• Journal of Korean Society of Rural Planning
• /
• v.23 no.3
• /
• pp.13-20
• /
• 2017

본 연구는 가나의 비료 보조금 정책(Fertilizer subsidy program: FSP)의 농업 생산성에 대한 영향을 분석하였다. 가나의 군(district) 지역 수준의 농업 생산량 및 투입요소에 대한 자료를 사용하여, FSP 도입 이전과 FSP 도입 이후의 농업 생산성을 계측하였다. 지역적으로 상이한 수준의 농업 생산성을 반영하기 위한 지리적가중회귀(GWR)모형을 사용하여 계측의 오류를 줄이고 공간이질성을 고려하였다. 추정 결과를 바탕으로 ArcMap을 이용하여 생산성을 지도로 시각화 한 자료를 살펴보면, FSP 도입 이후 농업 생산성이 전반적으로 개선되었으며 그 중에서도 생산성이 크게 향상된 지역을 특정할 수 있다. 이러한 공간적 변화는 FSP의 지역적 할당의 효율성 증진을 위한 의사결정 자료로 이용 가능하며, 국내 ODA 추진기관에서 농업 지도 및 지원을 위해 유용한 정보로 사용할 수 있다.

• Proceedings of the KIEE Conference
• /
• 1999.07e
• /
• pp.2242-2244
• /
• 1999

Recently, An important research field of pulsed power is high voltage, high power generation with exploding wire opening switch. Another point of view exploding wire effects have been researched for generation of the pulsed high pressure shock wave. Theoretical considerations of the shock pressure generation along with experiment results are presented in this paper and. Some experimental results of hard rock fracturing show the possibilities of commercial using.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.25 no.6
• /
• pp.42-48
• /
• 2011

Generally, the structure without the stator core Axial Field Permanent Magnet (AFPM) generator was simple and there was nearly no cogging toque. And because it had the wide driving rate area, it had been being mainly used in the small wind power generation system. However, AFPM generator with non-slotted stator can't generate high voltage at low wind speed due to long air-gap. It is the reason of output efficiency drop. Therefore, in this paper, the AFPM synchronous generator with internal rotor and dual slotted stators for the small wind turbine is studied, and deal with a cogging torque minimization through the determination of optimum pole-arc ratio.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.5
• /
• pp.1996-2003
• /
• 2018

In this paper, the design and characteristic analysis of a novel single-phase hybrid switched reluctance motor (HSRM) for the purpose of replacing the universal motor in commercial blenders are presented. The proposed motor is easy to manufacture due to its simple yet robust structure with minimized power switches and no torque dead-zone. Moreover, the proposed HSRM is able to deliver a high starting torque as a requirement for blending hard food or even ice. The stator has permanent magnets (PMs) mounted on its inner surface and the rotor has a wide pole arc and salient poles that contribute to its high starting torque profile and the elimination of the torque dead-zone. Finite element method (FEM) is used to analyze the characteristic of the proposed motor. Finally, the prototype is manufactured and its performance is verified through experiments.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• v.2B no.4
• /
• pp.156-161
• /
• 2002

This paper proposes an optimized universal motor for improving its performance using the finite element method (FEM) with the (1＋1) Evolution Strategy (ES) algorithm. To do this, various design parameters are modified, such as air gap length, shape of motor slot, pole shoe, pole width, and rotor shaft diameter. Two parameters (arc length of stator pole and thickness of pole shoe) are chosen and optimized using the program, and the optimized model is built and tested with a performance measuring system. The measured values of the model are compared with those of the initial and the optimized model to prove the algorithm. As a result, the final model improves its performance compared with those of the initial model.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.209-209
• /
• 2000

Carbon nanotubes have been intensively investigated for its fundamental and technical importances. Structural diversities and the related diverse physical properties with large aspect ratios are fascinating, For instance carbon nanotubes are metal and semiconductors depending on its chirality and furthermore the band gap can be tailored by the diamters. Several issues on its fundamental properties have been discussed. We will review some fundamental problems for band structures, molecular quantum wires, homojunctions, single electron tunneling, and quantum conductance. Several issues related to syntheis of carbon nanotubes including arc discharge, chemical vapor deposition, laser ablation will be extentively discussed. We will further review the applicability of carbon nanotubes on resonator, nanobalance, FET-type transistor, field emission displays electrode for secondary battery and hydrogen storage.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.596-599
• /
• 2004

