• Korean Journal of Heritage: History & Science
• /
• v.53 no.3
• /
• pp.80-109
• /
• 2020

The Sacheonwangsa Temple in Silla is an esoteric temple that was founded provisionally in 670, and was completed in 679. This study attempted to elucidate the planning method of the Sacheonwangsa Temple based on the results of research on excavations and investigations into its construction processes and construction measures thereof. The research results are as follows. (1) In the site construction, assuming the size of one Bang (坊) on the south of Nangsan Mountain, after dividing the north-south width into three equal parts, there is a possibility that two of these parts were set to the flat portion. (2) In the 'Jochang (祖創, 670)', it is estimated that an area of 300 cheoks by 300 cheoks was postulated on the flat surface, and, as an initial conception, the mandala's plane design of the outer square 2 hasta (3 cheoks) and inner square 1 hasta (1.5 cheoks) was originally devised for the setting of 'Mudra (神印)', and an area 100 times greater has been set as the basis in the scale and layout planning of the central block. (3) During 'Gaechang (攺刱, ~679)', it is judged that because of the narrowness of the distance between the Pagoda and Geumdang Hall, which occurs when the center of the Geumdang Hall coincides with the center of 'the first stage of the foundation (先築基壇)', the scale and layout planning were adjusted from the initial conception. (4) The arrangement of the building was determined by dividing the fixed size of the central block (280 cheoks by 320 cheoks). Specifically, the east-west direction is set on the quartile's line of the east-west width of the central block, and in contrast, the north-south direction is based on the structural characteristics of the central block. It is presumed that the position of the transept was determined through the division and adjustment of the column spacing of the east-west corridor, then the Geumdang Hall and Altar were based on this. (5) The scale of the Geumdang Hall and Pagoda is determined by the petition of the division by the unit fraction starting from the quartile's line of the central block's east-west width. This planning is understood to be based on the self-similarity, which is rooted in the mandala's plane design as the model.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.27 no.7
• /
• pp.380-394
• /
• 2015

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2014. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) The research works on the thermal and fluid engineering have been reviewed as groups of heat and mass transfer, cooling and heating, and air-conditioning, the flow inside building rooms, and smoke control on fire. Research issues dealing with duct and pipe were reduced, but flows inside building rooms, and smoke controls were newly added in thermal and fluid engineering research area. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the results for thermal contact resistance measurement of metal interface, a fan coil with an oval-type heat exchanger, fouling characteristics of plate heat exchangers, effect of rib pitch in a two wall divergent channel, semi-empirical analysis in vertical mesoscale tubes, an integrated drying machine, microscale surface wrinkles, brazed plate heat exchangers, numerical analysis in printed circuit heat exchanger. In the area of pool boiling and condensing, non-uniform air flow, PCM applied thermal storage wall system, a new wavy cylindrical shape capsule, and HFC32/HFC152a mixtures on enhanced tubes, were actively studied. In the area of industrial heat exchangers, researches on solar water storage tank, effective design on the inserting part of refrigerator door gasket, impact of different boundary conditions in generating g-function, various construction of SCW type ground heat exchanger and a heat pump for closed cooling water heat recovery were performed. (3) In the field of refrigeration, various studies were carried out in the categories of refrigeration cycle, alternative refrigeration and modelling and controls including energy recoveries from industrial boilers and vehicles, improvement of dehumidification systems, novel defrost systems, fault diagnosis and optimum controls for heat pump systems. It is particularly notable that a substantial number of studies were dedicated for the development of air-conditioning and power recovery systems for electric vehicles in this year. (4) In building mechanical system research fields, seventeen studies were reported for achieving effective design of the mechanical systems, and also for maximizing the energy efficiency of buildings. The topics of the studies included energy performance, HVAC system, ventilation, and renewable energies, piping in the buildings. Proposed designs, performance performance tests using numerical methods and experiments provide useful information and key data which can improve the energy efficiency of the buildings. (5) The field of architectural environment was mostly focused on indoor environment and building energy. The main researches of indoor environment were related to the evaluation of work noise in tunnel construction and the simulation and development of a light-shelf system. The subjects of building energy were worked on the energy saving of office building applied with window blind and phase change material(PCM), a method of existing building energy simulation using energy audit data, the estimation of thermal consumption unit of apartment building and its case studies, dynamic window performance, a writing method of energy consumption report and energy estimation of apartment building using district heating system. The remained studies were related to the improvement of architectural engineering education system for plant engineering industry, estimating cooling and heating degree days for variable base temperature, a prediction method of underground temperature, the comfort control algorithm of car air conditioner, the smoke control performance evaluation of high-rise building, evaluation of thermal energy systems of bio safety laboratory and a development of measuring device of solar heat gain coefficient of fenestration system.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.25 no.6
• /
• pp.346-361
• /
• 2013

