• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2005년도 학술발표회 논문집
• /
• pp.145-152
• /
• 2005

This paper presents a deformable strut-and-tie model of determining the shear strengths and ultimate deformations of the shear-dominant reinforced concrete members. The proposed model originates from the strut-and-tie model concept and satisfies equilibrium, compatibility, constitutive laws, and the geometric conditions of shear deformation. This study attempts to apply deformation patterns to strut-and-tie models. The yielding of flexural reinforcements determines yielding states and the ultimate states of reinforced concrete coupling beam are defined as the ultimate compressive strain of struts and the degradation of compressive strength due to principal tensile strain of struts. The validity and accuracy of the proposed model is then tested against available experimental data. The parameters reviewed include the ratios of truss action and arch action, the reinforcement ratios, and the shear span-depth ratio. It is expected that this model can be applied to displacement-based design methods.

• Steel and Composite Structures
• /
• 제36권3호
• /
• pp.261-272
• /
• 2020

A novel precast concrete-encased steel composite beam, which can be abbreviated as PCES beam, is introduced in this paper. In order to investigate the shear behavior of this PCES beam, a test of eight full-scale PCES beam specimens was carried out, in which the specimens were subjected to positive bending moment or negative bending moment, respectively. The factors which affected the shear behavior, such as the shear span-to-depth aspect ratio and the existence of concrete flange, were taken into account. During the test, the load-deflection curves of the test specimens were recorded, while the crack propagation patterns together with the failure patterns were observed as well. From the test results, it could be concluded that the tested PCES beams could all exhibit ductile shear behavior, and the innovative shear connectors between the precast concrete and cast-in-place concrete, namely the precast concrete transverse diaphragms, were verified to be effective. Then, based on the shear deformation compatibility, a theoretical model for predicting the shear capacity of the proposed PCES beams was put forward and verified to be valid with the good agreement of the shear capacities calculated using the proposed method and those from the experiments. Finally, in order to facilitate the preliminary design in practical applications, a simplified calculation method for predicting the shear capacity of the proposed PCES beams was also put forward and validated using available test results.

• 한국강구조학회 논문집
• /
• 제22권2호
• /
• pp.173-183
• /
• 2010

본 논문은 I형 강재와 프리캐스트 콘크리트 바닥판으로 구성된 비합성 합성아치 생태교량에 대한 해석 및 실험 연구이다. 범용유한 요소해석 프로그램 ABAQUS(2007)를 사용하여 단위거더, 단위합성거더, 3거더 아치, 3거더 합성아치 등 4종류의 해석모델이 검토되었으며, 해석 결과를 토대로 모델별 거동특성을 분석하고, 3거더 합성아치 모형실험체에 설치될 응력 및 변형률 게이지 위치를 결정하였다. 본 연구의 정적파괴 하중실험에 사용된 실험체는 3개의 I형강 거더와 14개의 PC패널로 구성되어 있다. 모형실험체 정적파괴실험결과로부터 강거더 하부플랜지가 항복응력에 도달하는 시기의 재하하중은 유한요소해석을 통해 얻어진 정적하중과 17%정도의 차이를 나타내고 있으며, 실험체 파괴하중은 1,961kN으로 AASHTO LRFD 교량설계기준 (2007)의 단면 소성모멘트를 이용한 작용가능하중은 1,380kN으로 본 실험체는 충분한 내하력을 나타내고 있다. 해석결과와 실험결과를 토대로 새로운 형식의 비합성 합성아치 교량의 안전성과 강도가 충분히 발휘됨을 확인할 수 있었다.

