• Title/Summary/Keyword: Area ratio method

Search Result 1,940, Processing Time 0.03 seconds

An Expert Opinion Analysis Study for Improvement of Biotop Area Ratio Index (생태면적률 산정지표 개선방안을 위한 전문가 의견분석 연구)

  • Byeong-Hwa, Song
    • Journal of Environmental Impact Assessment
    • /
    • v.31 no.6
    • /
    • pp.438-448
    • /
    • 2022
  • This study is to improve the quantitative estimation index of biotop area ratio, which is an environmental planning index and environmental ecological planning technique, as a planning means that can induce the improvement of ecological soundness in the spatial planning stage. It is intended to identify the relative importance of space types and calculation indicators currently in operation, and to find alternatives through opinion analysis on improvement of space types and weights. As the method of this study, AHP analysis was performed to evaluate the relative importance of spatial types for in-depth analysis of spatial types and calculation indicators. In order to secure the reliability and objectivity of the study, 50 experts participated. Through this study, it can be linked with the improvement of technologies and construction methods, maintenance efficiency, economic feasibility, and construction technology, which are developed through analysis on the limitations and improvements by type of biotop area ratio. And it is expected to contribute to the improvement of the urban environment and vitalization of the biotop area ratio through the application of the biotop area ratio.

Area-Optimization for VLSI by CAD (CAD에 의한 VLSI 설계를 위한 면적 최적화)

  • Yi, Cheon-Hee
    • Journal of the Korean Institute of Telematics and Electronics
    • /
    • v.24 no.4
    • /
    • pp.708-712
    • /
    • 1987
  • This paper deals with minimizing layout area of VLSI design. A long wire in a VLSI layout causes delay which can be reduced by using a driver. There can be significant area increase when many drivers are introduced in a layout. This paper describes a method to obtain tight bound on the worst-case increase in area when drivers are introduced along many long wires in a layout. The area occupied by minimum-area embedding for a circuit can depend on the aspect ratio of the bounding rectangle of the layout. This paper presents a separator-based area optimal embeddings for VLSI graphs in rectangles of several aspect ratios.

  • PDF

Assessing landslide susceptibility along the Halong - Vandon expressway in Quang Ninh province, Vietnam: A comprehensive approach integrating GIS and various methods

  • Nguyen-Vu Luat;Tuan-Nghia Do;Lan Chau Nguyen;Nguyen Trung Kien
    • Geomechanics and Engineering
    • /
    • v.37 no.2
    • /
    • pp.135-147
    • /
    • 2024
  • A GIS-based landslide susceptibility mapping (LSM) was carried out using frequency ratio (FR), modified frequency ratio (M-FR), analytic hierarchy process (AHP), and modified analytic hierarchy process (M-AHP) methods to identify and delineate the potential failure zones along the Halong - Vandon expressway. The thematic layers of various landslide causative factors were generated for modeling in GIS, including geology, rainfall, distance to fault, distance to road, slope, aspect, landuse, density of landslide, vertical relief, and horizontal relief. In addition, a landslide inventory along the road network was prepared using data provided by the management department during the course of construction and operation from 2017 to 2019, when many landslides were documented. The validation results showed that the M-FR method had the highest AUC value (AUC = 0.971), which was followed by the FR method with AUC = 0.961. The AUC values were 0.939 and 0.892 for the M-AHP and AHP methods, respectively. The generated LSM obtained from M-FR method classified the study area into five susceptibility classes: very low (0), low (0-1), moderate (1-2), high (2-3), and very high (3-4) classes, which could be useful for various stakeholders like planners, engineers, designers, and local public for future construction and maintenance in the study area.

Mapping of Functionally Reduced Potential Area for Improving Utilization of Agricultural Reservoir in Terms of Environmental Planning (환경생태계획 측면에서 농업용저수지 활용성 제고를 위한 기능저하 잠재지역 맵핑 연구)

  • Yeum, Jung-Hun
    • Journal of Environmental Science International
    • /
    • v.28 no.11
    • /
    • pp.1027-1032
    • /
    • 2019
  • This study aimed to analyze the prioritized area for the functional change of agricultural reservoir according to the rapid urbanization and social changes through the mapping method. Changwon-si, Gimhae-si, and Jinju-si in Gyeongnam province were selected as the study area, considering the results of land-use and cluster analysis. As the planning unit of management area, watershed was used and land coverage map from 1975 to 2015 were analyzed for changes of land use. The reduction ratio (%) of farmland was calculated for identifying the changes in 2013 compared to 1975. As a result, the reduction ratio was 11.9% for Changwon-si, 12.2% for Gimhae-si and 9.3% for Jinju-si, and the number of watershed having functionally reduced potential-area was relatively high in the proportion to the city size.