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2012. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. The conclusions are as follows : (1) The research works on thermal and fluid engineering have been reviewed as groups of fluid machinery, pipes and valves, fuel cells and power plants, ground-coupled heat pumps, and general heat and mass transfer systems. Research issues are mainly focused on new and renewable energy systems, such as fuel cells, ocean thermal energy conversion power plants, and ground-coupled heat pump systems. (2) Research works on the heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer, and industrial heat exchangers. Researches on heat transfer characteristics included the results for natural convection in a square enclosure with two hot circular cylinders, non-uniform grooved tube considering tube expansion, single-tube annular baffle system, broadcasting LED light with ion wind generator, mechanical property and microstructure of SA213 P92 boiler pipe steel, and flat plate using multiple tripping wires. In the area of pool boiling and condensing heat transfer, researches on the design of a micro-channel heat exchanger for a heat pump, numerical simulation of a heat pump evaporator considering the pressure drop in the distributor and capillary tubes, critical heat flux on a thermoexcel-E enhanced surface, and the performance of a fin-and-tube condenser with non-uniform air distribution and different tube types were actively carried out. In the area of industrial heat exchangers, researches on a plate heat exchanger type dehumidifier, fin-tube heat exchanger, an electric circuit transient analogy model in a vertical closed loop ground heat exchanger, heat transfer characteristics of a double skin window for plant factory, a regenerative heat exchanger depending on its porous structure, and various types of plate heat exchangers were performed. (3) In the field of refrigeration, various studies were executed to improve refrigeration system performance, and to evaluate the applicability of alternative refrigerants and new components. Various topics were presented in the area of refrigeration cycle. Research issues mainly focused on the enhancement of the system performance. In the alternative refrigerant area, studies on CO2, R32/R152a mixture, and R1234yf were performed. Studies on the design and performance analysis of various compressors and evaporator were executed. (4) In building mechanical system research fields, twenty-nine studies were conducted to achieve effective design of mechanical systems, and also to maximize the energy efficiency of buildings. The topics of the studies included heating and cooling, HVAC system, ventilation, renewable energy systems, and lighting systems in buildings. New designs and performance tests using numerical methods and experiments provide useful information and key data, which can improve the energy efficiency of buildings. (5) In the fields of the architectural environment, studies for various purposes, such as indoor environment, building energy, and renewable energy were performed. In particular, building energy-related researches and renewable energy systems have been mainly studied, reflecting interests in global climate change, and efforts to reduce building energy consumption by government and architectural specialists. In addition, many researches have been conducted regarding indoor environments.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.40 no.1
• /
• pp.43-56
• /
• 2012

The purpose of this study was to propose management strategies through aesthetic landscape assessments for landscape units in the Han River riparian(HRR) area. First, this research reclassified the HRR into "natural," "artificial," "agricultural," and mixed landscape types and selected 37 representative case areas(about $1km{\times}1km$). This study found 71 landscape units in consideration of topography and land surface classification. Landscape assessment consisted of landscape quality and landscape integration assessment. The criteria for assessing landscape quality were "naturalness," "interest," "uniqueness," and "landscape function." "Landscape quality" was ranked into five grades using a matrix. The landscape integration assessment consisted of an inner integration assessment in each landscape unit and outer integration assessment among landscape units. As a result of the field study, case sites were found to have 4,288 landscape units and an area of $42.8km^2$. The forest area was found to have the most space with $11,580,905m^2$(27.1%), while the wet lands had just $52,348m^2$(0.1%). In the landscape quality assessment, about 30.5% of the total area consisted of landscape units that scored highest in "naturalness". In the landscape integration assessment, about 39.3% of the total area consisted of landscape units which scored highest in "integration", denoting visual interrelation and harmony. The existence of disparities in landscape quality in accordance with the form of the landscaping was determined using a Oneway ANOVA, with "naturalistic" landscaping scoring the highest and "artificial" landscaping scoring lowest. This study may contribute to making the HRR area a more ecologically sound and visually attractive landscape space. It is recommended that the aesthetical and ecological value of the landscape unit should be assessed simultaneously in the future.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.40 no.2
• /
• pp.130-137
• /
• 2012

