• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.678-679
• /
• 2006

The effects of particle size on the surface properties of hydro-thermally synthesized barium titanate powders were investigated by means of particle size analysis, specific surface area, SEM, zeta potential and XPS. Particle sizes were measured by laser light scattering and are in the range of 150 to 1100nm. Zeta potential increased with increasing particle size and it was large minus value in the range of particle size from 500 to 900nm, which seems to be related with the dissolution of $Ba^{2+}$ ion in these particle sizes from the analysis of surface properties by XPS.

• Journal of Environmental Impact Assessment
• /
• v.17 no.6
• /
• pp.321-333
• /
• 2008

Considering risks and artificial enrichments of metals in the soils of the study area, the study aims to analyze geology, grain size and geochemistry. Geology is mainly composed of gneisses and phyllites of metamorphic rocks, sandstones, siltstones, shales, tuffs of sedimentary ones and granites and andesites of igneous ones in the area. In the area, mean contents of metals are not meaningful in accordance with petrogenesis. The soil textures of the area are of S, lS and sL of sandy soil, L, scL, cL of loam and C, zC and sC of clayey soil. Mean contents of Ni, Cr, Co and Cu are meaningfully high in loam and clayey soil relative to sandy soil, whereas Ni, Zn, Cd contents are higher in clayey soil than in loam. Those differences imply the metallic contents are dependent to grain size. Based on the metal contents in the soils of the study area, Cu and Zn in loams and Pb in sandy soils are corresponded to soil contamination warning standards, and As showing 75mg/kg of maximum content in loams is assigned to soil contamination countermeasure standards, respectively. Artificial enrichment factor minimized wall rock and grain size relations is over 1 in Cr, Ni and Cu, but the factor is below 1 in average of other metals.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2006.05a
• /
• pp.169-172
• /
• 2006

Korean Apartment Housing, which has been built up for short-time, represents as popular housing reflecting our unique cultural background, and recently the utility room in apartment housing has been changed to accept residents' needs, focusing on their improving life styles. At this point, the purpose of this study Is to analyze the characteristics of the utility room between 1995 and 2005 in order to grasp the current change of the utility space in Korean Apartment Housing. For this, this research investigated 176 samples, collected in 'Apartment Encyclopedia(2004)'. The major results of this study are as follows : 1) As the utility room gets bigger, the size and the ratio to the whole unit area are increased, however the ratio in small area is bigger than the ratio in other area. 2) According to time, the utility room tends to increase the size and the ratio to the whole unit area, and the Increasing tendency appears distinctively after 2002. 3) The utility room used to be located with rear balcony area, however, now it appears to be planned Independently with its unique function. 4) Currently, Second-Kitchen start to plan in the apartment housing.

• Journal of Soil and Groundwater Environment
• /
• v.15 no.2
• /
• pp.1-9
• /
• 2010

Estimations of porosity and bulk density, particle size analysis of soli samples, tracer test and slug test were performed in a petroleum contaminated area of Kangwon for understanding characteristics of the aquifer. Porosities of the samples were estimated 0.158~0.257, and bulk densities were estimated as $1.73\sim2.10\;g/cm^3$. Majority proportion of the soil samples was 0.5~1.0 mm size. In the soil texture triangle, all samples were distributed at sand area. Uniformity coefficients were estimated as 7.71~10.39, and thus all samples were poorly-sorted. In the tracer test, Darcy velocity was estimated to $4.8\times10^{-6}$ cm/day, effective porosity was 0.175, and longitudinal dispersivity was 0.1 m. According to the slug test, hydraulic conductivities of the test wells were estimated as $2.243\times10^{-2}\sim1.634\times10^{-2}$ cm/sec. These hydrogeologic parameters can be used for efficient remediation design of the petroleum contaminated area.

• Journal of the Korean Institute of Educational Facilities
• /
• v.9 no.3
• /
• pp.13-21
• /
• 2002

The new design concept for the middle school is developed as the seventh curriculum is published. However, the credible data for a plan study and spatial organization, and the type of rooms, and using area are hardly found. On this background, the purpose of this study is to provide fundamental resources for the design of middle schools and to recognize national status of plan organizations of middle schools with analizing the space and the type of rooms of collecting 150 schools' architectural plan drafted by city, province education office for 4 years(from 1997 to 2000) As a result, we know that although the class size of school is same, the area for school buildings is very diverse. Then, in order to increasing the area and to develop school buildings' quility, the meaning of standard level should be changed urgently minimum size to optimun size.

• Particle and aerosol research
• /
• v.8 no.4
• /
• pp.151-160
• /
• 2012

Health effects caused by the ultrafine particles in ambient air are great concern to the public health, and the strict measuring and monitoring of the ambient aerosol are required. In this work, the characteristics of the aerosol size distribution in Pohang province are studied. Optical particle counters (Grimm APS 1108 and 1109) were used to measure the aerosol size distribution in the area. Locations near the national monitoring site located in the industrial and the residence area were selected for the measuring sites of this study, and the locations in border area between the industry and the residence were selected for the reference of the comparison. In the industry site, it is found that the concentration of aerosol particles near the size of 5 ${\mu}m$ appear characteristically and the fluctuations in concentration with respect to time are minimal. The mass concentration of the aerosol above 10 ${\mu}m$ in diameter in the industry area was found to fluctuate significantly. The mass portion of $PM_{10}$ and PM2.5 to TSP in the residence area were 83% and 51% respectively. In the industrial regional, it was found that the mass portion of PM10 and $PM_{2.5}$ to TSP were 76% and 35% respectively. In the boundary area the mass portion of $PM_{10}$ and $PM_{2.5}$ to TSP were 78% and 54% respectively.

