• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.58 no.2
• /
• pp.159-174
• /
• 2022

Flow prediction was carried out through observational survey and three dimensional multi-layered numerical diagnostic model experiment to clarify the time and spatial structure of tidal current and residual flow dominant in the sea exchange and material circulation of the waters around Geumo Islands in the southern waters of Korea. The horizontal variation of tidal current is so large that it causes asymmetric tidal mixing due to horizontal eddies and the topographical effect creating convergence and dispersion of flow direction and velocity. Due to strong tidal currents flowing northwest-southeast, counterclockwise and clockwise eddies are formed on the left and right sides of the south of Sori Island. These topographical eddies are created by horizontal turbulence and bottom friction causing nonlinear effects. Baroclinic density flows are less than 5 cm/s at coastal area in summer and the entire sea area in winter. The wind driven currents assuming summer and winter seasonal winds are also less than 5 cm/s and the current flow rate is high in winter. Density current in summer and wind driven current in winter have a relatively greater effect on the net residual flows (tidal residual current + density current + density driven current) around Geumo Islands Sea area.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.34 no.1
• /
• pp.69-78
• /
• 2018

The purpose of this study is propose eco-friendly remodeling while protecting the living environment of existing residents and preserving the living in pleasant by considering the characteristic of high density sloped residential area. And then, the optimum insulation condition is analyzed based on the energy efficiency, economic analysis and environmental effect. It will be possible as the basic information for remodeling of each housing in sloped area. The energy demanding, cost and the carbon emission reduction is analyzed with the residential area in Seo-gu, Busan by eco-remodelling.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.5
• /
• pp.852-857
• /
• 2006

This paper presents a precision method to calculate the electric field density of mountain area using digital terrain elevation data(DTED). Generally we calculate the electric field density of a point adding a direct field density and horizontal reflection field density between two points. In this paper, we consider a vertical reflection field density from vertical surface near the wave propagation line between transmitter and receiver. The vertical reflection electric field have different propagation path and polarization from a horizontal reflection field. And the total electric field density adding horizontal field density and vertical reflection value is more accurate than a direct path electrical field density or direct field density adding a horizontal reflection field density.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.59 no.3
• /
• pp.231-241
• /
• 2023

This study was investigated in order to find composition and density of fisheries resource using bottom trawl in April, July, August, and November 2022 in the East China Sea. The average density of fisheries resource was estimated using the swept area method. As a result, 35 species were collected from the East China Sea. These included 21 fishes, six crustaceans, six cephalopods and two echinoderms. Seasonally, the average density of crustacean individuals per unit area were highest in November (692.1 inds./km²), while cephalopod individuals per unit area were highest in August (39.4 inds./km²). The average density of fish individuals per unit area were highest in August at 355.0 (inds./km²).

• Korean Journal of Environment and Ecology
• /
• v.26 no.5
• /
• pp.654-667
• /
• 2012

To know the effect of construction works at the Busan New Port on the activity of otters, changes in the distribution of spraints were investigated at 5 areas(I-V) composed of 16 locations in 12 islands from 2003 to 2011. There were significant differences among the density of spraints at each area(P=0.0502), at each year(P=0.0040) and at each area during the study period(P=0.0005). The densities of spraints in the areas II (P=0.000) and IV (P=0.012) were significantly different according to whether the construction work was carried out or not at each area. It was found that the density of spraints in each area was affected by the disturbance with construction works or other factors inside and/or outside the area. The average density of spraints of the 5 areas had changed according to the process of the construction works as follows. In 2003-2005 when the construction work was proceeded mainly at the area IV, the average density of spraints of the 5 areas as well as the density in the area II increased annually, whereas the densities in the other 4 areas were low and relatively constant. This fact suggests that otters might have moved into the area II from outside the study area. In 2006-2009 when the construction works were carried out on a larger scale at the areas I, II and III, there was a little decrease in the average density of spraints during the latter two years, suggesting a little decrease in the activity of otters in the study area. As regards the density of spraints at each area, it decreased considerably in the area II, but increased fairly in the areas III and IV. Accordingly it was indicated that otters in the area II where the construction work was carried out since 2006 might have moved into the area IV with no work, and otters inhabiting the Jeodo, Geoje city, where the construction work was carried out at that time, might have moved into the area III with no work at the sea shore. In 2010-2011 when the construction works were conducted at all the areas on a fairly large scale, the average density of spraints of the 5 areas as well as the densities in the areas II, III and IV, decreased considerably compared to the those in the year 2009. This fact clearly indicates that the number of otters decreased owing to the multiple simultaneous works in this period. In conclusion, otters must be affected by the construction works at the study area, and their numbers might be decreased mainly due to the multiple simultaneous works, as well as by the long-term works resulting in the decrease of seashore, marine pollution, and reducing prey available.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.9
• /
• pp.298-303
• /
• 2018

