• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 C
• /
• pp.1067-1069
• /
• 1999

This paper presents a network reduction using weak coupling method. Weak coupling method of identifying coherent generator groups are proposed. The partitioning technique used in this paper is based on a property of sparse matrix factorization. When a matrix has been factorized, a system is divided into study area, boundary buses and external area. A reduction process for external system starts with the load bus elimination and coherent generator aggregation. An identification of coherent generator group, network partitioning and network reduction are presented.

• 한국수자원학회논문집
• /
• 제51권1호
• /
• pp.61-70
• /
• 2018

본 연구에서는 댐의 효율적인 계획 및 운영을 위해 댐 저수지의 최적 퇴사위 결정 방법에 대해 고찰하였다. 현재 우리나라는 안전한 설계에 의거하여 댐 저수지 사수위 내의 퇴사위 결정 방법은 비교적 높게 산정되는 수평퇴사법을 주로 적용하고 있지만, 댐 저수지의 퇴사위는 정확하게 계획되어야 하며, 이는 댐 생애주기 평가 차원에서도 중요한 요소이다. 댐 저수지의 퇴사위 결정을 위해 대표적인 방법으로는 RMA-2와 연계된 SED-2D의 모형에 의한 방법, 수평퇴사법, 면적증분법(area increment method), 경험적면적감소법(empirical area reduction method)이 있다. 본 연구에서는 최적 퇴사위 결정을 위해 이를 산정하여 2007년 기준 실측 퇴사위와 비교하였다. 또한, 현재 및 미래 퇴사위를 예측하여 각 방법별로 경향과 추이를 분석하였다. 실측 퇴사위와 산정된 퇴사위를 비교한 결과, 경험적면적감소법이 실측값과 가장 근사하게 산정된 것을 확인할 수 있었으며, 현재 및 미래의 퇴사위는 전반적으로 과거 퇴사위의 경향과 추이를 따라가는 것으로 확인되었다. 따라서, 본 연구의 결과를 토대로 보면 경험적 면적감소법의 이용이 적절할 것으로 판단되고, 모형에 의해 분석 결과의 타당성을 검정하는 것이 합리적이라 생각된다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2001년도 추계학술대회 논문집
• /
• pp.162-165
• /
• 2001

In industrial practice, caliber design in shape rolling depends on the designer's experience, which in general is obtained through costly trial-and error process. on-line model which is relations of mean effective strain, roll force and area reduction is derived from finite element process simultion in bar rolling with three rolls.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2009년도 추계학술대회
• /
• pp.1053-1056
• /
• 2009

본 논문에서는 실내외 환경에서 상호 정보를 바탕으로 대상의 위치를 추적할 수 있는 영역축소 기법을 이용한 협력 위치추정 알고리즘을 제안하였다. 제안한 알고리즘은 고정노드의 수가 제한된 환경에서 미지의 노드 위치 정보를 활용한 상호 협력적인 위치추정 방식으로 본 연구에서는 3단계에 걸쳐 노드의 위치를 추정하였다. 실험 결과 동일한 개수의 RN일 때 BN의 수가 증가할수록 본 논문에서 제안한 영역축소 방법을 이용한 협력위치추정의 정밀도가 향상됨을 확인하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.175-180
• /
• 2007

This paper presents a case study on blasting vibration reduction in NATM(New Australian Tunnelling Method) tunnel construction carried out under a congested residential area. In NATM tunnel constructions, blasting is an essential process, thus vibration phenomenon is inevitable. Therefore, the vibration reduction was tried to avoid expected complaints from the public living in the area. Test blastings were performed to get the constants for an estimation formula of vibration velocity. Then the influence area was approximated using the estimation formula, and construction methods for the vibration reduction were sought based on the results.