• Journal of Welding and Joining
• /
• v.24 no.4
• /
• pp.32-38
• /
• 2006

The objective of present research works is to investigate the effects of process parameters, including the power of laser, cutting speed, material thickness, and the edge angle, on the melted area in the sharp edge of the cut material fur the case of cutting of a low carbon steel sheet using high-power CW Nd:YAG laser. In order to investigate the influence of edge angle and size of loop on the melted area in the sharp edge, angular cutting tests and loop cutting tests have been carried out. From the results of angular cutting tests, the relationship between the edge angle and the melted area has been obtained. The results of the experiments have been shown that the melted area is rapidly reduced from $120^{\circ}$ of the edge angle and the melted area is nearly zero at $150^{\circ}$ of the edge angle. Through the results of loop cutting experiments, the relationship between the cutting angle on the melted area in the edge according to the size of loop have been obtained. In addition, it has been shown that a proper size of loop is nearly 3 mm as the corner angle is greater than $90^{\circ}$ and 5 mm as the comer angle is less than $90^{\circ}$. The results of above experiments will be reflected on the knowledge base to generate optimal cutting path of the laser.

• Korean Journal of Community Nutrition
• /
• v.11 no.2
• /
• pp.180-190
• /
• 2006

The purpose of this study was to assess several indices of diet quality based on nutrient, food and food group intake of Korean adolescents based on several indices on diet quality according to residence area and body size. Using the data from the 1998 National Health and Nutrition Survey, twenty-four-hour-dietary recalls of a total of 1,110 Korean adolescents aged 13 - 19 years (male 543, female 567) were analyzed for nutrient adequacy ratio (NAR) , index of nutritional quality (INQ) , the number of foods (Dietary Variety Score, DVS) and food group consumed (Dietary Diversity Score, DDS) . In doing that, it was attempted to apply only the minimum amount of solid foods of Kant's without inclusion of liquid foods because of the very limited variety in Korean foods. Based on weight length index, 13.1% of the subjects were categorized as obese, 14.2%, overweight, 44.4%, normal and 28.3%, underweight. Only vitamin B2 intake was higher in the obese group than in the underweight group. There was no meaningful difference in energy, protein and fat intakes according to the grade of the body size. In terms of residence area, intake of fat, niacin, vitamin $B_6$ and folic acid were lower in the rural areas than in the metropolitan city. Only vitamin E intake was higher in the rural areas. Mean value of NARs (MAR) and INQs (mINQ) was also higher in the metropolitan city than in the rural areas, but there was no significant difference of these two values according to body size of the subjects. Mean DVS was 21.02 for total subjects, and has no difference between male and female and between metropolitan city and other medium-small city. But, the rural areas showed the lowest DVS of 19.05. Mean DDS in which five is a maximum score was 3.3 with no significant difference by sex and by residence area in male subjects. However, in female subjects, DDS in the rural areas was the lowest. According to body size of the subjects, there was no meaningful difference in both scores of DVS and DDS. In conclusion, most indices of nutrient intake and food and food group intake were not significantly different by body size of the subjects, while most indices were significantly different by residence areas: higher in the metropolitan city than in the rural area.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2007.04a
• /
• pp.201-205
• /
• 2007

In the post-Cold War era, acquisition technique of high-resolution satellite imagery (HRSI) has begun to commercialize. IKONOS-2 satellite imaging data is supplied for the first time in the 21st century. Many researchers testified mapping possibility of the HRSI data instead of aerial photography. It is easy to renew and automate a topographical map because HRSI not only can be more taken widely and periodically than aerial photography, but also can be directly supplied as digital image. In this study matching size of IKONOS Geo-level stereo image is presented lot production of digital elevation model (DEM). We applied area based matching method using correlation coefficient of pixel brightness value between the two images. After matching line (where "matching line" implies straight line that is approximated to complex non-linear epipolar geometry) is established by exterior orientation parameters (EOPs) to minimize search area, the matching is tarried out based on this line. The experiment on matching size is performed according to land cover property, which is divided off into four areas (water, urban land, forest land and agricultural land). In each of the test areas, window size for the highest correlation coefficient is selected as propel size for matching. As the results of experiment, the proper size was selected as $123{\times}123$ pixels window, $13{\times}13$ pixels window, $129{\times}129$ pixels window and $81{\times}81$ pixels window in the water area, urban land, forest land and agricultural land, respectively. Of course, determination of the matching size by the correlation coefficient may be not absolute appraisal method. Optimum matching size using the geometric accuracy therefore, will be presented by the further work.

• The Korean Journal of Ecology
• /
• v.21 no.5_1
• /
• pp.409-418
• /
• 1998

A molel study was conducted to determine the optimal sample size for the analysis of the aquatic insect community in a stream reach of the Pangtae Creek, Kangwon-do in October 1995 and may 1996. The results showed that the required minimum sample size varied and depended on the purposes of the community analysis. Acoording to the Species: Area Curve method, at least 16 Surber samplings ($30{\times}30cm$) were required in a stream reach in each spring and fall survey. The species diversity index did not vary significantly as the sample size increased. Based on the coefficient of variation analysis, the minimum sample sizes of 10 were required in order to compare seasonal differences of the community in the study area. Considering the static community structure of aquatic insects, including both species numbers and individual numbers of aquatic insects, 11 and 7 samplings were optimal sizes for the fall and spring survey, respectively. We concluded that 12 Surber samplings from 3 riffle-pool sequences (4 samplings at each riffle-pool sequence) would be required in a stream reach (length 1 km) to obtain reliable as well as cost efficient data. Our model showed that the optimal sample size should be determined by interactions between minimum sample size, the degree of data reliability, and cost efficiency.