• 한국터널지하공간학회 논문집
• /
• 제6권1호
• /
• pp.3-16
• /
• 2004

기존의 터널 라이닝으로서 주를 이루고 있는 콘크리트 라이닝은 여러 문제점들이 발생하고 있으며 콘크리트 라이닝의 대제 재료에 대한 관심이 증대되고 있다. 본 논문에서는 파형강판을 개착식 터널 라이닝으로 도입하기 위한 초기 단계에 있어서 파형강판 라이닝의 유한요소 해석을 수행하고 CHBDC (Canadian Highway Bridge Design Code, 2000) 규정에 의해 안정성을 검토한 후 몇 가지 조건에 의해 발생되는 단면력의 경향을 분석함으로서 터널 라이닝으로서의 새로운 재료의 거동 특성을 규명하고자 하였다. 또한 현장에서의 시공 단계를 모사한 1/40 scale의 모형토조 실험과 동일한 scale의 수치해석을 수행하여 본 연구에서 사용한 수치해석 기법의 적정성을 검증하였다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제6권3호
• /
• pp.129-138
• /
• 2002

The purpose of this study is to propose the nonlinear analysis method which combines the nonlinear incremental method with the layered method to solve the problems due to the geometric and the material nonlinearities. As numerical analysis models, the reinforced concrete simple beam and the steel arch frame are used to verify the algorithm of the proposed nonlinear method. The results are gotten from the computation procedures. According to the results of this study, the fracture pattern of the beam according to the ratio of tensile steel and the strength of the concrete and the steel can be estimated by the proposed method. Therefore, the load-deflection curve of structure can be, exactly, depicted by the proposed method. Also, the rupture load, the site and the depth of crack of the beam can analytically be checked by the proposed method. In this respect, the proposed method contributes for the solving the stability problem of the actual structure.

• Advances in concrete construction
• /
• 제13권3호
• /
• pp.243-254
• /
• 2022

Reinforced concrete (RC) deep beams are critical structural elements used in offshore pile caps, rectangular cross-section water tanks, silo structures, transfer beams in high-rise buildings, and bent caps. As a result of the low shear span ratio to effective depth (a/d) in deep beams, arch action occurs, which leads to shear failure. Several studies have been carried out to improve the shear resistance of RC deep beams and avoid brittle fracture behavior in recent years. This study was performed to investigate the behavior of RC deep beams numerically and experimentally with different reinforcement arrangements. Deep beams with four different reinforcement arrangements were produced and tested under monotonic static loading in the study's scope. The horizontal and vertical shear reinforcement members were changed in the test specimens to obtain the effects of different reinforcement arrangements. However, the rebars used for tension and the vertical shear reinforcement ratio were constant. In addition, the behavior of each deep beam was obtained numerically with commercial finite element analysis (FEA) software ABAQUS, and the findings were compared with the experimental results. The results showed that the reinforcements placed diagonally significantly increased the load-carrying and energy absorption capacities of RC deep beams. Moreover, an apparent plastic plateau was seen in the load-displacement curves of these test specimens in question (DE-2 and DE-3). This finding also indicated that diagonally located reinforcements improve displacement ductility. Also, the numerical results showed that the FEM method could be used to accurately predict RC deep beams'behavior with different reinforcement arrangements.

• Steel and Composite Structures
• /
• 제45권2호
• /
• pp.193-204
• /
• 2022

The need for establishing the contribution of pultruded FRP encasements and additional FRP wraps around these encasements to the shear strength and load-deflection behavior of reinforced concrete beams is the main motivation of the present study. This paper primarily focuses on the effect of additional wrapping around the composite beam on the flexural and shear behavior of the pultruded GFRP (Glass Fiber Reinforced Polymer) beams infilled with reinforced concrete, taking into account different types of failure according to av/H ratio (arch action, shear-tension, shear-compression and pure bending). For this purpose, nine hybrid beams with variable shear span-to-depth ratio (av/H) were tested. Hybrid beams with 500 mm, 1000 mm, and 1500 mm lengths and cross-sections of 150x100 mm and 100x100 mm were tested under three-point and four-point loading. Based on the testing load-displacement relationship, ductility ratio, energy dissipation capacity of the beams were evaluated with comprehensive macro damage analysis on pultruded GFRP profile and GFRP wrapping. The GFRP wraps were established to have a major contribution to the composite beam ductility (90-125%) and strength (40-75%) in all ranges of beam behavior (shear-dominated or dominated by the coupling of shear and flexure). The composite beams with wraps were showns to reach ductilities and strength values of their counterparts with much greater beam depth.