This study discusses the conceptual definition of a balcony and the emergence of basic-type and expansion-type floor plans according to the balcony utilization. In addition, the change in building density is analyzed with regard to real cases, and base data are offered for future urban policies in Incheon Metropolitan City. The context of the Building Acts could be understood through the analysis of various balcony definitions and characteristics, and the analysis was divided into basic and extension types according to the legalization that occurred in 2005. The issue of density according to balcony expansion is discussed through theories, and a planned attempt at density management in the target area is investigated. The building area, floor area, and floor area ratio are discussed with regard to the target area, and the density management is empirically proven, which is different from the Unit Plan.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.6
• /
• pp.746-751
• /
• 2014

This paper presents a method to calculate a sag cumulative table and density table based on the area of vulnerability to voltage sags. The expected sag performance at sensitive load points can be easily assessed through the calculation of the sag cumulative table and density table. However, the calculation of the tables regarding large power systems is very difficult task. Therefore, an efficient method for calculating the tables is needed. In this paper, the improved method to determine the areas of vulnerability is addressed and the method to calculate the tables based on the area of vulnerability is also described. The proposed scheme can be efficiently used to assess the voltage sag performance at sensitive load points in large power systems.

• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.3
• /
• pp.428-433
• /
• 2004

The aim of this study was to investigate the histochemical parameters of muscle fibers, and to estimate the correlation between these histological parameters and carcass traits in pigs. A total of 230 crossbred Duroc$\times$(Yorkshire$\times$Landrace) pigs (149 gilts and 81 castrated male pigs) was evaluated. Carcass traits (carcass weight, backfat thickness, and loin eye area), muscle fiber size (crosssectional area, diameter, and perimeter), muscle fiber number (density of fibers/$mm^2$ and total number of fibers), and fiber type composition (percentages of myofibers and relative areas of each fiber type) were evaluated. Mean cross-sectional area (CSA) and type IIB fiber CSA were positively correlated to carcass weight, backfat thickness and loin eye area. Mean fiber CSA was mostly related to type IIB CSA (r=0.98) as a result of the high percentage of type IIB fibers in the longissimus muscle. Correlations between fiber diameters and perimeters were also high, and showed similar results with CSA. Mean fiber density was negatively correlated to carcass weight (r=-0.24), backfat thickness (r=-0.18) and loin eye area (r=-0.27). To the contrary, total fiber number was positively correlated with carcass weight (r=0.27) and loin eye area (r=0.53). Carcass weight and loin eyZe area were not significantly related to muscle fiber composition. For backfat thickness, there was an opposition between type IIA percentage, which was positively related and type IIB percentage, which was negatively related. Fiber type composition of type I and IIA fibers were negatively correlated to that of type IIB fibers (r=-0.67 to -0.74). In the present study, carcass weight and loin eye area were positively correlated to CSA and negatively correlated to fiber density. But, these relationships were generally low. The fiber density was strongly affected by muscle fiber size and the total fiber number was affected either by CSA of muscle fiber and loin eye area. Fiber type composition was much more related to their numerical abundance than their CSA.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.29 no.1
• /
• pp.161-173
• /
• 1999

This study was performed to compare the bone mineral densities measured at mandibular premolar area by copper-equivalent image and hydroxyapatite phantom with those measured at radius by dual energy absorptiometry and to evaluate the clinical usefulness of Digital system with slide scanner, copper-equivalent image, and hydroxyapatite phantom. For experiment. intraoral radiograms of 15 normal subjects ranged from 20 years old to 67 old were taken with copper-step wedge at mandibular premolar area and bone mineral densities calculated by conversion equation to bone mineral density of hydroxyapatite were compared with those measured at radius distal 1/3 area by Hologic QDR-1000. Obtained results as follows: 1) The conversion equation was Y=5.97X-0.25 and its determination coefficient was 0.9967. The coefficient of variation in the measurement of copper-equivalent value ranged from 4％ to 8％ and showed high reproducibility. 2) The coefficient of variation in the measurement of bone mineral density by the equation ranged from 7％ to 8％ and showed high reproducibility. 3) The bone mineral densities ranged from 0.35 to 0.79g/cm2 at mandibular premolararea. 4) The correlation coefficient between bone mineral densities at mandibular premolar area and those at radius distal 1/3 area was 0.8965. As summary, digital image analyzing system using copper-equivalent image and hydroxyapatite phantom appeared to be clinically useful to measure the bone mineral density at dental area.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.7
• /
• pp.694-700
• /
• 2013

Urban area is a representative environment of wireless channels in the mobile communication, building density has a different distribution depending on the location. Building density has affect to propagation prediction For this reason, building density is expected to affect to the channel characteristics, we need to analyze it. We measured channel characteristics in urban areas of Jeju island by channel sounder and $4{\times}4$ antenna. Channel characteristics considering the building density were derived based on the measured data in the urban area. In this paper, the measurement data is analyzed and channel characteristics are derived through MIMO Channel measurements at 700 MHz considering the building density in the urban area.