Overshadowing Analysis of Apartment Building Arrangement with a Average Shading Ratio (음영면적비를 이용한 공동주택의 단위세대별 일조환경 평가연구)

  • Yoon, Jong-Ho;Yeo, Seung-Ki;Park, Jae-Sung;Lee, Si-Woong;Chin, Kyung-Il
    • KIEAE Journal
    • /
    • v.6 no.2
    • /
    • pp.35-42
    • /
    • 2006
  • This study is to investigate the possibility of a quantitative analysis on sunshine right in apartment houses with a new evaluation index of shading area ratio(SAR) which represents seasonal average value of shaded portion of a window during definite period. SAR values of each apartment houses in a prototype building was calculated depending on apartment building arrangement types and orientations. Since the new method proposed in this research is able to measure the sunshine possibility of the each house in detail, which is more precise and descriptive than the existing method of sunshine judgment standard based on the sunshine hours only at winter solstice, it can be appropriately utilized as a highly qualified sunshine right judgment measures in apartment buildings.

Evaluation of the Low Replacement Reinforced Ground Using Laboratory Tests (실내시험을 이용한 저치환 보강지반의 평가)

  • Bae, Woo-Seok
    • Journal of the Korean Society of Safety
    • /
    • v.23 no.6
    • /
    • pp.131-137
    • /
    • 2008
  • SCP(Sand Compaction Pile) method that forms a composite ground by driving compacted sand piles into the soft ground. This method is one of the soil improvement techniques for reinforcing and strengthening soft ground deposits. This thesis describes the investigation on the behavior of soft ground reinforced with SCP by low improvement ratio. Direct shear test and consolidation test carried out to verified behavior of composite ground reinforced with SCP. Test results were discussed with reference to the amount of consolidation settlement, variation of shear resistance with area replacement ratio and effect of the stress concentration. And, laboratory model loading test carried out to verified the effect of the location and failure mode of reinforced embankment. Residual shear strength varies with the area replacement and constrict load in the low replacement ratio. Calculated stress concentration ratio overestimate than proposed valve by experimental, theoretical and analytical method. As regards the location, improving right below of the top of the slope was more effective than below of the toe of the slope. This thesis carried out to obtain fundamental information of behavior of the composit ground. Hereafter, centrifuge test that reproduce stress state of the in-situ must be necessary through the further study about pile penetration, reinforce position and construct time.

A Comparisonal Anlaysis among the Processes of Gear Blank (기어 블랭크 성형공정의 비교 해석)

  • 최호준;김장군;황병복
    • Proceedings of the Korean Society for Technology of Plasticity Conference
    • /
    • 1996.10a
    • /
    • pp.174-184
    • /
    • 1996
  • Two methods for cold extrusion processes to produce an axisymmetric steel gear blank are investigated for comparing each other. The "classical" forming method consisting of four operations is selected first to be simulated using the rigid-plastic finite element method and uses single-die presses. The other using a fully automated transfer headers can produce the final part without interannealing. The final products must be checked at the design criteria such as area reduction, the extrusion ratio and punch diameter to depth ratio, especially punch buckling by simulations. FEM analysis is performed mainly for strain distribution, both process sequences are proved to have proper charicteristics suitable for each production method in terms of maximum load. Those simulation results will provide good design criteria in the future work to advance the manufacturing process.