This research evaluated the effectiveness of organic matter ratios in substrate and mulching materials under mn-irrigated condition green roofs by measuring the effects on growth of Liatris spicata. Four mulching materials were installed, i. e. nun-mulched control(CON), volcanic ash soils(VAS), non-woven black fabric mat(NBM) and pine bark(PAK). Three levels of organic maller volume percentage in an amended soil were evaluated, amended soil: organic matter=100:0($A_1O_0$), amended soil: organic matter=80:20($A_4O_1$) and amended soil: organic matter=50:50($A_1O_1$). Plant height, number of leaves, diameter of flower stalk, number of florets, chlorophyll contents, shoot fresh and dry weight were recorded from April to September, 2010, and survival rate was examined on May 2011 of the following year. In the $A_1O_0$, the number of leaves, number of florets and chlorophyll contents were higher in Liatris spicata grown on NBM than other mulching treatments. Especially, plant height, shoot fresh and dry weight were significantly higher. However, it resulted the lowest survival rate than other mulching treatments. 2. In the $A_4O_1$, the plant height, number of leaves, number of florets, shoot fresh and dry weight were higher than other mulching treatments, but there was no significant difference except for the plant height of Liatris spicata grown on NBM. The survival rate was decreased by 40~60%, compared with $A_1O_0$, after overwintering. 3. In the $A_1O_1$, the plant height, number of leaves, diameter of flower stalk, number of florets, chlorophyll contents, shoot fresh and dry weight were slightly higher than other mulching treatments, but there was no significant difference from Liatris spicata grown on NBM and VAS. The survival rate was observed by 0% over all mulching treatments after overwintering. Therefore, the non-woven black fabric mat(NBM) promoted the Liatris spicata's growth and flowering compared with other mulching treatments. However, the survival rate was decreased significantly, and the organic matter ratios were increased after overwintering under non-irrigated green roofs.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.38 no.5
• /
• pp.113-121
• /
• 2010

Shumi-sen(須彌山), built by Nohjagong(路子工) in the southern garden of the Palace Garden during the Asuka Period, is understood as being Sumeru based on an Indian perspective of the theory of the origin of universe. It is also viewed as Mt. Myogoh from a Chinese Buddhist worldview. It is thought to be a type of assembled stone structure with Poong-ryoon (風輪)-Su-ryoon(水輪)-Geum-ryoon(金輪)-Ji-ryoon(地輪) carved into each of the 4 stone pieces. These building shapes are thought to have been utilized as stone for exterior construction as opposed to those structures built during the Shilla Period of China and Korea. Aside from Nohjagong's record of Shumi-sen, most of the records from Japan's period of the time suggest that Shumi-sen was an important element that played a role in the scenery of the seasonal outdoor gardens. It is also thought, from the sentences and expressions surrounding the records, that a combination of the seasonal sceneries was utilized centered on Shumi-sen, and that they were all used during festival events. From a perspective of analysis and interpretation dependent on the limited literature and on observation, it cannot be verified whether the Mt. Sumeru Stone(須彌山石) excavated from the Stone God Ruins is the same Shumi-sen that Nohjagong built along with Okyo(吳橋), but it is thought that the 'Shumi-sen type stone structure' that was later built repeatedly as part of the palace garden facilities is identical to the Shumi-sen built at the Imperial Palace's southern garden, or at least a re-built structure based on the Shumi-sen that Nohjagong built with stones and ponds used to create the foundation. Thus, Shumi-sen that Nohjagong supposedly built along with Okyo is suspected to be a figurative rock arrangement and, at the same time, a miniaturized scenic rock arrangement(縮景樹石) that maximized the shape of Buddhism's Shumi-sen. On the other hand, the surface pattern on Mt. Sumeru Stone is very similar to the multi -layers of mountainous pattern icons expressed in the patterns of the Great Golden Incense Burner(百濟金銅大香爐) or Mountain-Water Scenery Sculptural Brick(山水山景紋?) that were built during the Baekjae pcriod aod the rear side of Hwalsuk-jebul Basal Byungipsang(滑石諸佛菩薩竝立像); it is suspected that similar patterns would have been used if patterns were made on Shumi-sen that Nohjagong built. Also in consideration of the physical theory of MI. Sumeru Stone, the Siphon theory of using a pressure difference in water level was applied to the fountain facilities of Mt. Sumeru Stone that seemed to have been built from the practical rock arrangement perspective for the purpose of feasts, etc.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.5
• /
• pp.594-604
• /
• 2021

