• 대한의용생체공학회:의공학회지
• /
• 제25권6호
• /
• pp.611-615
• /
• 2004

본 연구는 외부 전원 없이 광다이오드만을 이용하여 생성한 광전 자극을 통해 신경계를 효과적으로 자극하는 방법에 대한 것이다. 광을 통한 전류원 생성 및 전달은 생체 내에 집적된 광소자를 삽입하고 외부에서 광을 통해 신호와 전력을 전달을 한다. 이 기술은 특히 '눈' 이라는 광학적인 연결통로를 이용할 수 있는 인공망막과 같은 시스템에 매우 효과적이다. 그러나 광전 소자를 내부 전원 없이 구동시키는 경우, 광전류가 생체 저항에 직접적인 영향을 받게 되므로 자극에 충분한 전류를 생성할 수 없다. 무 전원 광다이오드를 통해 생성되는 광전류를 신경 자극에 적용하기 위해서는 생체 저항의 크기에 관계없이 활동 전위 생성에 충분한 전류 공급을 할 수 있는 안정된 전류원이 필요하다. 이를 위해서 본 연구에서는 병렬 저항을 도입하였다. 병렬 저항 추가 시 생체 저항을 포함한 전체 저항 값이 낮아지므로, 광원의 세기에 따라 최대의 광전류에 근접한 값을 얻을 수 있게 된다. 그러나 병렬 저항 값의 크기를 낮출수록 자극에 쓰이지 않는 전류량이 늘어나므로, 자극 전류량의 극대 값을 찾기 위해서는 병렬 저항 값의 최적화가 필요하다. 실험을 통해 측정된 실제 자극 전류량이 최대가 되는 병렬 저항 값의 범위는 500Ω∼700Ω 이고, 이때 전류량은 580uA∼860uA 이며 전류 효율은 47.5∼59.7%이었다. 자극의 크기와 빈1도를 변화시키면서 쥐의 좌골 신경을 자극하여 눈으로 확인 가능한 떨림 현상을 확인하였으며, 다채널 기록기를 이용해 활동 전위를 측정하였다. 이를 통해, 인공 망막에서의 광 자극 가능성을 확인할 수 있었다.

• Journal of Welding and Joining
• /
• 제27권3호
• /
• pp.92-96
• /
• 2009

Metallic sandwich plate has many good properties such as high specific stiffness, high specific strength, good impact absorptivity, effective thermal insulation and soundproofing. In our study, a new bonding method, 3-layer roll projection welding, is introduced to fabricate the metallic sandwich plate. The new method uses a pair of roll electrodes like the seam welding, and projection welding is made at two internal interfaces of the 3-layer weldment consisting of a structured inner sheet and a pair of skin sheets. During the welding process, skin sheet temperature are measured to produce metallic sandwich plate with uniform and good quality. But it is difficult to observe or measure the temperature at the welding points during welding process because the welding points exist at the internal interfaces. Therefore FEM numerical analysis using ABAQUS is conducted to estimate the generated heat at the welding points with different welding conditions.

• Corrosion Science and Technology
• /
• 제19권4호
• /
• pp.224-230
• /
• 2020

Stainless steel has excellent corrosion resistance. The drawback is that pitting occurs easily due to the concentration of chloride. In addition, corrosion of socket weld, which is structurally and chemically weaker than the other components of the pipe, occurs rapidly. Since these two phenomena overlap, pinhole leakage occurs frequently in the seawater pipe socket welds made of stainless steel at the power plants. To analyze this specific corrosion, a metallurgical analysis of the stainless steel socket welds, where the actual corrosion occurred during the power plant operation, was performed. The micro-structure and chemical composition of each socket weld were analyzed. In addition, selective corrosion of the specific micro-structure in a mixed dendrite structure comprising γ-austenite (gamma-phase iron) and δ-ferrite (iron at high temperature) was investigated based on the characteristic micro-morphology and chemical composition of the corroded area. Finally, the different corrosion stages and characteristics of socket weld corrosion are summarized.

