• pp.143-165
• /
• 2006

By analyzing five in-depth case studies of suppliers in newly emerging Vietnam's motorcycle industry, this paper explores the differences in patterns and processes of capability improvement of suppliers who participate in different kinds of supplier-assembler network with different structures. The paper finds the correlation between the kinds of suppliers' capabilities improved and the structure of networks they participate in. While suppliers in arm-length networks can improve more upstream capabilities (structure design, process desist), suppliers in embedded networks can improve more downstream capabilities (process design, process setup, process maintenance and delivery control). Two capability improvement patterns of firms in newly emerging economy are indicated. The first pattern is asymmetrical improvement, either upstream or downstream capabilities, by participating in either arm-length or embedded networks. This pattern obstructs the suppliers to meet the requirements of new buyers rho come from different kinds of network. The second pattern is symmetrical improvement by joining both arm-length and embedded networks.