• Restorative Dentistry and Endodontics
• /
• v.45 no.2
• /
• pp.15.1-15.7
• /
• 2020

This clinical report describes designing and fabricating a single-retainer resin-bonded fixed dental prosthesis with a chair-side computer-aided design/computer-aided manufacturing system. The whole procedure, from tooth extraction to final placement of the prosthesis, was completed in one day, and a single clinic visit. No clinical complications were found at the 2-year follow-up after placement of the restoration, and satisfactory functional and esthetic results were achieved.

• The Korean Journal of Quaternary Research
• /
• v.23 no.1
• /
• pp.38-41
• /
• 2009

Results from the most recent decade of Mars' missions to Mars highlight a liquid water and water-ice sculpted landscape. Evidence includes layered sedimentary sequences with weathered outcrops, debris flows, fluvial valleys, alluvial fans, deltas, glacial and periglacial landscapes, and geochemical/mineralogical signatures of aqueous activity, including the formation of sulfates and clays, and the leaching and deposition of elements such as potassium, thorium,and iron. Such evidence indicates weathered zones and possible paleosols in stratigraphic sequences, transport of water and rock materials to sedimentary basins, and the possible formation of extensive transient lakes and possibly transient oceans on Mars. This new evidence is consistent with Viking-era geologic investigations that reported magmatic-driven flooding, ponding to form large water bodies in the northern plains, and transient (tens of thousand of years) hydrological cycles. It may even indicate aqueous activity at present. Both endogenic (magmatic driven) and exogenic (both impact cratering and changes in orbital parameters) have influenced paleohydrologic and environmental change on Mars. Abundance of water and dynamic activity would be decisively important for the possibility of past and present life on Mars.

• Nuclear Engineering and Technology
• /
• v.50 no.3
• /
• pp.478-487
• /
• 2018

Pyroprocessing technology has been regarded as a promising solution for recycling spent fuel in nuclear power plants. The Korea Atomic Energy Research Institute has been studying the current status of equipment and facilities for pyroprocessing and found that existing facilities are manually operated; therefore, their applications have been limited to laboratory scale because of low productivity and safety concerns. To extend the pyroprocessing technology to a commercial scale, the facility, including all the processing equipment and the material-handling devices, should be enhanced in view of automation. In an automated pyroprocessing facility, a supervised control system is needed to handle and manage material flow and associated operations. This article provides a preliminary design of the supervising system for pyroprocessing. In particular, a manufacturing execution system intended for an automated pyroprocessing facility, named Pyroprocessing Execution System, is proposed, by which the overall production process is automated via systematic collaboration with a planning system and a control system. Moreover, a simulation-based prototype system is presented to illustrate the operability of the proposed Pyroprocessing Execution System, and a simulation study to demonstrate the interoperability of the material-handling equipment with processing equipment is also provided.

• Journal of Microbiology
• /
• v.35 no.3
• /
• pp.206-212
• /
• 1997

Heliobacillus mobilis is a strictly anaerobic Gram-positive bacterium which contains a primitive Photosystem I-type reaction center. The membrane-bound cytochrome $C_{553}$ from the heliobacterium suggested to be the immediate electron donor to the photooxidized pigment (P798+) has been isolated and characterized. The heme protein was visualized as a major component with an apparent molecular size of 17kDa in TMBZ-staining analysis of the membrane preparation and showed characteristic $\alpha$ (552.5 nm), $\beta$ (522nm), and Soret absorption (416 nm) peaks of a typical reduced c-type cytochrome in the partially purified sample. The internal 43 amino acid sequence of the electron donor was obtained by chemical agent and protease treatments followed by N-terminal sequencing of the resulting fragments. The internal sequence carries lots of lysine residues and a Cys-X-X-Cys-His sequence motif which are the characteristics of typical c-type cytochromes. The analysis of the sequence by FAST or FASTA program, however, did not show any significant similarity to other known heme proteins.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.34 no.6
• /
• pp.419-427
• /
• 2014

Nonlinear features of ultrasonic waves are more sensitive to the presence of a fatigue crack than their linear counterparts are. For this reason, the use of nonlinear ultrasonic techniques to detect a fatigue crack at its early stage has been widely investigated. Of the different proposed techniques, laser nonlinear wave modulation spectroscopy (LNWMS) is unique because a pulse laser is used to exert a single broadband input and a noncontact measurement can be performed. Broadband excitation causes a nonlinear source to exhibit modulation at multiple spectral peaks owing to interactions among various input frequency components. A feature called maximum sideband peak count difference (MSPCD), which is extracted from the spectral plot, measures the degree of crack-induced material nonlinearity. First, the ratios of spectral peaks whose amplitudes are above a moving threshold to the total number of peaks are computed for spectral signals obtained from the pristine and the current state of a target structure. Then, the difference of these ratios are computed as a function of the moving threshold. Finally, the MSPCD is defined as the maximum difference between these ratios. The basic premise is that the MSPCD will increase as the nonlinearity of the material increases. This technique has been used successfully for localizing fatigue cracks in metallic plates.