The robotic $CO_2$ welding is a manufacturing process to produce high quality joints for metal and it could provide a capability of full automation to enhance productivity. Despite the widespread use in the various manufacturing industries, the full automation of the robotic $CO_2$ welding has not yet been achieved partly because the mathematical model for the process parameters of a given welding task is not fully understood and quantified. Several mathematical models to control welding quality, productivity, microstructure and weld properties in arc welding processes have been studied. However, it is not an easy task to apply them to the various practical situations because the relationship between the process parameters and the bead geometry is non-linear and also they are usually dependent on the specific experimental results. Practically, it is difficult, but important to know how to establish a mathematical model that can predict the result of the actual welding process and how to select the optimum welding condition under a certain constraint. In this research, an attempt has been made to develop an intelligent algorithm to predict the weld geometry (top-bead width, top-bead height, back-bead width and back-bead height) as a function of key process parameters in the robotic $CO_2$welding. To achieve this above objective, Taguchi method was employed using five different process parameters (tip gap, gas flow rate, welding speed, arc current, welding voltage) as a guide for optimization of process parameters.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.264-264
• /
• 2013

Strong metal-support interaction effect is an important issue in determining the catalytic ac-tivity for heterogeneous catalysis. In this study, we investigated the support effect and the role of organic capping layers of two-dimensional Pt nanocatalysts on reducible metal oxide supports under the CO oxidation. Several reducible metal oxide supports including CeO2, Nb2O5, and TiO2 thin films were prepared via sol-gel techniques. The structure, chemical state and optical property were characterized using XRD, XPS, TEM, SEM, and UV-VIS spectrometer. We found that the reducible metal oxide supports have a homogeneous thin thickness and crystalline structure after annealing at high temperature showing the different optical band gap energy. Langmuir-Blodgett technique and arc plasma deposition process were employed to ob-tain Pt nanoparticle arrays with capping and without capping layers, respectively on the oxide support to assess the role of the supports and capping layers on the catalytic activity of Pt catalysts under the CO oxidation. The catalytic performance of CO oxidation over Pt supported on metal oxide thin films under oxidizing reaction conditions (40 Torr CO and 100 Torr O2) was tested. The results show that the catalytic activity significantly depends on the metal oxide support and organic capping layers of Pt nanoparticles, revealing the strong metal-support interaction on these nanocatalysts systems.

• Proceedings of the KWS Conference
• /
• 2002.10a
• /
• pp.320-323
• /
• 2002

This paper presents a new generation of system for pressure vessel and shipbuilding. Typical pressure vessel and ship building weld joint preparations are either traditional V, butt, fillet grooves or have narrow or semi narrow gap profiles. The fillet and U groove are prevalently used in heavy industries and shipbuilding to melt and join the parts. Since the wall thickness can be up to 6" or greater, welds must be made in many layers, each layer containing several passes. However, the welding time for the conventional processes such as SAW(Submerged Arc Welding) and FCAW(Flux Cored Arc Welding) can be many hours. Although SAW and FCAW are normally a mechanized process, pressure vessel and ship structures welding up to now have usually been controlled by a full time operator. The operator has typically been responsible for positioning each individual weld run, for setting weld process parameters, for maintaining flux and wire levels, for removing slag and so on. The aim of the system is to develop a high speed welding system with multitorch for increasing the production speed on the line and to remove the need for the operator so that the system can run automatically for the complete multi-torch multi-layer weld. To achieve this, a laser vision sensor, a rotating torch and an image processing algorithm have been made. Also, the multitorch welding system can be applicable for the fine grained steel because of the high welding speed and lower heat input compare to a conventional welding process.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.8
• /
• pp.2185-2189
• /
• 2010

Closely arranged CdSe and Zn doped CdSe vertical nanorod bundles were grown directly on FTO coated glass by using electrodeposition method. Structural analysis by XRD showed the hexagonal phase without any precipitates related to Zn. FE-SEM image showed end capped vertically aligned nanorods arranged closely. From the UV-vis transmittance spectra, band gap energy was found to vary between 1.94 and 1.98 eV due to the incorporation of Zn. Solar cell parameters were obtained by assembling photoelectrochemical cells using CdSe and CdSe:Zn photoanodes, Pt cathode and polysulfide (1M $Na_2S$ + 1M S + 1M NaOH) electrolyte. The efficiency was found to increase from 0.16 to 0.22 upon Zn doping. Electrochemical impedance spectra (EIS) indicate that the charge-transfer resistance on the FTO/CdSe/polysulfide interface was greater than on FTO/CdSe:Zn/polysulfide. Cyclic voltammetry results also indicate that the FTO/CdSe:Zn/polysulfide showed higher activity towards polysulfide redox reaction than that of FTO/CdSe/polysulfide.