• Journal of Advanced Research in Ocean Engineering
• /
• 제4권3호
• /
• pp.115-123
• /
• 2018

This study was carried using the new approach method to design appropriately the Loading Arm length and the alarm setting according to ship movements on Loading and Unloading marine Berth. The quasi-static mooring analysis was performed to estimate 110,000DWT ship's movements based on environmental conditions such as wind, current and wave. The mooring motion of the ship is very important to determine the loading arm scope, and in this case, the operation condition is performed on the ship without considering the damaged condition of the mooring line because the ship movement in case of damage is larger than intact, and all operations are stopped, the loading arm being released due to control system. From the result of mooring analysis, motion displacements, velocities and accelerations were simulated. They were used to simulate the maximum drifting speeds and distances. The maximum drifting speeds were checked to be satisfied within drifting speed limits. The total maximum drifting distances were simulated with alarm steps of the new approach method. Finally, the loading arm envelopes using the total maximum drifting distances were completed. Therefore, it was confirmed that the new approach method for loading arm envelopes and alarm settings was appropriate from the above results. In the future, it will be necessary to perform the further advanced dynamic mooring analysis instead of the quasi-static mooring analysis and to use the precise computer program analysis for various environments and ship movement conditions.

• 한국의류학회지
• /
• 제12권2호
• /
• pp.237-248
• /
• 1988

To access the appropriate height of sleeve cap which is required for the basic sleeve pattern according to arm movements, plaster gypsum experiment was performed. Arm movements were 5types ($0^{\circ},\;45^{\circ},\;90^{\circ},\;135^{\circ},\;180^{\circ}$) to the vertical directions in the front. The appropriateness of the pattern was analyzed by measuring clothing pressure. The results obtained were as follows: 1. Increasing the movement angle, sleeve width increased but height of sleeve cap and armhole girth decreased. 2. Increasing the movement angle, the acromion moved to the front part of bodice. 3. On the basis of the result of the height of sleeve cap, the $\frac{AH}{4} +2.5cm$ sleeve basic 4 pattern is suitable for the direction $M_1(0^{\circ}),\;M_2(45^{\circ})$, and the $\frac{AH}{5}$sleeve basic pattern is suitable for the direction $M_3(90^{\circ}),\;M_4(135^{\circ})$, and $M_5(180^{\circ})$. 4. As the movement angle and height of sleevecap increased, the part which receive high pressure increased and the difference between the hightest and the lowest clothing pressure increased. 5. By the variation of movement angle and height of sleevecap, clothing pressure of upperarm was affected more than that of shoulder blade. 6. The clothing pressure of upperarm and shoulder blades were more affected by the height of sleeve cap than the ease of breast area. 7. Considering the clothing pressure of various arm movement, the most appropriate height of sleeve cap for $M_1(0^{\circ}),\;M_2(45^{\circ})$ positions was to use the $\frac{AH}{4}$+2.5cm, and for $M_3(90^{\circ}),\;M_4(135^{\circ})$, and $M_5(180^{\circ})$, was $\frac{AH}{5}$.

• 대한가정학회지
• /
• 제24권2호
• /
• pp.1-11
• /
• 1986

The subject, in the blouses that sleeve caps and sleeve lengthes are different from, did sensory test by right arm movement and both arms movement. This sensory test which is used in fabric good, is Shef's. RESULTS : 1) The ease of bust size is very significant by cap height, at 5%, 1% level by sleeve length. 2) The front area of arm hole is affected by cap height, sleeve length movements more than the back and the under area of arm hole are 3) Sleeve width is affected by cap height, sleeve length both arms movement. That is, they should be designed according to the use because they affect the ease of blouse very much. Especially bust size should be considered with sleeve pattern because the ease bust becomes different with sleeve pattern.

• 대한인간공학회지
• /
• 제15권1호
• /
• pp.39-52
• /
• 1996

This paper measured the range of arm joint motion for Korean 54 males in twenties. The range of the arm joint motion of the subjects was measured directly using Goniometer and protractor. The number of the static and the dynamic anthropometric variables are seven and thirteen, respectively. The anthropometric data are analyzed by basic statistical analysis (four group), correlation analysis and regression analysis using commercial SAS program. The results of analysis are compared with American students anthropometric data by Laubach(1978). Thin subjects have larger movement angle as wrist flexion, wrist abduction, elbow flexion, and elbow wupination and have smaller as wrist adduction and shoulder flexion. Fat subjects have larger movement angle as shoulder flexion and are smaller wrist abduction, elbow flexion, pronation, shoulder extension, shoulder adduction, shoulder abduction, and shoulder medial rotation Korean are more flexible than American in wrist and ranges of elbow flexion and elbow rotation. The shoulder movement is similar to that of American, but shoulder flexion is less flexible.

• 한국의류학회지
• /
• 제33권8호
• /
• pp.1181-1189
• /
• 2009

This research analyzes the relationship between the height of the sleeve cap and the mobility of arm movement. Ten Korean women participated as subjects. For test clothes, the AH/4+3, AH/4+1, and AH/4-1 height of the sleeve cap were varied. The sleeve circumference was adjusted according to the variation of the height of the sleeve cap. To analyze test clothing objectively, the range-of-motion of two selected movements (Arm Adduction/Abduction and Arm Flexion/Extension) was measured by Leighton flexometer and goniometer. Also, a wearer acceptability rating was examined for acceptance by the subject. Anova and Duncan's multiple range tests are used for statistical analysis. According to the results, the mobility of test clothing 2 and 3 improved 14.9% and 27.7% in Arm Adduction/Abduction, and 12.7% and 31.9% in Arm Flexion/Extension compared to the test clothing 1.

