• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.43 no.3
• /
• pp.363-370
• /
• 2023

Due to the spread of COVID-19, the use of public transportation such as urban railroads has changed significantly since the beginning of 2020. Therefore, in this study, daily time series data for each urban railway station were collected for three years before COVID-19 and after the spread of COVID-19, and the similarity of time series analysis was evaluated through DTW (Dynamic Time Warping) distance method to derive regression centers for each cluster, and the effect of various external events such as COVID-19 on changes in the number of users was diagnosed as a time series impact detection function. In addition, the characteristics of use by cluster of urban railway stations were analyzed, and the change in passenger volume due to external shocks was identified. The purpose was to review measures for the maintenance and recovery of usage in the event of re-proliferation of COVID-19.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.1309-1314
• /
• 2011

People spend approximately 80 ~ 90 % of their time in various kinds of indoor spaces. And, in metropolitan area, most people spend more than 1 hour in public transportation everyday. For this reason, people's interest in the indoor air quality is drastically increasing. Among various indoor air pollutants, $CO_2$ is one of the most severe environmental concerns. Ventilation is commonly used to keep low $CO_2$ concentration in the passenger cabin. However, ventilation may worse the indoor air quality problem in case of subway because the tunnel is seriously polluted by particulate matters. In this study, an alternative way to remove $CO_2$ was suggested. The adsorption of $CO_2$ by $CO_2$ adsorbent was studied. Zeolite modified with base was prepared, and $CO_2$ removal performance was tested in $4m^3$ and $24m^3$ environmental chambers. It was found that $CO_2$ adsorbent could effectively remove $CO_2$ in the chambers.

• Journal of Korean Society for Quality Management
• /
• v.45 no.1
• /
• pp.65-92
• /
• 2017

Purpose: The performance of global major airports is evaluated and several research questions are examined relative to the measures characterizing airport performance. Methods: The two-stage internal structure of airport performance is considered by decomposing it into physical operations and revenue generation. In the physical operations stage, operating costs, number of runways, terminal area and number of employees are used as inputs, while passenger throughput, cargo throughput and aircraft movements are taken as outputs. Subsequently, in the revenue generation stage, the outputs from the preceding stage are taken as inputs, while revenue is used as output. Results: Based upon this two-stage modeling of airport performance, a multiplicative two-stage network data envelopment analysis model is employed to calculate the overall and stage efficiencies of 59 airports using the recent data in the 2014 Airport Benchmarking Report published by the Air Transport Research Society. Several internal and external factors are also considered such as airport size, airport geographical location, proportion of international passengers, ownership (listed or not) and management style, and statistical analysis is performed to examine their impacts on airport performance. Conclusion: It is shown that the airports exhibit statistically significant difference across regions, and also some statistically significant factors affecting airport performance are identified.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.6 no.4
• /
• pp.76-85
• /
• 1998

Recently, Genetic Algorithm(GA) is widely adopted into a search procedure for structural optimization, which is a stochastic direct search strategy that mimics the process of genetic evolution. This methods consist of three genetics operations maned selection, crossover and mutation. Contrast to traditional optimal design techniques which use design sensitivity analysis results, GA, being zero-order method, is very simple. So, they can be easily applicable to wide area of design optimization problems. Also, owing to multi-point search procedure, they have higher probability of converge to global optimum compared to traditional techniques which take one-point search method. In this study, a method of finding the optimum values of suspension parameters is proposed by using the GA. And vehicle is modelled as planar vehicle having 5 degree-of-freedom. The generalized coordinates are vertical motion of passenger seat, sprung mass and front and rear unsprung mass and rotate(pitch) motion of sprung mass. For rapid converge and precluding local optimum, share function which distribute chromosomes over design bound is introduced. Elitist survival model, remainder stochastic sampling without replacement method, multi-point crossover method are adopted. In the sight of the improvement of ride comfort, good result can be obtained in 5-D.O.F. vehicle model by using GA.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.10 no.5
• /
• pp.168-173
• /
• 2002

The durability test, along with the crashworthiness test, requires the most time and expense in the vehicle development process. The durability design using CAE tools reduces the time required for both the durability test and actual vehicle production. Existing dynamic stress analyses designed fir the analysis of vehicle fatigue mainly calculate the dynamic stress history and fatigue after performing dynamic analysis and stress analysis with relevant software applications and then superpositioning the dynamic load history and stress influence coefficient at each joint. This approach is a complex process, taking into account the flexibility of the parts. It is, however, incapable of giving accurate consideration to the contacts between components, the non-linearity of materials, and tire-road surface interactions. This approach also requires that the analysts have an expertise in software applications of various kinds or an expert in each area must perform the analysis. This requires as a great deal of manpower and time. In order to complement the existing approaches for dynamic stress analysis, this study aims at the following: (1) to suggest the simple and accurate analysis technique which is capable of producing all the possible necessary results; (2) to reduce dramatically the time and manpower needed to construct a model designed to analyze dynamics, quasi-static stress, and fatigue; and (3) to enable an accurate analysis of fatigue by improving the accuracy of dynamic stress. we verify the presented analysis method through durability evaluation of the knuckle of passenger car.