• Applied Science and Convergence Technology
• /
• v.27 no.5
• /
• pp.109-112
• /
• 2018

Optical properties of InAs/GaAs submonolayer-quantum dot (SML-QD) have been investigated using excitation intensity ($I_{ex}$)- and temperature-dependent photoluminescence (PL). At a low temperature (13 K) strong PL was observed at 1.420 eV with a very narrow full-width at half maximum, of 7.09 meV. The results of the $I_{ex}$ dependence show that the PL intensities increase with increasing $I_{ex}$. The enhancement factors (k) of PL increment as a function of $I_{ex}$ are 3.3 and 1.22 at low and high $I_{ex}$ regime, respectively. The high k value at low $I_{ex}$, implies that the activation energy of the SML-QDs is low. The calculated activation energy of the SML-QDs from temperature dependence is 30 meV.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.423-423
• /
• 2017

수자원 계획 수립이나 관리를 위한 강우-유출 현상 해석에는 장기 유출 모형이 이용된다. 장기 유출 모형은 모형의 보정 과정이 요구되며, 유역별로 특성이 다르기 때문에 유역에 적합하게 매개변수를 보정하여야 한다. 모형의 매개변수를 추정하기 위해서는 주로 연속된 실측 유량자료가 필요하다. 하지만 일부 측정망에서는 일별 유출량 자료가 아닌 불연속적인 유량자료만을 획득할 수 있으며, 이러한 불연속적인 유량자료의 매개변수 보정의 적용에 관한 연구는 다소 미흡하게 진행되어 왔다. 따라서 본 연구에서는 수정 3단 TANK 모형을 대상으로 불연속적인 유량 자료를 이용하여 매개변수 최적화를 수행하고 모의결과를 비교 분석하여 성능을 평가하고자 한다. 유량자료는 국토교통부에서 측정하는 일별 유량자료를 이용하여 2일, 4일, 6일 8일, 10일, 15일 간격의 자료를 생성하여 적용하였으며, 최적화 기법으로는 SCE-UA(Shuffled Complex Evolution method developed at University of Arizona) 기법을 이용하였다. 본 연구의 결과는 수문 측정망의 운영에 있어 효율적 측정 주기 설정과 총량측정망 유량자료와 같은 불연속적 유량자료의 장기유출모형 최적화에 활용될 수 있을 것으로 기대된다.

• The korean journal of orthodontics
• /
• v.51 no.3
• /
• pp.217-227
• /
• 2021

Maxillary transverse deficiency often manifests as a posterior crossbite or edge-to-edge bite and anterior crowding. However, arbitrary arch expansion in mature patients has been considered to be challenging due to the possible periodontal adverse effects such as alveolar bone dehiscence and gingival recession. To overcome these limitations, nonsurgical maxillary expansion of the basal bone has been demonstrated in young adults. However, the age range for successful orthopedic expansion has remained a topic of debate, possibly due to the underlying individual variations in suture maturity. This case report illustrates nonsurgical, miniscrew-assisted rapid palatal expansion (MARPE) in a 60-year-old patient with maxillary transverse deficiency accompanied by anterior and posterior crossbites, crowding, and gingival recession. The use of MARPE allowed relief of crowding and correction of the crossbite without causing significant periodontal adverse effects.

• Journal of The Korean Astronomical Society
• /
• v.54 no.2
• /
• pp.71-88
• /
• 2021

We use N-body/hydrodynamic simulations to study the evolution of the spin of a Milky Way-like galaxy through interactions. We perform a controlled experiment of co-planar galaxy-galaxy encounters and study the evolution of disk spins of interacting galaxies. Specifically, we consider cases where the late-type target galaxy encounters an equally massive companion galaxy, which has either a late or an early-type morphology, with a closest approach distance of about 50 kpc, in prograde or retrograde sense. By examining the time change of the circular velocity of the disk material of the target galaxy from each case, we find that the target galaxy tends to lose the spin through prograde collisions but hardly through retrograde collisions, regardless of the companion galaxy type. The decrease of the spin results mainly from the deflection of the orbit of the disk material by tidal disruption. Although there is some disk material which gains the circular velocity through hydrodynamic as well as gravitational interactions or by transferring material from the companion galaxy, it turns out that the amount of the material is generally insufficient to increase the overall galactic spin under the conditions we set. We find that the spin angular momentum of the target galaxy disk decreases by 15-20% after a prograde collision. We conclude that the accumulated effects of galaxy-galaxy interactions will play an important role in determining the total angular momentum of late-type galaxies.

• Particle and aerosol research
• /
• v.14 no.4
• /
• pp.107-119
• /
• 2018

In this study, we have developed a real-time monitoring device for measuring PM10 and PM2.5 of ambient aerosol particles. The real-time PM monitor (SENTRY Dust Monitor) uses the optical scattering method and has 16 channels in particle size. The laboratory and field tests were carried out to evaluate the developed SENTRY Dust Monitor. Arizona Test Dust particles were used as test particles in the laboratory test and the field test was carried out at the Jongno-gu Observatory in Seoul. The measurements of PM10 and PM2.5 concentrations obtained by SENTTRY Dust Monitor were compared with Grimm Dust Monitor (Model 1.108) and a beta ray gauge. It was shown that the PM10 and PM2.5 concentrations obtained by SENTRY Dust Monitor agree well with that of the reference devices. Based on the results obtained in this study, it could be concluded that the SENTRY Dust Monitor can be used as a PM monitoring device for real-time monitoring of the ambient aerosols.