• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.420.1-420.1
• /
• 2016

Colloidal quantum dot (CQD) is emerging as a promising active material for next-generation solar cell applications because of its inexpensive and solution-processable characteristics as well as unique properties such as a tunable band-gap due to the quantum-size effect and multiple exciton generation. However, the most widely used spin-coating method for the formation of the quantum dot (QD) active layers is generally hard to be adopted for high productivity and large-area process. Instead, the spray-coating technique may potentially be utilized for high-throughput production of the CQD solar cells (CQDSCs) because it can be adapted to continuous process and large-area deposition on various substrates although the cell efficiency is still lower than that of the devices fabricated with spin-coating method. In this work, we observed that the subsequent treatment of two different ligands, halide ion and butanedithiol, on the lead sulfide (PbS) QD layer significantly enhanced the cell efficiency of the spray CQDSCs. The maximum power conversion efficiency was 5.3%, comparable to that of the spin-coating CQDSCs.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제4권3호
• /
• pp.205-223
• /
• 2010

In this paper, we analyze the impact of different frame types on self-similarity and burstiness characteristics of the aggregated frame traffic from a real 802.11 wireless local area network. We find that characteristics of aggregated frame traffic are affected by both mean frame size and the proportion of specified frame types. Based on this new knowledge, an adaptative frame size optimization (AFSO) mechanism is proposed to improve the transmission efficiency by adaptively adjusting data frame size according to the proportions of different frame types. Simulation results show that our proposed mechanism can effectively regulate the burstiness of aggregated frame traffic and improve the successful delivery rate of data frames when a fixed throughput target is set for 802.11 wireless networks.

• 한국정보통신학회논문지
• /
• 제19권4호
• /
• pp.888-894
• /
• 2015

국가보안기술연구소(NSRI)에서 개발된 경량 블록암호 알고리듬 LEA(Lightweight Encryption Algorithm)의 효율적인 하드웨어 설계에 대해 기술한다. 마스터키 길이 128비트를 지원하도록 설계되었으며, 라운드 변환블록과 키 스케줄러의 암호화 연산과 복호화 연산을 위한 하드웨어 자원이 공유되도록 설계하여 저전력, 저면적 구현을 실현했다. 설계된 LEA 프로세서는 FPGA 구현을 통해 하드웨어 동작을 검증하였다. Xilinx ISE를 이용한 합성결과 LEA 코어는 1,498 슬라이스로 구현되었으며, 135.15 MHz로 동작하여 216.24 Mbps의 성능을 갖는 것으로 평가 되었다.

• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2007년도 추계 종합학술대회 논문집
• /
• pp.130-134
• /
• 2007

IEEE 802.11 WLAN(Wireless Local Area Network)의 MAC계층의 DCF(Distributed Coordination Function)는 각 스테이션이 동시에 매체 접속을 시도하여 발생하는 충돌을 해결하기 위하여 CSMA/CA(Carrier Sense Multiple Access with Collision Avoidance) 알고리즘을 이용한다. 하지만 DCF는 스테이션의 수가 증가함에 따라 성능이 저하되는 단점이 있다. 본 논문에서는 이러한 스테이션 수의 증가에 따른 혼잡상황에서 성능이 개선된 알고리즘을 제안하고, 기본 알고리즘과 DCF+ 알고리즘, 그리고 제안된 알고리즘을 시뮬레이션 도구인 NS-2(Network Simulator-2)를 이용하여 포화수율, 지연시간, 충돌율, 드랍율의 관점에서 비교분석하였다.

• 한국정보과학회논문지:정보통신
• /
• 제27권1호
• /
• pp.22-29
• /
• 2000

본 논문에서는 유럽의 ETSI(European Telecommunication Standards Institute)에서 표준화를 진행 중에 있는 유럽형 고속 무선 근거리 통신망인 HIPERLAN(HIgh PErformance Radio Local Area Network) 타입 1의 채널접근제어 프로토콜인 EY-NPMA(Elimination Yield - Non-preemptive Priority Multiple Access)프로토콜의 성능을 분석하였다. 본 논문에서는 EY-NPMA 프로토콜의 분석을 위해 시스템 모델을 설정하였으며, 채널접근 시도에서 성공할 확률과 경쟁 단계의 평균 길이를 분석하였다. 또한 M/G/1 대기행렬 모델을 사용하여 정규화된 지연시간과 처리율을 근사화 하였으며, 이러한 분석결과를 시뮬레이션을 통해 검증하였다.

