• KIEAE Journal
• /
• v.9 no.4
• /
• pp.3-10
• /
• 2009

It is not an overstatement to say the factory are the number one cause in creating environmental load. However, only a few studies have been done upto this date on environmentally friendly factory. Thus, This study is to present the characteristics of environmentally friendly factory. A survey of current literatures and cases show the characteristics of environmentally friendly factories and buildings and environment assessment method and plan. To better measure the environmentally friendly qualities as written in literature across the globe, classification system was constructed. The classification system was made and important factors were found based on the precedent paper on environmentally friendly building plan and environment assessment method at building and cases and abroad in the literature review. The classification used 4 different sectors : Land & Transportation, Architectural Planning Technique, Environment & Equipment, Energy & Material. Within these 4 sectors 33 discrete factors are applied to the factory according to literature and case review and specialist advice.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.9
• /
• pp.6368-6375
• /
• 2015

The goal of this research is to identify the energy planning techniques of Smart Green City and to establish the realized plan through the analysis of Multi-functional Administrative City. For the research, eighteen planning techniques were derived and categorized into three sectors and six basic direction through literature review and Brain-storming analysis considering correlation between three goals of Smart Green City and expectation of planning technique. And Multi-functional Administrative City was analyzed for the current status of application of planning techniques focus on two application aspects. In conclusion, 'Establishing Integrated Management Center for Urban Energy', 'Building Energy Management System', 'Building Automation System', 'Green Transport System', 'Intelligent Transport System', 'Introduction of Eco-friendly Transportation' planning techniques in reduction of building energy consumption sector and green-intelligent transport system sector were identified as important techniques for Smart Green City.

• Korean Journal of Construction Engineering and Management
• /
• v.25 no.3
• /
• pp.68-82
• /
• 2024

The planning stage of laser scanning is crucial for acquiring high-quality 3D source data. It involves assessing the target space's environment and formulating an effective measurement strategy. However, existing practices often overlook on-site conditions, with decisions on scanner deployment and scanning locations relying heavily on the operators' experience. This approach has resulted in frequent modifications to scanning locations and diminished 3D data quality. Previous research has explored the selection of optimal scanner locations and conducted preliminary reviews through simulation, but these methods have significant drawbacks. They fail to consider scanner inaccuracies, do not support the use of multiple scanners, rely on less accurate 2D drawings, and require specialized knowledge in 3D modeling and programming. This study introduces an optimization technique for laser scanning planning using 3D simulation to address these issues. By evaluating the accuracy of scan data from various laser scanners and their positioning for scanning a retaining wall structure in a small-scale building, this method aids in refining the laser scanning plan. It enhances the decision-making process for end-users by ensuring data quality and reducing the need for plan adjustments during the planning phase.

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.983-989
• /
• 2009

This study aims to systematically identify direct and indirect factors that influence labor productivity and to build a model that mathematically quantifies them so as to efficiently manage and increase labor productivity in the construction work. This study was performed based on the productivity model for workers in reinforced concrete construction projects, because it aims to establish a general construction labor productivity model that reflects many factors that influence labor productivity. Using statistical analysis, we found that the components that significantly influence productivity were the worker component, the work characteristic component, the work technique component, the work management component, the equipment & materials component, and the work guide component, while the work delay components did not significantly influence productivity. In addition, a priority analysis was performed based on the components that showed statistically significant effects. The results of the analysis indicated that the influence of work management component and the work technique component is more than that of the worker component and the work characteristic component. The construction labor productivity model that was formulated in this study could be used for the determining the standard productivity during the initial planning stage, so the best strategy for increasing labor productivity could be formulated.

• Journal of the Regional Association of Architectural Institute of Korea
• /
• v.20 no.6
• /
• pp.71-80
• /
• 2018

The path and visibility of nurses in general hospital wards have been treated as architectural planning factors. However, the analysis approach of existing studies shows limitations that only fixed physical elements are considered without considering the behavior of users using space. Consider factors for analysis of ward and models based on this study model. Select a case hospital to apply the analysis technique and conduct the nurse questionnaire and route survey of the hospital. Establish a framework for analysis model applied with the path of nurse movements. The analysis model applies to the case hospital. The analysis results are aggregated to derive design suggestion for reference to the spatial improvement of the ward. Visible visibility to observe the bedside in the nursing station, visibility to observe the beds in the nurse's path, and visibility to observe patients moving in the nurse's path were derived from visual access frequency and exposure frequency. The survey of nurses' movements at the site allowed the nurses to calculate the distance required to move. Reflecting the path of nurse movement, a model was presented for a comprehensive analysis of nursing distance and nursing visibility, which could lead to improvement in the observation and visibility of nurses and the layout of patient rooms or day rooms.

