• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.1702-1707
• /
• 2003

Absorptive material arrangement method for effective interior noise control is proposed. Sound field with arbitrary boundary condition is formulated by Kirchhoff-Helmholtz integral equation. A simple example such as a rectangular cavity will present physical meaning between changing boundary condition and control of sound field. The effect of changing boundary condition is expressed in modal admittance. From this formulation, an admittance map is presented. The admittance map is the figure to represent position where absorptive material is attached. The admittance map can be assigned to each resonant frequency. There, however, may be common area of those maps. Then, frequency robust arrangement of absorptive material in noise control will be presented.

• 한국해안해양공학회지
• /
• 제13권2호
• /
• pp.100-108
• /
• 2001

지진해일 또는 조석과 같은 장파의 거동을 모의할 때 해안선의 위치는 파랑의 움직임에 따라 연속적으로 이동된다. 따라서, 수치모형에 이를 효과적으로 반영하기 위해서는 해안선을 파랑에 따라 이동시켜야 한다. 본 연구에서는 경사지형을 계단지형으로 단순화한 이동경계조건을 이용하여 해일이나 조석에 의한 최대범람구역을 결정한다. 이동경계조건을 이용하여 특정지역의 최대범람구역을 결정한 후 기존의 관측자료와 비교하였으며, 결정된 최대범람구역은 기존의 자료와 잘 일치한다.

• 한국정밀공학회지
• /
• 제20권4호
• /
• pp.204-213
• /
• 2003

A survey for finding corrosion examples was performed on the underground steel piles buried for 19 years in the area of iron and steel making factory near Young-il bay. A failure probability model, which can be used to check the reliability of the corrosive mechanical element, based on Von-Mises failure criterion and the standard normal probability function is proposed. The effects of varying boundary conditions such as temperature change, soil-friction, internal pressure, earthquake, loading of soil, traffic loads and corrosion on failure probability of the buried steel piles are systematically investigated. To allow for the uncertainties of the design variables, a reliability analysis technique has been adopted; this also allows calculation of the relative contribution of the random variables and the sensitivity of the failure probability.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2007년도 정기 학술대회 논문집
• /
• pp.513-518
• /
• 2007

A polygon-wise constant curvature natural element approximation is presented in this paper for the numerical implementation of the abstract Kirchhoff plate model. The strict continuity requirement in the displacement field is relaxed by converting the area integral of the curvatures into the boundary integral along the Voronoi boundary. Curvatures and bending moments are assumed to be constant within each Voronoi polygon, and the Voronoi-polygon-wise constant curvatures are derived in a selective manner for the sake of the imposition of essential boundary conditions. The numerical results illustrating the proposed method are also given.

• Steel and Composite Structures
• /
• 제2권2호
• /
• pp.99-112
• /
• 2002

The differential quadrature method (DQM) is a numerical technique of rather recent origin, which by its continually increasing applications in different problems of engineering, is a competing alternative to the conventional numerical techniques for the solution of initial and boundary value problems. The work of this paper concerns the application of the DQM in the area of the buckling of multi layered orthotropic composite plates with various boundary conditions the buckling of multi layered composite plates with constant and variable thickness under axial compressive static loading is considered. The effects of fiber orientation and boundary conditions on static behavior of composite plates are presented. The comparison of results from the present method and those obtained from NISA II software shows the accuracy and reliability of this method.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2013년도 제46회 KOSCO SYMPOSIUM 초록집
• /
• pp.95-96
• /
• 2013

Numerical simulations are conducted to investigate the mechanism of spontaneous ignition of hydrogen within a certain length of downstream pipe released by the failure of pressure boundaries of various geometric assumption. The results show that local ignition is developed in limited area such as boundary layer and the mixing of hydrogen and air is weak at the planar pressure boundary conditions, whereas the flame fronts at the contact region are developed at the pressure boundaries of the spherical shape.

• 대한두개안면성형외과학회지
• /
• 제17권3호
• /
• pp.140-145
• /
• 2016

Background: The nasal septal cartilage is often used as a donor graft in rhinoplasty operations but can vary widely in size across the patient population. As such, preoperative estimation of the cartilaginous area is important for patient counseling as well as operating planning. We aim to estimate septal cartilage area by using facial computed tomography (CT) studies. Methods: The study was performed using facial CT images taken from 200 patients between January 2012 to July 2015. Using the mid-sagittal image, the boundary of cartilaginous septum was delineated from soft tissue using the mean difference in signal intensity (or brightness). The area within this boundary was calculated. The calculated area for septal cartilage was then compared across age groups and sexes. Results: Overall, the mean area of nasal septal cartilage was $8.18cm^2$ with the maximum of $12.42cm^2$ and the minimum of $4.89cm^2$. The cartilage areas were measured to be larger in men than in women (p<0.05). The area decreased with advancing age (p<0.05). Conclusion: Measuring the size of septal cartilage using brightness difference is more precise and reliable than previously reported methods. This method can be utilized as the standard for prevention of postoperative complication.