• 전자공학회논문지S
• /
• 제36S권12호
• /
• pp.1-9
• /
• 1999

본 논문은 현재 유럽의 ETSI(European Telecommunication Standards Institute)의 고속 무선 근거리 통신망인 HIPERLAN(HIgh PErformance Radio Local Area Networks)의 채널접근제어 프로토콜의 성능을 분석하고 평가한다. HIPERLAN의 채널접근제어 프로토콜은 EY-NPMA방식으로 우선 순위 단계, 제거 단계와 양보단계로 구성된 채널 경쟁 기간을 통해 데이터를 전송한다. 제거 단계와 양보 단계로 구성된 채널 경쟁 단계를 해석적 분석을 한 후 이를 이용하여 처리율을 분석하고 시뮬레이션을 통하여 검증하였다. 이는 HIPERLAN 프로토콜 설계 및 구현시 유용하게 사용될 것이다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1917-1921
• /
• 2008

Ultraviolet-nanoimprint lithography (UV-NIL) is promising technology for cost effectively defining micro/nano scale structure at room temperature and low pressure. In addition, this technology is fascinating because of it's possibility for high-throughput patterning without complex processes. However, to acquire good micro/nano patterns using this technology, there are some challenges such as uniformity and fidelity of patterns, etc. In this paper, we have focused on uniform contact mechanism and performed contact mechanics analysis. The dimension of the flexible sheet to get adequate uniform contact area has been obtained from contact mechanics simulation. Based on this analysis, we have made a uniform pressurizing device and confirmed its uniform pressurized zone using a pressure sensing paper.

• 한국전기전자재료학회논문지
• /
• 제14권3호
• /
• pp.175-184
• /
• 2001

In this study, the improved throughput and stability in device fabrication could be obtained by applying CMP process to STi structue in 0.18 um semiconductor device. To employ the CMP process in STI structure, the Reverse Moat Process used to be added after STI Fill, as a result, the process became more complex and the defect were seriously increased than they had been,. Removal rate of each thin film in STI CMP was not uniform, so, the device must have been affected. That is, in case of excessive CMP, the damage on the active area was occurred, and in the case of insufficient CMP nitride remaining was happened on that area. Both of them deteriorated device characteristics. As a solution to these problems, the development of slurry having high removal rate and high oxide to nitride selectivity has been studied. The process using this slurry afford low defect levels, improved yield, and a simplified process flow. In this study, we evaluated the 'High Selectivity Slurry' to do a global planarization without reverse moat step, and also we evaluated EPD(Eend Point Detection) system with which 'in-situ end point detection' is possible.

• Design & Manufacturing
• /
• 제2권1호
• /
• pp.45-50
• /
• 2008

Micro channel is to fabricate desired pattern on the polymer substrate by pressing the patterned mold against the substrate which is heated above the glass transition temperature, and it is a high throughput fabrication method for bio chip, optical microstructure, etc. due to the simultaneous large area patterning. However, the bad pattern fidelity in large area patterning is one of the obstacles to applying the hot embossing technology for mass production. In the present study, stamper of cross channel with width $100{\mu}m$ and height $50{\mu}m$ was manufactured using UV-LiGA process. Micro channel was manufactured using stamper manufactured in this study. Also replicability appliance was evaluated for micro channel and factors affected replicability were investigated using Taguchi method.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제9권11호
• /
• pp.4436-4452
• /
• 2015

The IEEE 802.15.6 standard is introduced to satisfy all the requirements for monitoring systems operating in, on, or around the human body. In this paper, analytical models are developed for evaluating the performance of the IEEE 802.15.6 CSMA/CA-based medium access control protocol for wireless body area networks (WBAN) under unsaturation condition. We employ a three-dimensional Markov chain to model the backoff procedure, and an M/G/1/K queuing system to describe the packet queues in the buffer. The throughput and delay performances of WBAN operating in the beacon mode are analyzed in heterogeneous network comprised of different user priorities. Simulation results are included to demonstrate the accuracy of the proposed analytical model.