• Architectural research
• /
• 제15권3호
• /
• pp.111-121
• /
• 2013

This paper examines the interdisciplinary practice within design realms including urban planning, architecture, landscape architecture and interior design. It discusses the pedagogical approaches at design schools to foster designers capable of design challenge with interdisciplinary skills. As the complexity of contemporary multicultural society increasingly requires a higher level of expertise in professional service, no individual designer can be expert in all fragmented expertise across the whole design and associated engineering areas. A designer, therefore, should rely on the expertise of other practitioners in areas where he or she doesn't possess proficiency and educational background. From this sense the need of interdisciplinary approaches across diverse range of design and engineering through the collaboration is rising. Historically most of discussion made on interdisciplinary approaches is limited to collaboration between architecture and supporting engineering. This paper focuses on the collaboration with design realms. Three case studies done in an interdisciplinary firm are explored, focusing on design process that is non-linear and complementary. Finally the integrative pedagogical approaches to provide students with more exposure to allied disciplines are navigated with exemplary student work from interdisciplinary design studio.

• Steel and Composite Structures
• /
• 제8권5호
• /
• pp.389-402
• /
• 2008

In December 2005, one(A) of the two pre-engineered warehouse buildings in the port of K City of Korea was completely destroyed and the other(B) was seriously damaged to be demolished. Over-loaded snow and unexpected blast of wind were the causes of the accident and destructive behavior was brittle fracture caused by web local buckling and lateral torsional buckling at the flange below rafter. However, the architectural design technology of today based on material non-linear method does not consider the tolerances to solve the problem of such brittle fracture. So, geometric non-linear evaluation which includes initial deformation, width-thickness ratio, web stiffener and unbraced length is required. This study evaluates the structural safety of 4 models in terms of width-thickness ratio and unbraced length using ANSYS 9.0 with parameters such as width-thickness ratio of web, existence/non-existence of stiffener and unbraced length. The purpose of this study is to analyze destructive mechanism of the above-mentioned two warehouse buildings and to provide ways to promote the safety of pre-engineered buildings.

• 교육녹색환경연구
• /
• 제12권3호
• /
• pp.50-57
• /
• 2013

The education of building services field at university is not enough, although the field has become to be very important in architectural engineering. This lack of education is one of the reason that the level of domestic building services field is lower than that in developed countries. Present conditions of related laws, fields of work after graduation and education at university in building services field have been studied, and education conditions have been investigated divided into four-year architectural engineering course and five-year architecture course. Though building services field has become more important at university education, the number of credits and professor of the field is still small than other fields of architectural engineering. More practical curriculums are necessary to meet the expectation of companies, and it will be one of the method to meet it that criteria of curriculum constitution is according to ABEEK(Accreditation Board for Engineering Education of Korea) in more architectural engineering department.

• Earthquakes and Structures
• /
• 제5권3호
• /
• pp.261-276
• /
• 2013

Oil, hysteretic and inertial mass dampers are representatives of passive dampers used for smart enhancement of seismic performance of building structures. Since oil dampers have a nonlinear relief mechanism and hysteretic dampers possess nonlinear restoring-force characteristics, several difficulties arise in the evaluation of buildings including such dampers. The purpose of this paper is to propose a practical method for simultaneous optimal use of such dampers. The optimum design problem is formulated so as to minimize the maximum interstory drift under design earthquakes in terms of a set of damper quantities subject to an equality constraint on the total cost of dampers. The proposed method to solve the optimum design problem is a successive procedure which consists of two steps. The first step is a sensitivity analysis by using nonlinear time-history response analyses, and the second step is a modification of the set of damper quantities based upon the sensitivity analysis. Numerical examples are conducted to demonstrate the effectiveness and validity of the proposed design method.