• 암석학회지
• /
• 제17권3호
• /
• pp.144-153
• /
• 2008

평택-아산 지역에 분포하는 신생대 현무암질 암석의 Sr, Nd, Pb 동위원소 조성은 한국의 다른 신생대 현무암들과 마찬가지로 중앙해령 현무암에 비해 상당히 부화된 값을 보여준다. 평택-아산 지역을 포함하는 한국의 신생대 현무암질 암석들 대부분은 제주도의 현무암들과는 달리 비교적 낮은 $^{206}Pb/^{204}Pb$ 성분을 갖는 부화맨틀과 결핍맨틀 사이의 혼합으로 설명될 수 있다. 반면에 제주도의 경우는 보다 높은 $^{206}Pb/^{204}Pb$ 성분을 갖는 부화맨틀과 결핍맨틀 사이의 혼합으로 설명된다. 이러한 경향성은 북동 중국과 남동중국의 신생대 현무암들에서도 유사한 부화맨틀 단성분의 차이가 발견되는 것과 연관지어 해석할 때는 한국의 중부지역과 남부지역 아래의 대륙암권 맨틀이 각각 북중국지괴 및 남중국지괴의 동측 연장부일 가능성을 나타낸다. 제주도 아래에 남중국 지괴와 같은 종류의 대륙암권맨틀의 성분이 나타나는 것은 중국의 대륙충돌대 위치와 관련한 만입모델로는 설명할 수 없다. 오히려 맨틀의 조성에서 뚜렷한 차이를 보이는 두 대륙의 봉합대가 한반도의 중부와 남부지역의 사이로 지나가며 그 위치는 평택-아산 지역보다 더 남쪽임을 시사한다. 대륙충돌대 경계의 위치가 과거의 연구에서 주로 주장되던 임진강대의 위치와는 상당히 다른 것은 맨틀 경계가 지각의 경계와 다를 가능성을 배제할 수 없다.

• Structural Engineering and Mechanics
• /
• 제64권6권
• /
• pp.695-701
• /
• 2017

This paper investigates some general properties in the degenerate scale problem of antiplane elasticity or Laplace equation. For a given configuration, the degenerate scale problem is solved by using conformal mapping technique, or by using the null field BIE (boundary integral equation) numerically. After solving the problem, we can define and evaluate the degenerate area which is defined by the area enclosed by the contour in the degenerate configuration. It is found that the degenerate area is an important parameter in the problem. After using the conformal mapping, the degenerate area can be easily evaluated. The degenerate area for many configurations, from triangle, quadrilles and N-gon configuration are evaluated numerically. Most properties studied can only be found by numerical computation. The investigated properties provide a deeper understanding for the degenerate scale problem.

• International Journal of Fluid Machinery and Systems
• /
• 제6권2호
• /
• pp.56-74
• /
• 2013

Stall stagnations in the system of axial-flow compressors and ducts occur in transition from deep surge conditions to decayed or converged stall conditions. The present study is concerned with the boundaries between the deep surges and the stagnation stalls on the basis of analytical results by a code on surge transients analysis and simulation. The fundamental acoustical-geometrical stagnation boundaries were made clear from examinations of the results on a variety of duct configurations coupled with a nine-stage compressor and a single stage fan. The boundary was found to be formed by three parts, i.e., B- and A-boundaries, and an intermediate zone. The B-boundary occurs for the suction-duct having a length of about a quarter of the wave-length of the first resonance in the case of very short and fat plenum-type delivery duct. On the other hand, the A-boundary occurs for the long and narrow duct-type delivery flow-path having a length about a fifth of the wavelength and relatively small sectional area in the case of short and narrow suction ducts. In addition to this, the reduced surge-cycle frequencies with respect to the duct lengths are observed to have respective limiting values at the stagnation boundaries. The reduced frequency for the B-boundary is related with a limiting value of the Greitzer's B parameter. The tendency and the characteristic features of the related flow behaviors in the neighborhood of the boundaries were also made clearer.