• 한국정밀공학회지
• /
• 제26권2호
• /
• pp.71-77
• /
• 2009

In the automotive industry, aluminum is widely used to reduce the vehicle weight. Aluminum curved extruded components are used for the design of frame parts. This study investigates the curvature extrusion process to produce the aluminum curved suspension arm. In the curvature extrusion process, the bending process is simultaneously carried out with the extrusion process. Firstly, porthole extrusion was investigated by using FE analysis to produce aluminum suspension arm. And then the bending process condition was determined to produce the final suspension arm with the required curvature. In this research, the guide roll movement causes the bending of extruded product. The moving distance and velocity of guide roll were controlled to meet the required curvature of suspension arm. Finally, the curved suspension arm was manufactured by the curvature extrusion experiment under the proposed curvature extrusion condition.

• 한국전문물리치료학회지
• /
• 제27권1호
• /
• pp.11-18
• /
• 2020

Background: As technology has progressed, various robot-assisted devices have been developed to reduce therapists' labor and assist in therapy. However, due to their many limitations, it is more practical to use traditional mechanical devices. The grahamizer is one such traditional mechanical device used clinically to rehabilitate the upper extremities. No study has yet established the efficacy of the grahamizer in individuals with stroke. Objects: This study investigated the immediate change in arm reaching after the use of a grahamizer. Methods: Twenty-two stroke survivors participated in this study (11 males and 11 females). The reaching of the more-affected arm was measured three times using the three-dimentional electromagnetic motion tracking system "trakSTAR". After the first measurement, the subjects performed 500 rotatory arm exercises using the grahamizer. To assess the grahamizer's effect, the subjects were remeasured in the same way. Results: There were significant increases in the reaching distance (p < 0.05) and movement smoothness (p < 0.05) of the more-affected arm after using the grahamizer. Conclusion: Our study confirms that using the grahamizer is beneficial in the rehabilitation for improving movement of the more-affected arm in stroke survivors.

• 한국의류학회지
• /
• 제27권5호
• /
• pp.485-495
• /
• 2003

This study was to compare and analyze the clothing pressure according to arms movements of 4 brands jacket for middle-aged women group by measuring clothing pressure of each brand. The results were as follows: 1. According to the analysis of jackets of 4 brands, in general, jacket C had the largest ease amount. while jacket A had a large ease amount in waist, hip areas compared with bust area. Also jacket B had a small ease amount in bust, waist areas and jacket D had a small ease amount in hip areas. Therefore the ease amount is different between each brand, each size even though jacket designs are similar. 2. It was found that clothing pressure was affected by arm movements than jackets. Since this study was limited to the arm movement for motion variation, it was recognized that a significant difference among each jacket and each movement at shoulder, waist parts existed with relation to this motion. 3. Parts showing a significant difference among each size were bust point, abdomen point, center back point of abdomen level, angulus superior scapulae point and center back point of waist level. Also clothing pressure of size B91 was bigger than size B88 except Center back point of waist level. 4. Clothing pressure in shoulder point, front armpit point, back armpit point, upper arm point areas increased as the angle of the arms movement increased. Also, individual variation of clothing pressure in front armpit point, back armpit point, armpit point and upper arm point was large, and clothing pressure in abdomen point was high in M5(sitting posture).

• 대한인간공학회지
• /
• 제18권1호
• /
• pp.91-108
• /
• 1999

In our previous work using a motion analyzer and 3-dimensional sonic digitizer, the arm shapes for 23 women in their early twenties were classified into three characteristic types. In order to design sleeves, suitable for arm movements for the three characteristic arm shapes, a relationship between arm length variation and shoulder/elbow angles has been investigated for four cases of arm movements (flexion, extension, adduction and abduction). Each arm movement can be characterized by the changes in shoulder angle and the changes in elbow angle at the maximal shoulder angle. In all the four cases of arm movements, the changes of shoulder length and cap height are largest at the maximal shoulder angle. These changes were little affected by changes in elbow angle. The changes in the lower arm length and the difference between cap height and upper arm length are the largest at the maximal elbow angle of the maximal shoulder angle. There is a linear relationship between cap height and shoulder angle during arm movements; thus, in designing sleeves the cap height can be determined from the regression of cap height vs. shoulder angle.

• 대한전기학회논문지
• /
• 제41권9호
• /
• pp.1051-1059
• /
• 1992

In this paper, two general methods using time-series analysis in the functional separation of the myoelectric signal of human arm movements are developed. Autocorrelation, covariance method and sequential least squares algorithm were used to determine the model parameters and the order of signal model to describe six arm movement patterns` the forearm flexion and extension, the wrist pronation and supination, rotation-in and rotation-out. The confidence interval to classify the functions of arm movement was defined by the mean and standard deviation of total squared error. With the error signals of autoregressive(AR) model, the result showed that the highest success rate was obtained in the case of 4th order, and success rate was decreased with increase of order. Autocorrelation was the method of choice for better success rate. This technique might be applied to biomedical and rehabilitation engineering.