• 구강회복응용과학지
• /
• 제21권1호
• /
• pp.83-93
• /
• 2005

This study was designed to investigate the fitness of adjustable dental impression trays. The size and shape of these trays were designed from the results of the dental arch size of Korean adults. Tray samples were made by CAD-CAM working. A hundred dental students(male:50, female:50) were selected for taking irreversible hydrocolloid impression using these trays. The author measured the width and length of impression material on the several measuring points. The results obtained were as follows : 1. Uniform impression material thickness was achieved by controlling the width of the tray using stops and beveled guides. 2. In the upper tray, the impression material thickness was measured to be rather great showing thickness of the labial vestibule 8.3 mm and the midpalatal part 8.6 mm. 3. In the lower tray, length of the impression material of the labial vestibule of first, second premolar contact point was 7.8 mm, and thickness of the lingual part of premolars(1.8 mm) and molars(1.9 mm) showed small values. 4. In the lower tray, the impression material thickness of the buccal shelf area(0.2 mm) and the retromolar pad area(0.6 mm) was measured to be too small.

• 한국의류학회지
• /
• 제41권3호
• /
• pp.420-432
• /
• 2017

This study examined user needs for compression pant development for women with pes planus in their 50s and 60s. A total of 355 women aged 50 to 69 participated in the survey and interview. Questions were asked if they had pes planus, the using condition of foot orthotic, inconveniences during gait, and wearing condition of compression pants. The results showed that 42 (11.8%) women had pes planus. Orthotic insole and arch support were used most frequently. The most uncomfortable aspect of foot orthotic (n=146) was that it was difficult to use unless they were going outside. Participants with pes planus responded that they felt discomfort on the inner area of propodium, metatarsus, ankle, and knee during gait. The purchase and wearing rate of compression pants were not high; however, compression pants were purchased with specific needs and purposes. Respondents mainly wore the compression pants for sports activities. M size was the most frequently worn size. They preferred high waist type leggings and there was a need to increase the compression strength of the waist, thigh, knee and ankle. Additionally, the ease of donning and doffing were discussed.

• Journal of Korean Dental Science
• /
• 제15권2호
• /
• pp.132-140
• /
• 2022

Purpose: Dental diagnostic records derived from study models are a popular method of obtaining reliable and vital information. Conventional plaster models are the most common method, however, they are being gradually replaced by digital impressions as technology advances. Moreover, three-dimensional dental models are becoming increasingly common in dental offices, and various methods are available for obtaining them. This study aimed to evaluate the accuracy of the measurement of dental digital models by comparing them with conventional plaster and to determine their clinical validity. Materials and Methods: The study was conducted on 16 patients' maxillary and mandibular dental models. Tooth size (TS), intercanine width (ICW), intermolar width (IMW), and Bolton analysis were taken by using a digital caliper on a plaster model obtained from each patient, while intraoral scans were manually measured using two digital analysis software. A one-way analysis of variance test was used to compare the dental measurements of the three methods. Result: No significant differences were reported between the TS, the ICW and IMW, and the Bolton analysis through the conventional and two digital groups. Conclusion: Measurements of TS, arch width, and Bolton analysis produced from digital models have shown acceptable clinical validity. No significant differences were observed between the three dental measurement techniques.

• Journal of Oral Medicine and Pain
• /
• 제23권4호
• /
• pp.457-473
• /
• 1998

This study was performed to investigate the morophological and positional correlation between the upper cervical vertebra, the oral structures and the pharyngeal tissues, and the correlation of these anatomical structures with dental features, such as teeth wear area nad tooth contact status, etc. Seventy patients with temporamandibular disorders and sixty three dental students without any signs and symptoms in head and neck region were selected for this study. All they had natural dentition without any fixed and removable protheses. Teeth wear area and arch width wre measured from the upper dental cast, tooth contact status were observed by T-Scan system$^\textregistered$ and four cephaloradiograpohs were taken from four head postures, namely, natural(NHP), forward(FHP), upward(UHP), and downward head postiure(DHP). 22 cephalometric items were measured on the films and the data were processed with SAS statistical program. The result of this study were as follows : 1. In normal group, angle of cervical vertebra tangent and of between hard and soft palate were broader in female subjects than those in male subjacets, but distance from subocciput to axis, size of soft palate, and pharyngeal space width were larger in male subjects. 2. In normal group with natural head posture, the items correlated each others from the three anatomical regions were distance between first nad second vertebra in posterior part, distance from the lingual surface of lower anterior teeth to anterior surface of soft palate, and distance from the hyoid bone to third vertebra. 3. Three set of items showed significant correlation each other in the four head postures in normal group. First set was the angle between hard and soft palate and the idstance from subocciput to posterior arch of first vertebra, second set was the distance between first and second vertebra in posterior part and the teeth wear area, third set was number and force of tooth contact and length of soft palate and distance from anterior tip of hyoid bone to mandibular plane.

