• Journal of the Korea Fashion and Costume Design Association
• /
• v.19 no.4
• /
• pp.123-137
• /
• 2017

The purpose of this study is to suggest sleeve cap height with a satisfying wearing sensation and appearance on jackets for women in their twenties so that high-consumer demand jackets can be produced. Five experimental jackets with sleeve cap heights of [(AH/3)-1cm], [(AH/3)-0.5cm], [AH/3], [(AH/3)+0.5cm] and [(AH/3)+0.8cm] were made for 30 subjects to try on after which the subjects were then surveyed for their assessment of appearance, wearing sensation and preference. On the basis of the results, the optimum height of the sleeve cap has been proposed along with the following contents and results of this research. 1. [AH/3] [(AH/3)+0.8cm] of sleeve cap height was assessed to beof desirable appearance. 2. [AH/3] of sleeve cap height garnered a high opinion in terms of intuitive wearing sensation, while [(AH/3)-1cm] [AH/3] were the heights with overall satisfaction of intuitive and movement wearing sensations. If discomfort in the upper sleeve at 'straight arm' posture can be tolerated, the sleeve cap height can be set to [(AH/3)-1cm]~[(AH/3)+0.5cm]. 3. [AH/3] and [(AH/3)+0.5cm] were found to have a high preference among wearers, which indicated that the women in their twenties prefer a slim type of sleeve, putting appearance above wearing sensation. Consequently, [AH/3] is desirable when appearance, wearing sensation and preference are considered, [(AH/3)+0.5cm] is fit for business uniform for static duties or formal dress focused on aesthetic impression and [(AH/3)-1cm]~[AH/3] are desirable for work clothes when considering active duties.

• Fashion & Textile Research Journal
• /
• v.22 no.5
• /
• pp.650-659
• /
• 2020

The present study provides reference data required for the design of clothing for the elderly by analyzing the body surface area during fitness motion based on 3D scan data of Korean elderly women. This study was conducted with the procedures of (1) survey of motions and main muscles for fitness, (2) acquisition of 3D scan data, and (3) analysis of rate of change for body surface area during fitness motion. Acquisition of 3D body scan data was obtained from seven elderly females (age: 64-77). We selected 66 anatomical landmarks (40 upper body and 22 lower body) by referring to previous studies. Body surface was segmented by connecting the landmarks marked on the 3D scan data acquired. Analysis of body surface area was conducted in terms of the change rate of surface area in 9 postures of elbow 0°, 90° and 180° for flexion, shoulder 90°, 180° for flexion, shoulder 0°, 180° for abduction, hip 90° for flexion, and knee 90° for flexion compared to the those in the standing posture. The amount of changes in body surface area were 12%-62% in the upper body, 15%-77% in the arm, and 10%-51% in the lower body. A future study on the rate of change of body surface length is needed; in addition, a study on how to apply the results of body surface area and body surface length analysis to clothing pattern design is also necessary.

• Korean Journal of Applied Biomechanics
• /
• v.13 no.3
• /
• pp.293-309
• /
• 2003

The purpose of this study was to analyze the kinematic variables of the right-straight punch(RSP) in boxing with three-dimensional analysis technical methods. The subjects are boxers who have been playing in national boxing representative team and the RSP is their special favorite technique, The right-straight punches were filmed on 16mm video cameras(30frames/sec.) The kinematic variables were temporal, postural and center of gravity(COG). The mean and the standard deviation of variables have been obtained and used as basic factors for examining characteristics of the RSP by out-boxers. From the data analysis and discussion, the following conclusions have been drawn. 1) Temporal variables It is a significant characteristic that LDJ and KDM s' the amount of elapsed time(EF) needed for both an attack and a defense were similar : ET for stretch-out of attack-arm was $0.52{\pm}0.04\;sec$. and return was $0.54{\pm}0.01\;sec$. Therefore, a defense motion is as important as an attack motion. 2) Posture variables When the subjects performed a RSP, the significant characteristic of the ankle angle was that it wasn't completely returned to the original position after stretching-out. Therefore it is necessary to do supplementary exercises, such as side steps, to move the center of gravity more effectively. The hee angle was not fully stretched either. In regard to the hip angle, it should be rotated with all strength to harmonize with the direction of movement. 3) Center of Gravity(COG) variables When both LDJ and KDM performed a RSP, a significant characteristic was the transformation of sagittal view rather than transverse or frontal views.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.21 no.4
• /
• pp.55-67
• /
• 2019

