• Proceedings of the KSRS Conference
• /
• 1998.09a
• /
• pp.342-348
• /
• 1998

The purpose of this paper is to extract fast DEM (Digital Elevation Model) using satellite images. DEM extraction consists of three parts. First part is the modeling of satellite position and attitude, second part is the matching of two images to find corresponding poults of them and third part is to calculate the elevation of each point by using the result of the first and second part. The position and attitude modeling of satellite is processed by using GCPs. A area based matching method is used to find corresponding points between the stereo satellite images. In the DEM generation system, this procedure holds most of a processing time, therefore a new fast matching algorithm is proposed to reduce the time for matching. The elevation of each point is calculated using the exterior orientation obtained from modeling and disparity from matching. In this paper, the SPOT satellite images, level IA 6000 $\times$6000 panchromatic images are used to extract DEM. The experiment result shows the possibility of fast DEM. extraction with the satellite images.

• Proceedings of the IEEK Conference
• /
• 2007.07a
• /
• pp.313-314
• /
• 2007

In this paper, we suggest robust object extraction algorithm taking advantage of efficient Belief Propagation method. It does not get a disparity information because of uniform region and occlusion region etc. on initial depth map that use forward direction disparity information although is object area. Therefore, We run parallel backward disparity information and brightness information for certain object extraction.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.997-999
• /
• 2003

The effects of JPEG2000 compression on automated DSM extraction by using the area-based matching are evaluated in this paper. The influences on DSM heights obtained via PCI Geomatics OrthoEngine module are investigated using a single stereo model of 1:5,000 scale aerial photography at image resolution of 20 ${\mu}$m. The experiment design of elevation errors are computed for a range of compression rates from 2:1 to about 100:1, and the DSM which generated from uncompressed image is used as ‘ground truth’ data for comparison. The experimental results show that the standard deviation ranged from 0.9m to 2.5m with the compression ratio from 2 to 100. It is also observed that there is no significant degradation on DSM accuracy up to the compression ratio of 33.

• ETRI Journal
• /
• v.34 no.1
• /
• pp.87-97
• /
• 2012

This study presents an automatic matching method for generating a dense, accurate, and discontinuity-preserved digital surface model (DSM) using multiple images acquired by an aerial digital frame camera. The proposed method consists of two main procedures: area-based multi-image matching (AMIM) and stereo-pair epipolar line matching (SELM). AMIM evaluates the sum of the normalized cross correlation of corresponding image points from multiple images to determine the optimal height of an object point. A novel method is introduced for determining the search height range and incremental height, which are necessary for the vertical line locus used in the AMIM. This procedure also includes the means to select the best reference and target images for each strip so that multi-image matching can resolve the common problem over occlusion areas. The SELM extracts densely positioned distinct points along epipolar lines from the multiple images and generates a discontinuity-preserved DSM using geometric and radiometric constraints. The matched points derived by the AMIM are used as anchor points between overlapped images to find conjugate distinct points using epipolar geometry. The performance of the proposed method was evaluated for several different test areas, including urban areas.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 1997.06a
• /
• pp.131-136
• /
• 1997

We present a method to estimate a dense and sharp depth map using multiple cameras for the application to flexible video production. A key issue for obtaining sharp depth map is how to overcome the harmful influence of occlusion. Thus, we first propose to selectively use the depth information from multiple cameras. With a simple sort and discard technique, we resolve the occlusion problem considerably at a slight sacrifice of noise tolerance. However, boundary overreach of more textured area to less textured area at object boundaries still remains to be solved. We observed that the amount of boundary overreach is less than half the size of the matching window and, unlike usual stereo matching, the boundary overreach with the proposed occlusion-overcoming method shows very abrupt transition. Based on these observations, we propose a hierarchical estimation scheme that attempts to reduce boundary overreach such that edges of the depth map coincide with object boundaries on the one hand, and to reduce noisy estimates due to insufficient size of matching window on the other hand. We show the hierarchical method can produce a sharp depth map for a variety of images.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.19 no.1
• /
• pp.66-75
• /
• 2016