• 한국지반공학회논문집
• /
• 제15권4호
• /
• pp.261-277
• /
• 1999

고랑형태로 좁게 굴착된 되메움 공간에 대한 수평 및 연직 토압은 굴착면과 되메움 흙과의 벽면마찰 및 고랑식 되메움공간의 형상에 따라 그 영향을 받는다. 본 연구에서는 대칭수직 굴착면에 대한 Handy의 제안식 및 대칭경사굴착면에 대한 Kellogg의 식을 수정하여 비대칭 굴착형상의 되메움 공간에 대한 수정식과 최소주응력아치 형태를 나타내어 보였다. 수정된 식은 모형토조 실험결과와 비교하였을 때 되메움 토압의 크기, 분포 등 그 경향이 매우 유사하였으며 비대칭으로 경사진 공간에서의 되메움 토압이 대칭적으로 수직하게 굴착된 공간에서의 토압보다 2배 이상의 큰 크기와 현저한 아칭현상의 저하를 보였다. 본 연구와 유사한 현장의 구조물에 미치는 토압을 산정할 때 되메움 공간의 형상 및 크기 등을 고려한 토압산정식이 적용되어져야 할 것으로 확인되었다.

• Applied Microscopy
• /
• 제39권4호
• /
• pp.319-324
• /
• 2009

농어 아가미는 새파, 새궁, 새엽 및 새판으로 구성되어 있었다. 위쪽 새파수는 7~10개이며, 아래쪽 새파수는 13~18개로 조사되었다. 농어 아가미의 주요부위인 새엽과 새판(이차새엽)을 광학현미경과 투과전자현미경에서 관찰한 결과는 다음과 같다. 농어 아가미는 새궁(gill arch) 외연의 앞 뒤 2열로 된 긴 점막성의 빗살과 같은 모양으로 줄지어 있는 많은 수의 새엽(gill filament)을 가지고 있으며, 각 새엽은 전후 두개의 새판(gill lamellae)이 근접하여 두 열로 배열되어 있었다. 농어의 새판은 pavement cell, 기둥세포(pillar cell), 혈구세포, 점액세포(mucose cell) 및 염류세포(chloride cell) 등으로 구분되었다. 새판의 표면은 단층으로 큰 핵을 가진 pavement 세포로 구성되며, 상피표면의 glycocalyx로 덮혀진 미세융기를 가진다. 그리고 새판은 기둥세포와 혈구세포와 일정한 간격을 두고 분포하고 있었다. 점액세포는 새판에 드문드문 나타났지만 새엽에 많이 분포하고 있으며, 염류세포는 미토콘드리아와 tubular system이 잘 발달되어 있었다.

• 한국광학회지
• /
• 제13권1호
• /
• pp.1-8
• /
• 2002

지구관측위성의 해상도가 정밀해 짐에 따라 광학 탑재체 즉 카메라의 구경이 대구경화 되고 있으며, 이에 따라 발사 및 운용환경에서 주어진 광학성능을 만족하는 설계/가공/조립과 함께 광학계의 경량화가 주요 요구 사항이 되어졌다. 반사경은 수차 및 광경로 등의 광학적 이유와 가공성 등의 이유로 대구경 광학계에서 사용되고 있으며, 위성용 광학계의 경량화의 상당 부분이 반사경 경량화를 통하여 이뤄지고 있다. 본 논문에서는 직경 30cm의 플랫 백, 싱글 아치, 더블 아치, 벌집 샌드위치 반사경에 대하여 위성용 반사경의 주요 형상 변형 요인을 대표할 수 있는 구조해석과 열 해석을 동시에 수행하여 각 반사경의 변형을 구하였고 광학 성분(Zernike다항식)과 이의 효과를 분석하였다. 더 나아가, 이러한 결과와 비례의 법칙 및 Valente의 무게 예상 공식을 사용하여 직경이 300-1000mm가지의 반사경의 기계변형을 추정하였으며, 이를 바탕으로 네 가지 모델의 적용 가능 구간 및 자동초점기능을 적용하였을 때의 성능향상을 계산하였다.