• 한국CDE학회논문집
• /
• 제20권2호
• /
• pp.133-144
• /
• 2015

Introduction of BIM(Building Information Modeling) was led by public institutions, and all buildings over a certain size were obligated to apply BIM. However, through various attempt to apply BIM to actual practice, people had doubt whether it is a usable technology in reality appeared. Therefore, this study investigated cases about implementation strategies of foreign countries, and conducted survey on BIM performances and preparation in architectural design firms. On the basis of this, it suggests the long-term development strategy of BIM and the basic direction of road map to adopt BIM effectively to domestic architectural design market. After considering the cases abroad and the results of survey, it is identified that incentive policies supporting finance and education should be carried out together with partially obligation method led by government in order to introduce BIM into architectural design market effectively by reflecting current situation of architectural design firms.

• Earthquakes and Structures
• /
• 제20권3호
• /
• pp.309-323
• /
• 2021

Architectural design decisions and structural systems arrangements affect their earthquake behaviors significantly of reinforced concrete building in Turkey. Because the performances as safe and economical against earthquake loads of reinforced concrete buildings can be provided with especially design decisions in the architectural design stage. This matter reveals the importance of design decisions in the architectural design phase and the right structural system arrangement. The purpose of this study, the short-column situation frequently observed in reinforced concrete buildings after the earthquakes occurred in Turkey are to examine comparatively the effects on behavior and the rough construction cost of the building. The obtained results show that the short column circumstance composed due to different reasons negatively affects the earthquake performance of the reinforced concrete buildings and increases the rough construction cost. This matter shows that the measures to be taken against short column formation should be foreseen especially at the architectural design stage.

• Wind and Structures
• /
• 제37권2호
• /
• pp.117-131
• /
• 2023

Korea Design Standard (KDS) will be updated with two major revisions on the assessment of wind load and performance-based wind design (PBWD). Major changes on the wind load assessment are the wind load factor and basic wind speed. Wind load factor in KDS is reduced from 1.3 to 1, and mean recurrence interval (MRI) for basic wind speed increases from 100 years to 500 years considering the reduction of wind load factor. Additional modification is made including pressure coefficient, torsional moment coefficient and spectrum, and aeroelastic instability. Combined effect of the updates of KDS code on the assessment of wind load is discussed with the case study on the specified sites and building. PBWD is newly added in KDS code to consider the cases with various target performance, vortex-induced vibration, aeroelastic instability, or inelastic behavior. Proposed methods and target performance for PBWD in KDS code are introduced.

• 한국멀티미디어학회논문지
• /
• 제18권5호
• /
• pp.641-651
• /
• 2015

This study intends to develop an evacuation simulation system based on BIM in a real-time manner. The proposed system, an add-on module for Revit Architecture and one of the most popular BIM authoring tools, supports the architectural design as well as real-time evacuation simulation of the design alternatives. This paper introduces the developed system, named SafeBIM, and the design process on which it is based. To evaluate the possibilities of the proposed system in the educational field of architectural design, this study included a feasibility test with college students in an architectural design studio.

• 한국산학기술학회논문지
• /
• 제11권4호
• /
• pp.1381-1390
• /
• 2010

본 연구는 최근에 적용되고 있는 다양한 설계 기법과 최근의 동향을 행정중심도시 설계안들을 통해 조명해보고자 한다. 왜냐하면 행정중심도시가 가장 최근에 실시된 주거단지 현상설계이며, 우리나라 주거단지 계획을 선도하는 대표적인 설계사무소와 건설 회사들이 참여했기 때문이다. 따라서 이 공모안들에 다양한 계획 개념들이 사용되었을 것이라 여겨지며, 이러한 분석과 평가는 향후 공동 주택의 설계 향상을 위해서도 도움이 될 것이다.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2009년도 춘계학술발표대회 논문집
• /
• pp.256-262
• /
• 2009

Purpose of this study is embody the environmental-friendly military facility model that applied renewable energy, passive design method and high efficiency equipment. In the introduction of this study, defined problem of existing military facility and classification of military facility are performed. Also, environmental friendly military facility is defined through classified by scale and building equipment method. In the renewable energy chapter, photovoltaic system and wind turbine system are considered And then, LED light, photovoltaic panel, motor, inverter are analyzed in the high efficiency equipment chapter.