• Journal of Yeungnam Medical Science
• /
• 제29권1호
• /
• pp.61-64
• /
• 2012

The left aortic arch with an aberrant right subclavian artery, or arteria lusoria, is the most common aortic arch anomaly, occurring in 0.5-2.5% of individuals. In such cases, the angular course of the arteria lusoria to the ascending aorta imposes difficulty in passing a guide wire to the ascending aorta during right transradial catheterization. Here, the case of a 53-year-old woman with intermittent chest tightness and coughing is reported. Aberrant right subclavian artery (arteria lusoria) was diagnosed via aortogram during right transradial coronary angiography. Compression of the esophagus and trachea by the aberrant right subclavian artery was demonstrated by chest computed tomography (CT).

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1989년도 춘계학술대회
• /
• pp.9-12
• /
• 1989

A preliminary study has been conducted to demonstrate the effect of laser heat treatment on Ni Ti alloy dental arch wires ($0.016"\;{\times}\;0.022"$ and $0.018"\;{\times}\;0.026"$, rectangular shape). Changes in mechanical and thermal properties and surface morphologies are investigated by using optical and scanning electron microscope (SEM), energy dispersive x-ray microprobe analysis(EDX), differential scanning calorimeter (DSC), and micro hardness tester. The results indicate that the laser can affect the thermal equilibrium state of the localized surface. Titanium rich surface film is formed by the laser treatment. The surface film and rapidly resolidified underlying structures show better chemical resistance than the matrix material. Phase transition temperatures which are related to shape recovery temperatures are changed after laser treatment. Hardness of resolidified area and heat affected zone are lower than before treatment.

• 대한치과교정학회지
• /
• 제34권6호
• /
• pp.481-487
• /
• 2004

본 연구의 목적은 한국인 정상교합자에서 하악치열궁의 형태적 차이를 알아보고자 하였다. 한국인 102명의 정상교합자를 대상으로 하악 모형의 교합면을 복사한 후 13개의 접촉점중에서 가장 협측으로 위치한 부분을 digitize하였고 각 치아의 브라켓위치에 해당하는점을 하악치아의 두께에 의거하여 4개의 선계측과 2개의 비율을 측정하였다. 치열궁의 형태를 square, ovoid, tapered from으로 분류하여 그 빈도를 남녀성별에 따라 비교한 결과 특이한 차이점을 보이 지 않았으나 대구치간 폭경에서는 남녀 성별의 차이를 보였다. 정상교합자에서 치열궁 형태분포는 ovoid, square, tapered순 이었고 tapered arch from은 $10\%$미만이었다. 치열궁 형태의 빈도분포에 있어서 남녀간의 차이는 없었다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제24권2호
• /
• pp.94-102
• /
• 2020

프리캐스트 콘크리트의 장점과 및 석조 아치의 거동을 접목한 콘크리트 패널 분절 아치 시스템은 가설재가 불필요한 시공성을 확보할 수 있는 경제적 시공법이다. 분절된 프리캐스트 콘크리트 패널의 연속 배치로 구성된 아치는 인양 및 시공을 위한 V형-스트립 연결부의 선설치 앵커 설치가 필수적이다. 그러나 좁은 폭과 얇은 두께의 콘크리트 패널은 선설치 앵커의 충분한 묻힘 깊이 확보를 보장할 수 없고 앵커 인발 거동 시 패널의 휨변형을 동반하는 등 앵커 저항성능 확보를 위한 콘크리트 패널의 기하학적 영향이 고려되어야 한다. 따라서 본 연구에서는 프리캐스트 패널과 강재 아웃리거로 구성된 아치구조의 제작시 설치되는 선설치 앵커의 인발 강도 평가를 위한 실험 연구를 수행하였다. 이를 위해 실제 아치 시스템과 동일한 크기의 프리캐스트 콘크리트 패널을 제작하였으며, 선설 앵커의 직경, 앵커 묻힘 깊이, 와이어 매쉬 사용 등의 영향에 따라 총 24개 실험체의 선설치 앵커 인발 강도를 측정하였다. 또한 측정 변수에 따른 설계기준강도 확보 및 파괴 모드 평가를 통해 프리캐스트 콘크리트 패널 분절 아치 구조에 적용 가능한 선설치 앵커의 형태를 결정하였다.