• 한국농공학회논문집
• /
• 제47권3호
• /
• pp.29-37
• /
• 2005

This study was carried out to file up structural design data for optimizing Pleurotus eryngii growing houses. Design data are including current farm status of Pleurotus eryngii growing houses in the aspect of structural configuration as well as environmental conditions to be controlled and maintained inside. A structural analysis was performed for the on-farm structures as well as some structures modified and suggested through field survey and analysis. The results are summarized as follows. According to the results of status analysis, Pleurotus eryngii growing houses were categorized as arch-roofed simple type and sandwich panel type. Though the size of Pleurotus eryngii cultivation facilities were considerably diverse, the basic dimensions of Pleurotus eryngii cultivation facilities showed relatively similar pattern: more or less of 20m of length, $6.6\~7.0m$ of width, $4.6\~5.0m$ of peak height, $1.2\~1.6m$ of bed width, and 4 layers of bed. In the aspect of spatial use of cultivation facilities, suggested models were shown to be mostly reasonable in the aspect of heating and cooling, micro-meteorological stability, land use efficiency per unit floor area, etc.. Especially, the standard models suggested so far were thought to be not efficient in its surface area and spatial volume per unit floor area as well as its uneffective structural design in the area around ceiling. In the results of structural analysis for the models suggested through this study by using those section frames to be found on farms, the panel type structures of both single span and double span were estimated to be over designed, whereas arch-roofed pipe houses were mostly found to be under-designed.

• 대한치과교정학회지
• /
• 제45권4호
• /
• pp.190-197
• /
• 2015

Objective: The aim of the study was to analyze the prevalence and distribution of ectopic eruption of the permanent maxillary first molar (EEM) in individuals scheduled for orthodontic treatment and to investigate the association of EEM with dental characteristics, maxillary skeletal features, crowding, and other dental anomalies. Methods: A total of 1,317 individuals were included and randomly divided into two groups. The first 265 subjects were included as controls, while the remaining 1,052 subjects included the sample from which the final experimental EEM group was derived. The mesiodistal (M-D) crown width of the deciduous maxillary second molar and permanent maxillary first molar, maxillary arch length (A-PML), maxillomandibular transverse skeletal relationships (anterior and posterior transverse interarch discrepancies, ATID and PTID), maxillary and mandibular tooth crowding, and the presence of dental anomalies were recorded for each subject, and the statistical significance of differences in these parameters between the EEM and control groups was determined using independent sample t -tests. Chi-square tests were used to compare the prevalence of other dental anomalies between the two groups. Results: The prevalence of maxillary EEM was 2.5%. The M-D crown widths, ATID and PTID, and tooth crowding were significantly greater, while A-PML was significantly smaller, in the EEM group than in the control group. Only two subjects showed an association between EEM and maxillary lateral incisor anomalies, which included agenesis in one and microdontia in the other. Conclusions: EEM may be a risk factor for maxillary arch constriction and severe tooth crowding.

• 정보처리학회논문지B
• /
• 제10B권5호
• /
• pp.497-502
• /
• 2003

지문의 분류(Classification)는 대용량 지문 데이터베이스에서 정합시간의 단축과 정확도를 높여주는 역할을 한다. 지문의 종류는 크게 궁상문, 솟은 궁상문, 좌제상문, 우제상문, 와상문의 5종류로 분류되며, 이는 중심점과 삼각점의 개수 및 위치등을 이용하여 분류하고 있다. 기존의 지문 분류는 중심점과 삼각점을 모두 획득하는 회전날인의 경우에 사용 가능한 분류방법이나 현대의 자동화된 실시간 지문인식 시스템에서는 입력센서의 크기 및 입력방법의 문제등으로 인하여 적용할 수 없는 문제점이 있다. 본 논문에서는 이러한 문제점을 해결하기 위하여, 중심점을 획득한 지문을 이용하여 중심점에서 융선의 엔트로피 계측을 기반으로 하며 지문 분류의 정확성을 향상시킬 수 있는 방법을 제안하고 실험을 통하여 이를 증명한다.