• The Korean Journal of Emergency Medical Services
• /
• v.27 no.2
• /
• pp.51-63
• /
• 2023

Purpose: The study aimed to analyze the occurrence and transfer status of emergency patients at Incheon International Airport in Korea. Methods: This study design included 810 patients for eight years, from July 1, 2014 to June 31, 2022. The collected data were analyzed with SPSS statistics version 25.0. Results: For the demographics, 531 (65.6%) were males, 151 (19.5%) were in the highest age group (in their 50s), and 289 (35.9%) were foreigners. The most common place of occurrence was in protected areas in the passenger terminal, with 341 (42.1%) of cases occurring here. The time of arrival at the site (z=-3.444, p=.001), stay duration at the site (z=-8.145, p=. 001), and transfer time (z=-3.623, p=.000) were all significantly longer. Conclusion: It is necessary to consider a rapid emergency transportation plan, such as developing a system that simplifies immigration procedures when emergency patients move from protected areas to general areas. Moreover, in order to quickly respond to foreign emergency patients, detailed characteristics will need to be identified. Lastly, considering the long transfer time, an instructing doctor should accompany an ambulance and actively perform advanced resuscitation.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.1
• /
• pp.25-28
• /
• 2015

Lifts are used as an essential means of transportation within the building in an emergency situation, when used as a means of escape, so expect a lot of research has been conducted high effect. Number of stories in the Seoul-rise building guidelines underground 7th floor, 53 ground floor, floor area $6,800m^2$, floor area $127,050m^2$, use is cultural and convention facilities and sales facilities, business facilities and accommodation (hotel), the construction of public housing (apartments) hagieneun not efficient to install elevators for evacuation mothada was determined separately in designing the lift is designed according to the standards of passenger lifts installed under a judgment as to use for evacuation. However, this does not include detailed design guidelines so far.[1] We propose the Evacuee Guidance of Elevator System that can be used as entering air equipment, sprinkler and smart phone evacuation system.

• Journal of Korean Society of Transportation
• /
• v.33 no.3
• /
• pp.304-314
• /
• 2015

Detour of metro (subway) in metropolitan area has been regarded as one of inherent elements that make entire metro system less competitive than passenger cars. However, factors affecting detour of metro line is not specified clearly when a new subway system is planned or an existing system is improved. Previous detour-related studies was reviewed for developing 'distance efficeincy evaluation model' for metro as well as its counterpart (i.e. road). Metro line 3 (orange line) of Seoul metropolitan area was applied as a case study. As a results, the most detoured OD segment is Daechi - Apgujeong and its detour factor is 1.93 which means that the distance of the metro is 1.93 times longer distance compared to the distance of the road. The metro line 3 has averagely 20% longer distance compared to road for the identical O/D pairs.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.47 no.4
• /
• pp.428-434
• /
• 2011

To establish a vessel safety management system for improving the safety of vessel's traffic and preventing vessel's traffic accidents, the state of marine traffic in the Busan South Port was investigated and analyzed as preliminary survey of the countermeasures. As a result of the study, there are 1,158 vessels in a day, 48 vessels in an hour, and the maximum traffic is about 118 vessels between 16:00 and 17:00 hours everyday, which requires to establish and operate a traffic control system necessarily for ensuring vessel's traffic safety. Furthermore, passages of tanker, passenger ship, cargo vessel and government vessel showed to sail along main traffic lane to be obtained enough sea depth at the survey area. However, passages of fishing vessel and launch showed to sail freely at all survey area owing to outstanding maneuverability and a shallow draft. Some vessels of launch sailed along main traffic lane, but other vessels crossed to sail it. The passages to cross main traffic lane is higher the risk of collision. Therefore, safety measures are urgently needed for the operation of the Busan South Port management system and the prevention of marine pollution.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.24 no.3
• /
• pp.281-292
• /
• 2014

Objectives: The aim of this case study is to verify the chemical exposure reductions for various chemicals by substituting the ingredients of raw materials in a polyurethane(PU) foaming industry. The PU foaming process was making various passenger car seats from chemicals such as toluene diisocinate(TDI), methylene bisphenyl isocyanate(MDI) and polyols. Methods: Basic process data and workers' health effects could be gathered by interviewing managers and reviewing previous exposure monitoring data. Amine, aldehyde and isocyanate chemicals were analyzed following the NIOSH-NMAM. Area sampling methods rather than personal sampling were introduced for this field investigation. Results: Two amines, triethylene diamine(TEDA) and N,N,N',N'-Tetramethyl-1,6- hexanediamine(TMHDA) were identified in raw polyol, cured PU foam and air. The average concentrations of TEDA and TMHDA showd less than 1 ppm by area sampling; however, that caused halovision among workers in PU-PAD process. Aldehydes and isocyanates were detected in the air while the concentrations were relatively low compare to occupational exposure limits. Successful raw material substitution from nonreactive amine to reactive amine could reduces air-borne amine and aldehyde levels by about 70%. Halovision had been disappeared successfully in the process. Conclusions: Several amines caused halovision among workers in PU-PAD process, especially during summer season in spite of relatively low levels. Combination of reactive amines into urethane foam could reduced vapor generation into air, which resulted in the elimination of eye troubles in the process.