  • PDF

A Study on the Characteristics of Flows around Building Groups Using a CFD Model (CFD 모델을 이용한 건물군 주변의 흐름 특성 연구)

  • Lee, Hankyung;Kim, Jae-Jin;Lee, Young-Gon
    • Atmosphere
    • /
    • v.25 no.3
    • /
    • pp.501-510
    • /
    • 2015
  • In this study, the characteristics of flows around building groups are investigated using a computational fluid dynamics (CFD) model. For this, building groups with different volumetric ratios in a fixed area are considered. As the volumetric ratio of the building group increases, the region affected by the building group is widened. However, the wind-speed reduced area rather decreases with the volumetric ratio near the ground bottom (z ${\lesssim}$ 0.7H, here, H is the height of the building group) and, above 0.7H, it increases. As the volumetric ratio decreases (that is, space between buildings was widened), the size of recirculation region decreases but flow recovery is delayed, resulting in the wider wind-speed reduced area. The increase in the volumetric ratio results in larger drag force on the flow above the roof level, consequently reducing wind speed above the roof level. However, above z ${\gtrsim}$ 1.7H, wind speed increases with the volumetric ratio for satisfying mass conservation, resultantly increasing turbulent kinetic energy there. Inside the building groups, wind speed decreased with the volumetric ratio and averaged wind speed is parameterized in terms of the volumetric ratio and background flow speed. The parameterization method is applied to producing averaged wind speed for 80 urban areas in 7 cities in Korea, showing relatively good performance.

A Study on the Change of Paradigm and Analysis of Qualitative Space in Public Space - Focused on the Entrance Floor in General Hospital over 500 beds in Korea - (공용 공간의 패러다임 변화와 질적 공간 분석 - 500병상 이상 국내 종합병원 진입층을 중심으로 -)

  • Son, Ji-Hye;Yang, Nae-Won
    • Korean Institute of Interior Design Journal
    • /
    • v.23 no.6
    • /
    • pp.212-220
    • /
    • 2014
  • Entrance floor in hospital has became important space for medical service in holistic perspective and image enhancement. However, basically a discussion of the qualitative properties and the role of public space is paucity in change of public spaces paradigm. In accordance with this problem, this study consider the change of paradigm in public space based on earlier studies and create classification criterion of space. According to the criterion, G/D ratio and the qualitative spatial area ratio of 26 general hospitals which were planned over 500 beds are analyzed by case study method. The conclusion of this study is as follows. 1) The space according to the medical function is variable element. So the public space should be planned from function-subordinate space to self-reliance space in the future. 2) There is no correlation between the high G/D ratio and the high ratio of qualitative spacial area. In other word It's hard to say that the public space which G/D ratio is high is qualitative space. 3) Since 2000, various types in accordance with the circulation system is applied to public space. And ratio of qualitative spacial area is relatively high in the street type and the concourse type. 4) The qualitative spatial area ratio of stay space is higher than passage's one.

A Study on Nutritional Intakes in Elderly People in Wando Area (완도지역 성인 및 노인의 영양소 섭취 실태조사)

  • Cha, Bok-Kyeong
    • Korean Journal of Community Nutrition
    • /
    • v.10 no.6
    • /
    • pp.880-891
    • /
    • 2005
  • The purpose of this study was to investigate nutrients intakes and nutritional quality of Adults and Elderly People in an island area (Wando). A three-day dietary intakes survey, using a 24 hour recall method was obtained from 187 subjects aged 46 to 84 (mean age 65.3) living in an island area (Wando). Nutient intakes were analyzed using CAN-Pro soft program and compared to Korean RDA. The quality of nutrients was assessed by analyzing nutrient adequacy ratio (NAR), mean adequacy ratio (MAR), and index of nutritional quality (INQ). The average daily mean energy intakes were 1869.0 kcal for males and 1943.9 kcal for females, respectively. Daily intakes of protein for males and females were 28.0 and 30.4 g and those of fat were 31.5 and 28.51 g, respectively. Nutrient consumed below $75\%$ of Korean RDA was protein, vitamin A, Ca and Zn in both males and females. Average CPF ratio of males and females were 78.8 : 6.0 : 15.1 and 80.0 : 6.4 13.4, respectively. Energy intake ratio from protein was significantly higher in over 60 years males. Carbohydrate dependency decreased with age. Protein dependency increased with age. Nutrient adequacy ratio (NAR) of energy, protein vitamin A and vitamin E were increased with age in males. The mean adequacy ratio (MAR), an index of overall dietary quality, were not significantly different by age group. Average MAR for males and females was 0.77 and 0.78, respectively. The index of nutritional quality (INQ) showed the tendency to decrease with age. Especially, there were significantly decreases in INQ of all nutrients, except protein, with age. Based on these results, it is evident that people in the island area did not consume enough nutrients. Specially, dietary intake of protein, vitamin A, vitamin E, and Ca were not adequate. (Korean J Community Nutrition 10(6) : $880\∼891$, 2005)