• 대한치과교정학회지
• /
• 제16권1호
• /
• pp.155-165
• /
• 1986

Recently, straight-wire appliance is widely used with great concern in clinical orthodontic field. The purpose of this study was to collect the information of the straight-wire appliance and to determine the crown inclination in clinical orthodontics. The author analyzed the study model of 78 individuals with normal occlusion. The obtained results were as follows. 1. Mean, maximum value, minimum value and standard deviation of crown inclination of upper and lower teeth were obtained. 2. The lingual crown inclination of upper tooth had constant value from first premolar through second molar, the lingual crown inclination of lower tooth progressively increased from canine through second molar. 3. As Howes' ratio was decreased, the crown inclination of upper incisors was increased. 4. Narrowing the upper arch, the crown inclination of upper incisors was increased.

• Restorative Dentistry and Endodontics
• /
• 제39권3호
• /
• pp.226-229
• /
• 2014

Orthodontic extrusion is usually performed by means of a fixed orthodontic appliance that utilizes arch wire attached to adjacent teeth and transfers the desired force by elastic from the wire to the root. However, clinicians often encounter cases where the bonding required for tooth traction is not possible because the adjacent teeth have been restored with ceramic or veneer. The purpose of this case report is to describe a modified orthodontic extrusion appliance that is useful when conventional orthodontic treatment is not possible. The modified appliance was fabricated using an artificial tooth, clear plastic sheeting, and a braided fiber-reinforced composite strip that covered adjacent teeth without bonding. It satisfied the esthetic and functional needs of the patient and established the optimal biologic width.

• 대한치과교정학회지
• /
• 제21권3호
• /
• pp.495-500
• /
• 1991

To design the acceptable prejusted bracket for Korean using straight wire appliance, teeth and dental arch of Korean were studied and brackets were made. It was named Oriental Bracket. The results were following. 1. The bracket position for Korean occlusion was obtained. 2. The axial inclinations of each tooth were obtained. 3. The crown torques of each tooth were obtained. 4. The thickness of each tooth was obtained. 5. The bracket (Oriental bracket) was made according to these data.

• 대한치과의사협회지
• /
• 제37권7호통권362호
• /
• pp.530-535
• /
• 1999

Detailed finishing of the occlusion is a clinical skill that has become difficult with the development of fixed appliances. Accuracy of bracket placement definitely improves with indirect technique, Several methods for the placement of orthodontic brackets on dental casts are currently used in the indirect bonding technique. These include attachment by means of bonding resins, adhesive tapes or sticky wax. This article presents the indirect procedures of our clinic, which use paste-paste chemically cured composites. Detailed laboratory and clinical procedure for dual tray method and other application of indirect bonding will be presented.

• 대한기계학회논문집A
• /
• 제24권4호
• /
• pp.907-915
• /
• 2000

The movement of teeth and initial stress associated with the treatment of orthodontics have been successfully studied using the finite element method. To reduce the effort in preprocessing of finite element analysis, we developed two types of three-dimensional finite element models based on the standard teeth model. Individual malocclusions were incorporated in the finite element The movement of teeth and initial stress associated with the treatment of orthodontics have been successfully studied using the finite element method. To reduce the effort in preprocessing of finite element analysis, we developed two types of three-dimensional finite element models based on the standard teeth model. Individual malocclusions were incorporated in the finite element models by considering the measuring factors such as angulation, crown inclination, rotation and translations. The finite element analysis for the wire activation with a T-loop arch wire was carried out. Mechanical behavior on the movement and the initial stress for the malocclusion finite element model was shown to agree with the objectives of the actual treatment. Finite element models and procedures of analysis developed in this study would be suitably utilized for the design of initial shape of the wire and determination of activation displacements.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제17권2호
• /
• pp.171-179
• /
• 1995

The conservative treatment of the condylar fracture has been used for a long time because of its simplicity, good prognosis and less complication. Traditionally the conservative treatment has been carried out by maxillomandibular fixation using arch bar and wire. But a simplified technique of maxillomandibular fixation introduced here is a procedure that 4 bone screws are placed above the apecies of the maxillary and mandibular canines and then ipsilaterally placed maxillary and mandibular bone screws are linked by a loop of wire each other. This procedure has several advantages compared with the traditional maxillomandibular fixation method. 1) it provides simplicity for the operators. 2) it sustains maxillomandibular fixation more rigidly compared with arch bar technique. 3) it keeps stable maxillomandibular fixation in the region of the anterior teeth so that anterior open bite tendency can be remarkably minimized. 4) it does not injure the periodontal tissue because the teeth are not engaged and causes less discomfort to the patient. 5) it decreases the possibility of operator's AIDS infection through inadvertent skin puncture. 6) it is highly recommended for the patients whose teeth are available for maxillomandibular fixation. The two male patients were diagnosed as bilateral condylar and symphyseal fracture of the mandible. They restored stable occlusion and functional mandibular movement only by a simplified technique of maxillomandibular fixation.