To evaluate the causes of beach erosion in Sinji-Myeongsasimni Beach, external forces, such as tides, tidal currents, and waves, were observed seasonally from March 2019 to March 2020, and the surface sediments were analyzed for this period. In addition, the shoreline positions and beach elevations were regularly surveyed with a VRS GPS and fixed-wing drone. From these field data, the speed of the tidal currents was noted to be insufficient, but the waves were observed to af ect the deformation of the beach. As the beach is open to the southern direction, waves of heights over 1 m were received in the S-SE direction during the spring, summer, and fall seasons. Large waves with heights over 2 m were observed during typhoons in summer and fall. Because of the absence of typhoons for the previous two years from July 2018, the beach area over datum level (DL) as of July 2018 was greater by 30,138m² compared with that of March 2019, and the beach area as of March 2020 decreased by 61,210m² compared with that of March 2019 because of four typhoon attacks after July 2018. The beach volume as of March 2019 decreased by 5.4% compared with that of July 2018 owing to two typhoons, and the beach volume as of September 2019 decreased by 7.3% because of two typhoons during the observation year. However, the volume recovered slightly by about 3% during fall and winter, when there were no high waves. According to the sediment transport vectors by GSTA, the sediments were weakly influxed from small streams located at the center of the beach; the movement vectors were not noticeable at the west beach site, but the westward sediment transport under the water and seaward vectors from the foreshore beach were prominently observed at the east beach site. These patterns of westward sediment vectors could be explained by the angle between the annual mean incident wave direction and beach opening direction. This angle was inclined 24° counterclockwise with the west-east direction. Therefore, the westward wave-induced currents developed strongly during the large-wave seasons. Hence, the sand content is high in the west-side beach but the east-side beach has been eroded seriously, where the pebbles are exposed and sand dune has decreased because of the lack of sand sources except for the soiled dunes. Therefore, it is proposed that efforts for creating new sediment sources, such as beach nourishment and reducing wave heights via submerged breakwaters, be undertaken for the eastside of the beach.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.50 no.2
• /
• pp.64-75
• /
• 2022

The purpose of this study is to illuminate the meaning of the soundscapes of two bells, Daeheung-dong Cathedral and Sungsimdang in Eunghang-dong, which are landmarks and attractions in the historic downtown of Daejeon. The study was conducted through field research and recordings, as well as literature studies of related documents and soundscape theory. Daejeon city was developed along with Daejeon Railway Station during the Japanese colonial period in the early 20th century. As the Chungnam Provincial Office moved to Daejeon, Daeheung-dong and Eunhang-dong in Jung-gu, located near Daejeon Station, developed significantly and formed the city centre. As major administrative agencies moved to Seo-gu in the 1990s, the downtown area of Daejeon was on a path of decline, and the decline accelerated with the development of Sejong city. Meanwhile, Daeheung-dong Cathedral and Sungsimdang, founded by refugees during the Korean War, firmly protected the historic downtown area of Daejeon, where the natives left. Daeheung-dong Cathedral, established during the Japanese colonial period, is a local landmark with a history of 100 years in 2019. Sungsimdang, which was created with the backdrop of the Korean War, is also a historical and cultural asset with a history of 60 years and a local landmark selected as the No. 1 tourist attraction in Daejeon. This research, which started from the sound of the bells of Daeheung-dong Cathedral, heard even in the neighboring residential areas, led to the discovery of the bells of Sungsimdang in Eunhang-dong, located across the street. In this paper, the bells of Daeheung-dong Cathedral and Eunhang-dong Sungsimdang have characteristics of soundmarks according to R. Murray Schafer's soundscape sound category. Furthermore, this paper attempted to analyze the meaning of the two bells according to the relatively recent EU soundscape definition. These two bells are signal sounds at the surface level, but are the sound marks of the historic downtown area of Daejeon at the deep level. Although there are outward differences in size, scale, frequency, and famousness, these two bells share a meaning in terms of locality and good influence with the historicity and spatiality of a special relationship. The implication of this study is that the two places should be preserved as local historical and cultural assets not only as visual landmarks but also as sound marks in the urban regeneration or urban development of Jung-gu, Daejeon.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.30 no.1
• /
• pp.127-134
• /
• 2024