• 치과방사선
• /
• 제27권2호
• /
• pp.15-25
• /
• 1997

This study was performed to prepare the quantitative method of judging the sensitive prognosis of chronic apical periodontitis as early as possible. The subjects were 25 cases with periapical radiolucencies of which were treated with endodontic treatment. Serial radiographs were taken by standardized method longitudinally. The density slice function of digital radiographic system were employed for quantitative and longitudinal assessment of the radiolucent area and the condensing osteitis simultaneously. Obtained results were as follows: 1. The amount of bone repair after endodontic treatment could be detected quantitatively by the density slice function of digital radiographic system. 2. Within the 6-week period after root canal filling, the prognosis could be evaluated by assessment both radiolucent area and condensing osteitis on digital radiographic system. 3. The pattern of bone repair showed peripheral type in most cases from the 6th week after root canal filling. 4. In longitudinal change, bone repair showed two patterns; the succeeding reduction of radiolucent area showing the increase of condensing osteitis in size till 6th week and following by static state or reduction tendency and the reduction following the initial increase of both areas. 5. Cases with pulpitis by trauma showed initial increase of condensing osteitis at 2nd week, marked reduction of radiolucent area and condensing osteitis at 6th week, and approximately normal bone state at 8th week after root canal filling.

• 대한전자공학회논문지SD
• /
• 제48권3호
• /
• pp.42-47
• /
• 2011

제곱기의 부분곱 행렬은 대칭이므로 부분곱을 폴딩(folding), 쉬프트, 재배열하여 부분곱 행렬의 높이를 줄일 수 있다. 본 논문에서는 기존 제곱기와 비교하여 효율적인 제곱기의 설계 방법을 제안한다. 또한, 제안한 제곱기에 대해 고정길이 제곱기의 설계 방법을 제안한다. 시뮬레이션을 통해 제안한 제곱기는 기존 제곱기와 비교하여 면적은 약 17%, 지연시간(propagated delay time)은 약 10%, 전력소모는 약 10%까지 감소시킬 수 있음을 보인다. 제안한 고정길이 제곱기는 기존 고정길이 제곱기와 비교하여 절대오차와 평균오차의 성능비교에서 우수하면서, 일반 제곱기(full-width)와 비교하여 면적, 지연시간, 전력소모를 각각 30%, 16%, 28%까지 감소시킬 수 있음을 보인다.

• 한국환경과학회지
• /
• 제28권11호
• /
• pp.1027-1032
• /
• 2019

This study aimed to analyze the prioritized area for the functional change of agricultural reservoir according to the rapid urbanization and social changes through the mapping method. Changwon-si, Gimhae-si, and Jinju-si in Gyeongnam province were selected as the study area, considering the results of land-use and cluster analysis. As the planning unit of management area, watershed was used and land coverage map from 1975 to 2015 were analyzed for changes of land use. The reduction ratio (%) of farmland was calculated for identifying the changes in 2013 compared to 1975. As a result, the reduction ratio was 11.9% for Changwon-si, 12.2% for Gimhae-si and 9.3% for Jinju-si, and the number of watershed having functionally reduced potential-area was relatively high in the proportion to the city size.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 봄 학술발표회 논문집
• /
• pp.643-650
• /
• 2002

The large planar failure has occurred in a rock cut slope of highway construction site in Boeun. This area is considered as unstable since the discontinuities whose orientations are similar to the orientation of the failure plane, are observed in many areas. Therefore, several analysis techniques such as SMR, stereographic analysis, limit equilibrium, numerical analysis, which are commonly used in rock slope stability analysis, are adopted in this area. In order to analyze the stress redistribution and nonlinear displacement caused by cut, which are not obtained in limit equilibrium method, the UDEC and shear strength reduction technique were used in this study Then the factors of safety evaluated by shear strength reduction technique and limit equilibrium were compared. In addition, the factor of safety under fully saturated slope condition was calculated and subsequently, the effect of the reinforcement was evaluated.

• 한국물환경학회지
• /
• 제24권2호
• /
• pp.180-184
• /
• 2008

A distributed hydrologic model of an urban drainage area on Bugok drainage area in Oncheon stream was developed and combined with a optimization method to determine the optimal location and number of best management practices (BMPs) for storm water runoff reduction. This model is based on the SCS-CN method and integrated with a distributed hydrologic network model of the drainage area using system of 4,211 hydrologic response units (HRUs). Optimal location is found by locating HRU combination that leads to a maximum reduction in peak flow at the drainage outlet in this model. The results of this study indicate the optimal locations and numbers of BMPs, however, for more exact application of this model, project cost and SCS-CN reduction rate of structural facilities such infiltration trench and pervious pavement will have to be considered.