• Journal of the Korea Institute of Building Construction
• /
• v.4 no.2
• /
• pp.105-112
• /
• 2004

The objective of this study is to observe today's situation and direction in relation with the natural air-conditioning and heating system to expand the architectural utilization of natural management for human comfort and energy conservation in architectural design. Also this study to provide the fundamental knowledge and. design-techniques on environment-friendly architecture in connection with 'natural idea in architecture'. In accordance with this intention, this thesis is composed of the following contents : 1) to understand the fundermental concepts about natural air-conditioning and heating system, 2) to review the traditional characteristics in Korean and Southeast Asian architecture related to natural air-conditioning and heating system, 3) to examine modern design-techniques in relation with natural air-conditioning and heating system in the selected area, 4) to attempt to synthesize the whole situation. Environment-friendly architecture using natural ideas and design-techniques in architecture is very important architectural aspect in a current architecture, also for the future. In spite of general considerations, it is expected that this study is use to understand the principle and practical application of natural air-conditioning and heating system in architectural design.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2008.04a
• /
• pp.303-307
• /
• 2008

For the recently constructing building, diverse forms of attempt are being applied with the environmental-friendly design and reflection of the design factor by environment simulation. Especially, in case of Multi-Purpose Hall, in view of its use-purpose and because of the characteristics that should be utilized as the multipurpose uses by well-mingled together with the lecture-wise factor and musical factor, now it could be said that the sufficient examination and planning with regard to the acoustic factor are essential. On such viewpoint, as the object of practically planning multipurpose auditorium, this Study has intended to design such auditorium equipped with the optimal architectural acoustic factor, for the acoustic condition using Acoustic Simulation Technique at the planning stage.

• Journal of the Regional Association of Architectural Institute of Korea
• /
• v.21 no.5
• /
• pp.161-168
• /
• 2019

The use of various digital tools makes freeform modeling possible. At the same time, with the development of structural and construction technologies, Free-Form Architecture are beginning to be implemented realized, as the desired data extraction such as the size and coordinate points of the members is possible. Currently, in many cities around the world, Irregular-Shaped High-rise Buildings, which express the dynamic symbolism, are recognized for their landmark values. In order to realize the Irregular-Shaped High-rise Buildings, it is necessary to understand various fields such as the characteristics of digital tools, digital technique logic, design process, and construction method. In particular, it is important to plan Irregular-Shaped High-rise Buildings so that the various types of efficiency can be reviewed together, while generating understanding and formations from the initial design stage. Therefore, this study uses conceptual and parametric design tools related to form generation in digital architecture to analyze the details, methods, and characteristics of the Irregular-Shaped High-rise Buildings form generation process. In this paper, the parametric design tool is applied to study the various types of design and the process characteristics that can be considered in the initial design stage of the unstructured skyscraper.

• International conference on construction engineering and project management
• /
• 2015.10a
• /
• pp.339-343
• /
• 2015

To rapidly recover ceased functionality of a facility after a catastrophic seismic event, critical decisions on facility repair works are made within a limited period of time. However, prolonged damage assessment of facilities, due to massive damage in the surrounding region and the complicated damage judgment procedures, may impede restoration planning. To assist reliable structural damage estimation without a deep knowledge and rapid interactive analysis among facility damage and restoration operations during the approximate restoration project planning phase, we developed a prototype of distributed facility restoration simulations through the use of high-level architecture (HLA) (IEEE 1516). The simulation prototype, in which three different simulations (including a seismic data retrieval technique, a structural response simulator, and a restoration simulation module) interact with each other, enables immediate damage estimation by promptly detecting earthquake intensity and the restoration operation analysis according to estimated damage. By conducting case simulations and experiments, research outcomes provide key insights into post-disaster restoration planning, including the extent to which facility damage varies according to disaster severity, facility location, and structures. Additional insights arise regarding the extent to which different facility damage patterns impact a project's performance, especially when facility damage is hard to estimate by observation. In particular, an understanding of required type and amount of repair activities (e.g., demolition works, structural reinforcement, frame installation, or finishing works) is expected to support project managers in approximate work scheduling or resource procurement plans.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.35 no.12
• /
• pp.13-20
• /
• 2019

The purpose of this study was to investigate the effects of visual properties on the human movement behavior experimentally and empirically using spatial analysis technique based on ecological perception theory. For the survey of choosing behaviors of heading direction in built environments, the experiment was conducted in which the subjects were made to choose moving directions in some spaces using the virtual environment simulation tool, and then comparative analysis was conducted on the interrelation between the experiment results and various visual properties in existing spatial analysis techniques based on ecological perception theory. As a result, the occlusivity of the isovist theory was found to be the most significant index in the human choice of heading direction, and the longest radial also showed somewhat significant effect on it.