Stereoscopic image generated by depth image-based rendering(DIBR) for surveillance robot and camera is appropriate in a low bandwidth network. The image is very important data for the decision-making of a commander and thus its integrity has to be guaranteed. One of the methods used to detect manipulation is to check if the stereoscopic image is taken from the original camera. Sensor pattern noise(SPN) used widely for camera identification cannot be directly applied to a stereoscopic image due to the stereo warping in DIBR. To solve this problem, we find out a shifted object in the stereoscopic image and relocate the object to its orignal location in the center image. Then the similarity between SPNs extracted from the stereoscopic image and the original camera is measured only for the object area. Thus we can determine the source of the camera that was used.

• Journal of KIISE:Information Networking
• /
• v.33 no.2
• /
• pp.139-148
• /
• 2006

Recently with the advancement of local wireless communication technologies, digital trends of audio contents and devices are paving the way for new experiences to network-based audio streaming services. In this paper, we present the Wireless Audio Sharing (WASH) technology over Bluetooth and Wireless Local Area Network (WLAN). WASH system provides an audio sharing mechanism over multiple users and also provides stereo audio streaming between Bluetooth-enabled devices and Universal Plug and Play (UPnP) media devices connected to wired/wireless LANs. To achieve these, we extended the Bluetooth audio distribution profile and combined the extended profile with the UPnP AV architecture. With the implementation of this WASH technology, we show some experimental results of the stereo audio streaming in a real environment.

• Smart Media Journal
• /
• v.2 no.4
• /
• pp.27-33
• /
• 2013

Multi-view video system provides both realistic 3D feelings and free-view navigation. But it is hard to transmit too huge data, so we send only two or three view images and generate intermediate view image using depth information. In this paper, we propose high quality multi-view image generation method from stereoscopic images. Since the stereo matching method does not provide accurate disparity values for all the pixels, especially at the occlusion area, we propose an occlusion handling method using the background pixels at first. We also apply a joint bilateral filtering to enhance the disparity map at the object boundary since it can affect the quality of synthesized images significantly. Finally, we can generate virtual view images at intermediate view positions using confidence map to reduce bad pixel and hole's error. Experimental results show the proposed method performs better than the conventional method.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.7
• /
• pp.104-115
• /
• 1999

This paper proposes an efficient method for 3D modeling of a human face from trinocular images by reconstructing face surface using range data. By using a trinocular camera system, we mitigated the tradeoff between the occlusion problem and the range resolution limitation which is the critical limitation in binocular camera system. We also propose an MPC_MBS (Matching Pixel Count Multiple Baseline Stereo) area-based matching method to reduce boundary overreach phenomenon and to improve both of accuracy and precision in matching. In this method, the computing time can be reduced significantly by removing the redundancies. In the model generation sub-pixel accurate surface data are achieved by 2D interpolation of disparity values, and are sampled to make regular triangular meshes. The data size of the triangular mesh model can be controlled by merging the vertices that lie on the same plane within user defined error threshold.

• Korean Journal of Agricultural Science
• /
• v.47 no.2
• /
• pp.315-326
• /
• 2020

In this study, a real-time crop recognition system was developed for an unmanned farm machine for upland farming. The crop recognition system was developed based on a stereo camera, and an image processing framework was proposed that consists of disparity matching, localization of crop area, and estimation of crop height with coordinate transformations. The performance was evaluated by attaching the crop recognition system to a tractor for five representative crops (cabbage, potato, sesame, radish, and soybean). The test condition was set at 3 levels of distances to the crop (100, 150, and 200 cm) and 5 levels of camera height (42, 44, 46, 48, and 50 cm). The mean relative error (MRE) was used to compare the height between the measured and estimated results. As a result, the MRE of Chinese cabbage was the lowest at 1.70%, and the MRE of soybean was the highest at 4.97%. It is considered that the MRE of the crop which has more similar distribution lower. the results showed that all crop height was estimated with less than 5% MRE. The developed crop recognition system can be applied to various agricultural machinery which enhances the accuracy of crop detection and its performance in various illumination conditions.