• 콘크리트학회논문집
• /
• 제22권1호
• /
• pp.11-18
• /
• 2010

이 연구에서는 변위-기반성능설계 개념에 의해 기존 철근콘크리트 기둥에 대하여 스틸재킷 보강에 의한 내진 성능개선의 성능설계 방법을 제시하였다. 스틸재킷 보강된 철근콘크리트 기둥에 대한 설계 변위 추정을 위해 스틸재킷 보강된 철근콘크리트 부재의 비선형 층상화 세그먼트 해석 모델을 제시하고, 성능기반설계에 의한 성능개선설계를 위하여 목표성능변위 및 설계지진가속도 조건에 대해 직접 변위-기반 설계 방법 및 변위계수법에 의한 내진성능개선 설계 방법을 제시하였다. 적용 예에서 이 방법은 기존 철근콘크리트 기둥과 비교하여 성능개선설계 결과 보강 전에 비해 변위 연성비 및 변위성능에서 크게 개선된 성능설계 결과를 제공해 주었다.

• Steel and Composite Structures
• /
• 제17권6호
• /
• pp.891-906
• /
• 2014

This study aims to present a three dimensional finite element model to investigate the wave propagation in a concrete filled steel tubular column (CFSC) due to transient impact load. Both the concrete and steel are regarded as linear elastic material. The impact load is simulated by a semi sinusoidal impulse. Besides the CFSC models, a concrete column (CC) model is established for comparing under the same loading condition. The propagation characteristics of the transient waves in CFSC are analyzed in detail. The results show that at the intial stage of the wave propagation, the velocity waves in CFSC are almost the same as those in CC before they arrive at the steel tube. When the waves reach the column side, the velocity responses of CFSC are different from those of CC and the difference is more and more obvious as the waves travel down along the column shaft. The travel distance of the wave front in CFSC is farther than that in CC at the same time. For different wave speeds in steel and concrete material, the wave front in CFSC presents an arch shape, the apex of which locates at the center of the column. Differently, the wave front in CC presents a plane surface. Three dimensional effects on top of CFSC are obvious, therefore, the peak value and arrival time of incident wave crests have great difference at different locations in the radial direction. High-frequency waves on the waveforms are observed. The time difference between incident and reflected wave peaks decreases significantly with r/R when r/R < 0.6, however, it almost keeps constant when $r/R{\geq}0.6$. The time duration between incident and reflected waves calculated by 3D FEM is approximately equal to that calculated by 1D wave theory when r/R is about 2/3.

• 콘크리트학회논문집
• /
• 제15권2호
• /
• pp.183-196
• /
• 2003

본 논문에서는 헌치부를 갖는 교각구조물 및 지하철 박스구조물을 선형탄성 평면응력 유한요소해석, 설계기준 및 실험식, 그리고 스트럿-타이 모델 방법을 이용하여 설계하였으며, 설계결과의 비교$.$평가를 통하여 헌치부의 영향 및 설계방법간의 차이를 분석하였다. 또한 헌치부를 갖는 철근콘크리트 부재의 스트럿-타이 모델 설계결과의 신뢰성을 입증하기 위해 실제 실험$.$파괴된 헌치부를 갖는 철근콘크리트 보의 극한강도를 스트럿-타이 모델 해석을 통하여 평가하였다. 극한하중 상태의 거동을 고려하는 스트럿-타이 모델 설계방법은 하중직접전달작용 및 아치작용 등의 헌치부 영향을 나타내는 현상을 교각 및 박스구조물의 설계에 잘 반영하였으며, 따라서 기존의 방법에 의한 교각 및 박스구조물의 설계결과는 스트럿-타이 모델 설계를 통하여 보완되어야 할 것으로 판단된다.