• 한국전기전자재료학회논문지
• /
• 제37권2호
• /
• pp.208-214
• /
• 2024

This reports the electrical properties of single-crystal β-gallium oxide (β-Ga₂O₃) vertical Schottky barrier diodes (SBDs) with a different guard ring structure. The vertical Schottky barrier diodes (V-SBDs) were fabricated with two types guard ring structures, one is with metal deposited on the Al₂O₃ passivation layer (film guard ring: FGR) and the other is with vias formed in the Al₂O₃ passivation layer to allow the metal to contact the Ga₂O₃ surface (metal guard ring: MGR). The forward current values of FGR and MGR V-SBD are 955 mA and 666 mA at 9 V, respectively, and the specific on-resistance (R_on,sp) is 5.9 mΩ·cm² and 29 mΩ·cm². The series resistance (R_s) in the nonlinear section extracted using Cheung's formula was 6 Ω, 4.8 Ω for FGR V-SBD, 10.7 Ω, 6.7 Ω for MGR V-SBD, respectively, and the breakdown voltage was 528 V for FGR V-SBD and 358 V for MGR V-SBD. Degradation of electrical characteristics of the MGR V-SBD can be attributed to the increased reverse leakage current caused by the guard ring structure, and it is expected that the electrical performance can be improved by preventing premature leakage current when an appropriate reverse voltage is applied to the guard ring area. On the other hand, FGR V-SBD shows overall better electrical properties than MGR V-SBD because Al₂O₃ was widely deposited on the Ga₂O₃ surface, which prevent leakage current on the Ga₂O₃ surface.

• 한국수산과학회지
• /
• 제47권3호
• /
• pp.220-226
• /
• 2014

Sixty-seven Vibrio parahaemolyticus isolates from surface seawater from the Wando area, on the southern coast of Korea, were analyzed for their susceptibility to 15 different antimicrobials and the presence of virulence genes. According to the disk diffusion susceptibility test, all of the strains studied were resistant to ampicillin and oxacillin, while decreasing percentages were resistant to vancomycin (64.2%), streptomycin (56.7%), amikacin (31.3%), kanamycin (22.3%), cephalothin (20.9%), erythromycin (10.4%), ciprofloxacin (4.5%), and tetracycline (3.0%). All of the strains were susceptible to five antimicrobials: chloramphenicol, gentamycin, nalidixic acid, sulfamethoxazole/trimethoprim, and trimethoprim. Fifty-nine isolates (88.1%) were resistant to three or more classes of antimicrobial and defined as multidrug resistant, and two strains were resistant to seven antimicrobial agents. The minimum inhibitory concentration (MIC) of the 67 V. parahaemolyticus isolates to ampicillin and oxacillin ranged from 512-2,048 and $64-512{\mu}g/mL$, respectively. All 67 isolates were also examined for the presence of the tdh and trh virulence genes using the polymerase chain reaction (PCR). However, no isolates possessed either tdh or trh. The VPA0477 (${\beta}$-lactamase) gene, present in all of the tested strains, was validated as a new specific marker gene in PCR assays for the accurate detection and identification of V. parahaemolyticus.

• 한국의류산업학회지
• /
• 제22권6호
• /
• pp.862-872
• /
• 2020

This study explores the effects of facemasks on respiratory, thermoregulatory, cardiovascular responses during exercise on a treadmill and at rest. Five male subjects (25.8 ± 0.8 y, 171.8 ± 9.2 cm in height, 79.8 ± 28.1 kg in weight) participated in the following five experimental conditions: no mask, KF80, KF94, KF99, and N95. Inhalation resistance was ranked as KF80 < KF94 < N95 < KF99 and dead space inside a mask was ranked as KF80 = KF94 < N95 < KF99. The surface area covered by a mask was on average 1.1% of the total body surface area. The results showed no significant differences in body core temperature, oxygen consumption (VO2), carbon dioxide production (VCO2), heart rate or subjective perception among the five experimental conditions; however, cheek temperature, respiratory ventilation and blood pressure were greater for KF80 or KF94 conditions when compared to KF99 or N95 conditions (p<0.05). The differences among mask conditions are attributed to the dead space or specific designs (cup type vs pleats type) rather than the filtration level. In addition, the results suggest that improving mask design can help mitigate respiratory resistance from increased filtration.