With the growth of offshore wind power generation market, the corresponding installation vessel market is also growing. It is anticipated that approximately 100 installation vessels will be required in the of shore wind power generation market by 2030. With a price range of 300 to 400 billion Korean won per vessel, this represents a high-value market compared to merchant vessels. Particularly, the demand for large installation vessels with a capacity of 11 MW or more is increasing. The rapid growth of the offshore wind power generation market in the Asia-Pacific region, centered around China, has led to several discussions on orders for operational installation vessels in this region. The seabed geology in the Asia-Pacific region is dominated by clay layers with low bearing capacity. Owing to these characteristics, during vessel operations, significant spudcan and leg penetration depths occur as the installation vessel rises and descends above the water surface. In this study, using penetration variables ranging from 3 to 21 m, the unique vibration period, structural safety of the legs, and conductivity safety index were assessed based on penetration depths. As the penetration depth increases, the natural vibration period and the moment length of the leg become shorter, increasing the margin of structural strength. It is safe against overturning moment at all angles of incidence, and the maximum value occurs at 270 degrees. The conditions reviewed through this study can be used as crucial data to determine the operation of the legs according to the penetration depth when developing operating procedures for WTIV in soft soil. In conclusion, accurately determining the safety of the leg structure according to the penetration depth is directly related to the safety of the WTIV.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.9 no.1
• /
• pp.89-99
• /
• 2006

The growth and biomass of reeds(Phragmites australis) growing in a subsurface treatment wetland system were investigated from April 2003 to October 2003. Nitrogen(N) and phosphorous(P) concentrations in above-ground(AG) and below-ground(BG) tissues of reeds were examined and the removal rate of N and P by reeds were analyzed. The system, 29 m in length, 9 m in width and 0.65 m in depth, was constructed in June 2001 on a floodplain in the down reach of the Kwangju Stream in Korea in order to purify polluted water of the stream. A bottom layer of 45 cm in depth was filled with crushed granites(15~30 mm in diameter) and a middle layer of 10 cm in depth was filled with pea pebbles(10 mm in diameter). An upper layer of 5 cm contained course sand. Reeds were transplanted on the surface of the system, which were dug out of natural wetlands, and their shoots were trimmed 40 cm in height. The height and density of the shoots averaged 237.7 cm and 244.0 shoot/$m^2$, respectively, when the reeds grew fully. The maximum biomass of AG and BG tissues were 1,964 and 1,577 g/$m^2$, respectively, and the AG : BG ratio of biomass was 1.26. Mean AG and BG dry weights were recorded as 1,355 and 748 g/$m^2$, respectively. The AG and BG tissue concentrations of N averaged 12.37 and 10.01 mg/g, respectively, and those of P 2.37 and 2.03 mg/g, respectively. Inflow to the system averaged 40 $m^3$/day. The concentrations of total nitrogen(T-N) in influent and effluent were 8.4 mg/L and 3.2 mg/L, respectively, and those of total phosphorous(T-P) were 0.73 and 0.38 mg/L, respectively. The total removal of T-N and T-P by the system during the investigation period averaged 140.2 and 9.7 g/$m^2$, respectively, and the total uptake of N and P by the reeds were calculated as 24.39 and 4.73 g/$m^2$, respectively. Average removals of about 17% of N and about 49% of P by reeds were recorded. The N and P concentrations in AG tissues were significantly different among the three zones of the system:near to inflow(St1), in the middle of system(St2), and near to outflow(St3). The N and P concentrations in BG tissues were also significantly different among St1, St2 and St3. N and P concentrations in AG and BG tissues of reeds growing in St1 were higher than those in St2 and St3. The height and density of shoots of reeds in St1 were larger than those in St2 and St3. Significant amounts of N and P in the influent were taken up by reeds in St1.