This study analyzed the fabric and product size of the burn patient's custom compression garment and measured the pressure applied by the garment to assess whether proper pressure is being delivered for treatment. The test clothes were presented to the market by body size and commissioned with the same design. The subjects selected four people close to the average body size of men in their 20s determined by 7th Size Korea. The experiment was conducted by wearing a compression suit, performing activities and measuring changes in the pressure of the garment according to changes in posture. The fabric used for the compressive clothing was not ruptured even at 216 kPa, the elasticity recovery rate was measured between 80.5 and 94.5%. The product dimensions of the experimental clothing varied by up to 8cm from brand to brand, requiring the standardization of compression clothing. The experiment showed that four types of compression suit varied in pressure, and the pressure range, excluding the gastric arm (17.9mmHg), was between 2.5-14.1mmHg, which failed to meet the level of pressurization for treatment purposes. The clothing pressure in the chest area dropped when performing movements rather than standing still. This was interpreted to be a result of reduced the adhesion of the compression suit during operation. The peak pressure (31.68mmHg) and the lowest pressure (2.2mmHg) was noted in the scapula, indicating that no pressure was being transmitted on the vertebrae. The pressure of the garment on the right shoulder blade was elevated in a supine position. Because much time is spent laying down, it is necessary for the pattern design to accommodate for the increased clothing pressure on the shoulder blades. Standardization of the level of pressurization for burn patient's custom-made pressure suits for each stage of treatment is urgently required.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.28 no.2
• /
• pp.211-221
• /
• 2018

Objectives: The purpose of this study was to identify work-related risk factors associated with upper extremity symptoms among construction workers using the fourth Korean Working Condition Survey(KWCS). Methods: Subjects were 2,724 construction workers selected from 50,007 respondents in the 2014 KWCS. The presence or absence of upper extremity symptoms and work-related risk factors, including individual, physical, and psychosocial factors, were used as variables. A multiple logistic regression analysis was performed in order to evaluate the relationship of the upper extremity symptoms with work-related risk factors. Results: Upper extremity symptoms were significantly associated with: employment type(OR: 1.57, 95% CI: 1.18~2.09); job satisfaction(OR: 2.06, 95% CI: 1.33~3.18); verbal abuse(OR: 2.06, 95% CI: 1.33~3.18); tiring or painful posture(OR: 2.33, 95% CI: 1.73~3.15); carrying or moving heavy loads(OR: 1.68, 95% CI: 1.23~2.24); repetitive hand or arm movement(OR: 1.42, 95% CI: 1.06~1.91) Conclusions: In order to prevent the upper extremity musculoskeletal disease in the construction industry, it is necessary to stabilize employment, enhance job satisfaction, and eliminate violence in the workplace and improve physical work environment.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.43 no.6
• /
• pp.866-876
• /
• 2019

This study examined the physiological and psychological effects of wearing gloves at rest in a cold environment. Seven elderly females participated in two separate trials: wearing gloves (WG) and bare hands (BH). The experiment was conducted for 60 min in a climatic chamber (air temperature 7.8±0.3℃ with 44±2%RH) with a sedentary posture. Microclimate temperature on the left palm was 4.16℃ higher in WG compared to that in BH (p<.1). Microclimate temperature on the chest during the last 5 min increased compared to the initial 5 min only in WG (p<.05). During the last 5 min, skin temperatures at the arm and hand in WG were higher than those in BH (p<.05). There was no statistical difference in the change of rectal temperature between WG and BH. Heart rate in BH was significantly higher compared to the WG (p<.05). Subjects also felt less cold on the whole body and hand in WG than those in BH (p<.05). The findings indicate that wearing gloves for elderly females affected the distribution of skin temperature and cardiovascular response in cold environments. Elderly females should be informed about the importance of wearing gloves through the clothing guideline in winter.

• Physical Therapy Korea
• /
• v.19 no.2
• /
• pp.69-79
• /
• 2012

Importance of the work-related musculoskeletal disorders (WMSDs) has been increasing in the hospital industry such as health care industry and financial industry. This study investigated in order to identify the factors like general, occupational and ergonomically characteristics of the subjects related to musculoskeletal disorders (MSDs) of physical therapists (PTs). Ergonomic tools of rapid upper limb assessment (RULA) were used for evaluation workload of the tasks. Prevalence of MSDs were 13 PTs (26.0%) for neck, 31 PTs (62.0%) for shoulder, 9 PTs (18.0%) for arm/elbow, 27 PTs (54.0%) for hand/wrist, 28 PTs (56.0%) for back, 14 PTs (28.0%) for leg/foot. The analysis of the rate of the pain intensity showed that 53.5% subjects experience moderate pain and 14.0% subjects experience severe pain. Factors which were general characteristics, for example, height, ergonomically characteristics such as 'Posture Score A' were related musculoskeletal subjective symptoms in logistic analysis (p<.05). Among physical therapists, action level of RULA were action level 2 (6.0%), action level 3 (52.0%), action level 4 (42.0%). Physical therapists were estimated one of the highest risk factor in this study. This study suggested that the need of preventive education and program for PTs (physical therapists). Comprehensive and systematic management plans should be established to include both ergonomic and sociopsychological aspects.