• Composites Research
• /
• 제34권3호
• /
• pp.148-154
• /
• 2021

탄소/에폭시 복합재료 분리판(BP)은 높은 기계적 특성과 생산성으로 인해 바나듐 레독스 흐름전지(VRFB)의 기존 흑연 분리판을 대체할 가능성이 있는 BP이다. 다기능 구조인 탄소/에폭시 복합재료 BP는 계면접촉저항(ICR)을 줄이기 위해 흑연 코팅 또는 추가 표면 처리가 필요하다. 그러나 팽창 흑연 코팅은 VRFB 작동 조건에서 낮은 내구성을 가지며 별도의 표면 처리는 추가 비용이 발생한다는 단점이 있다. 본 연구에서는 폴리에스테르 직물을 적용하여 탄소/에폭시 복합재료 BP 표면의 잉여 수지층을 균일하게 제거하여 탄소섬유를 노출시키는 잉여 수지 흡수법을 개발하였다. 이 방법은 BP 표면에 탄소섬유를 노출하여 ICR을 감소시킬 뿐만 아니라 탄소 펠트 전극을 효과적으로 고정할 수 있는 고유한 도랑 패턴을 형성한다. 잉여 수지 흡수법에 의해 제작된 복합재료 BP의 산성 환경 내구성, 기계적 특성 및 기체 투과도에 대해 실험적으로 검증하였다.

• 신재생에너지
• /
• 제3권1호
• /
• pp.75-82
• /
• 2007

Aluminum was used as metallic bipolar plate material to reduce a stack weight. The functional materials such as conductive material, Au and nonconductive material, PTFE [polytetrafluoroethylene] were coated on the bipolar plate to enhance electrical contact and corrosion prevention in PEMFC. The active area of bipolar plate is divided into the top layer part that electric current mainly passes, and the bottom layer part that gas and water pass. The bottom layer part in the flow channel needs not to have electrical conductivity because it doesn't pass electric current directly. In this reason, Au on the top layer and PTFE on the bottom layer were coated to apply high electrical conductivity and/or good corrosion resistance. Although the single cell performance using Au-PTFE/Al bipolar plate was shown 78% in comparison with that of graphite, specific power of Au-PTFE/Al bipolar plate(0.4 W/g) was twice as much as graphite bipolar plate.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 Vol.19
• /
• pp.114-115
• /
• 2006

In the present study we investigated effects by changing binder contents m the carbon counter electrode for dye-sensitized solar cells. Binder contents changed for 6 wt%, 7 wt%, 8 wt% before making carbon electrode. In the result of the measurement the specific resistance for 6 wt% was lowest among others And the surface of the carbon electrode which was measured by SEM was best m the 6 wt"%. The electrode properties be showing in an experiment were due to increment of surface roughness that appeared the carbon electrode, which decreased internal surface area.

• 대한기계학회논문집B
• /
• 제32권12호
• /
• pp.963-969
• /
• 2008

The performance behavior of solid oxide fuel cell using $H_2$ and CO as fuels was investigated. The power densities and impedance results showed a little variation as the ratio of $H_2$ and CO changed. However, when the pure CO was used as a fuel, area specific resistance (ASR), especially low frequency region, was increased. This might be due to carbon deposition on anode. The maximum power density was 60% lower using CO than using $H_2$. Carbon deposition reduced after constant current was applied. The SOFC performance was recovered from the carbon deposition after applying constant current during 100h.