• Physical Therapy Rehabilitation Science
• /
• v.6 no.2
• /
• pp.65-70
• /
• 2017

Objective: The purpose of this study was to examine the intertester reliability and validity of four nonradiologic measurements of thoracic spine rotation in healthy adults. Design: Descriptive laboratory study. Methods: This study was conducted on 20 male and 20 female university students aged between 19 and 26. To measure thoracic rotation, a goniometer, a bubble inclinometer, a dual inclinometer, and a smartphone application-clinometer were used. The measurement was performed twice for each device and the same measurement was performed by two examiners. The measurements were performed in the lumbar locked position. The arm in the direction of rotation was taken back and placed onto the back of the lumbar region. With right and left trunk rotation, the head was rotated together but remained in the center line so that the axial rotation was maintained. Both examiners performed the measuring procedures and directly handled the measuring instrument. All measurement results were recorded by the recorder. Results: The range of motion (ROM) of thoracic rotation in lumbar locked position for all four devices was 47 degrees. The intra-rater reliability estimates ranged from 0.738 to 0.906 (p<0.05). The inter-rater reliability estimates ranged from 0.736 to 0.853 (p<0.05). The goniometer, bubble inclinometer, dual inclinometer, and smartphone clinometer showed high validity (p<0.05). This result indicates that all four devices may be used by the same examiner and by other examiners obtaining follow-up measurement. Conclusions: The use of the goniometer, bubble inclinometer, dual inclinometer, and smartphone clinometer for measurements in the lumbar locked posture are reliable and valid nonradiologic measures of thoracic rotational ROM in healthy adults.

• Journal of the Korea Safety Management & Science
• /
• v.19 no.3
• /
• pp.71-79
• /
• 2017

The purpose of this study was to identify the observable symptoms of musculoskeletal disease from electronic components manufacturing workers who involved in many repetitive tasks and to provide the basic data for the prevention and management. The survey was conducted on 721 people from 15 April, 2013 to 17 May, 2013 by self­recording type. The results of the study are as follows. First, symptom complaints based on different body parts are in following order, waist was 12.9%, shoulder was 10.5%, neck was 7.4%, hand/wrist/finger was 7.4%, leg/foot was 4.4%, arm/elbow was 2.8%, and 21.9% of the respondents showed symptoms in more than one body part. Sex, age, marital status, work experience, work intensity, and past accident experience were statistically significant. Second, in the job stress evaluation, all male and female workers were below the median of Korean workers in all of 8 categories. the higher the scores for lack of job autonomy, the higher the symptom complaints of musculoskeletal disease. In the case of patients complain observable symptoms of musculorskeletal disease, they should receive proper outpatient treatment, various programs such as stretching by body parts, setting up a desirable working posture, switching to cyclical work, should b developed as much as possible.

• Journal of Korean Physical Therapy Science
• /
• v.24 no.1
• /
• pp.14-21
• /
• 2017

Background; This study was to investigate effects of distance of muscle activity of 4 sections of rectus abdominis(RS-RA, LS-RA, RI-RA, LI-RA) by the shoulder width(x0.5, x1.0, x1.5) and the angle of the elbow joint($0^{\circ}$, $45^{\circ}$, $90^{\circ}$) Method : This study was conducted on 20 healthy male and 20 female adult. respectively, elbow joints were maintained at $0^{\circ}$, $45^{\circ}$, and $90^{\circ}$ flex postures on The shoulder width is 0.5, 1.0, and 1.5 times. at the same time 4 sections of rectus abdominis were measured using EMG with maintaining isometric contraction of the rectus abdominis for 5 seconds. Results; The results were as follows: First, muscle activity of 4 sections of rectus abdominis(RS-RA, LS-RA, RI-RA, LI-RA) by angle of the elbow joint($0^{\circ}$, $45^{\circ}$, $90^{\circ}$) was a statistically significant(p<0.05), Second, muscle activity of 4 sections of rectus abdominis(RS-RA, LS-RA, RI-RA, LI-RA) by the shoulder width(x0.5, x1.0, x1.5) was a statistically non-significant Conclusion; It was found to be most effective to perform arm posture with rectus abdominis muscle strength exercise.