• 대한원격탐사학회지
• /
• 제32권6호
• /
• pp.567-577
• /
• 2016

SqueeSAR 분석기법은 SAR 영상내에 있는 고정산란체(PS)와 분산산란체(DS)를 모두 이용하는 새로운 기법이다. 비록 도심지역에는 많은 PS가 존재하지만, SqueeSAR 기법은 관측밀도를 높이는데 기여할 수 있다. 차분간섭도 제작에 필요한 DEM 정확도에 의한 변위분석 결과의 영향을 분석하기 위해 SRTM 1-arc (~30 m)와 1 m LIDAR DEM을 사용한 분석을 수행하였다. 두개의 고도자료를 이용하여 PSInSAR와 SqueeSAR 분석을 수행한 결과 인공구조물과 같은 PS에서는 자료처리에 사용된 DEM 오차를 거의 정확하게 보정할 수 있기 때문에, 사용된 DEM의 정확도와 상관없이 최종 시계열 분석 결과는 동일하였다. 반면, 고정산란체가 아닌 Distributed Scatterer (DS)일 경우 사용된 DEM의 정확도에 따라 영향을 받게 되며, SqueeSAR의 경우 사용된 DEM이 정확할수록 분석 결과가 좋아짐을 확인하였다. 도심지역에서의 변위 관측에서도 SqueeSAR 기법이 PSInSAR 기법에 비해 약 5배 이상의 관측점을 추출하는데 기여했으며, 관측점의 오차도 PSInSAR 결과에 비해 현저하게 개선되었다.

• 대한치과교정학회지
• /
• 제19권1호
• /
• pp.187-200
• /
• 1989

The purpose of this study was to find out the craniofacial skeletal characteristics and to establish standards in facial patterns of Korean adolescences with normal occlusion. The subjects consisted of 54 males and 71 females ranging in age from 12 to 16 years. To classify facial patrons, number the clinical deviations from the normal five key measurements: the facial axis, facial angle, mandibular plane angle, lower face height, mandibular arc, are added and averaged with the proper sign to divide subjects into three groups ; brachyfacial, mesofacial dolichofacial groups. For the comparison of each group, a total of 43 morphologic variables were employed and the data were analyzed by statistical methods. The findings of this study can be summerized as follows; 1. The mesofacial group was $54.4\%$, the brachyfacial group was $29.6\%$ and the dolichofacial group was $16.0\%$ in this subjects. 2. There were no significant differences in size and shape of cranial base among each groups. 3. The brachyfacial group manifested the forward positioned maxilla and mandible to anterior cranial base, smaller cant of the mandibular plane, square shaped mandible, and prominent symphysis as compared with dolichofacial group. 4. There were no significant differences in the cant of the maxilla to the anterior cranial base among each groups. 5. Ramal height and madibular body length of brachyfacial group were larger than those of dolichofacial group. 6. Brachyfacial group indicated the smallest degree in divergency of maxilla and mandible while dolichofacial group showed the largest degree.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1845-1848
• /
• 2005

The automatic $CO_2$ welding is a manufacturing process to produce high quality joints for metal and it could provide a capability of full automation to enhance productivity. Despite the widespread use in the various manufacturing industries, the full automation of the robotic $CO_2$ welding has not yet been achieved partly because the mathematical model for the process parameters of a given welding task is not fully understood and quantified. Several mathematical models to control welding quality, productivity, microstructure and weld properties in arc welding processes have been studied. However, it is not an easy task to apply them to the various practical situations because the relationship between the process parameters and the bead geometry is non-linear and also they are usually dependent on the specific experimental results. Practically, it is difficult, but important to know how to establish a mathematical model that can predict the result of the actual welding process and how to select the optimum welding condition under a certain constraint. In this research, an attempt has been made to develop an intelligent algorithm to predict the weld geometry (top-bead width, top-bead height, back-bead width and back-bead height) as a function of key process parameters in the robotic $CO_2$welding. A sensitivity analysis has been conducted and compared the relative impact of three process parameters on bead geometry in order to verify the measurement errors on the values of the uncertainty in estimated parameters.

• 대한치과교정학회지
• /
• 제44권2호
• /
• pp.77-87
• /
• 2014

Objectives: This study was designed to define the Korean norm values for the Ricketts analysis. Methods: In this longitudinal study, lateral cephalograms of 31 subjects with normal occlusion were taken biennially from ages 9-19 years. Cephalometric measurements were performed. Parameters for which the 10-year change did not exceed one standard deviation were defined as unchanged. The means and standard deviations for the measured parameters were determined for each age group. Results: No significant changes in growth were observed in the molar relationship, incisor overjet, incisor overbite, mandibular incisor extrusion, interincisor angle, lower incisor tip (B1) to A point-Pogonion (A-PO) plane, upper incisor tip (A1) to A-PO plane, B1 inclination to A-PO, A1 inclination to A-PO, B1 inclination to Frankfurt plane (FH), convexity, lower facial height, facial axis, maxillary depth, maxillary height, palatal plane to FH, cranial deflection, ramus Xi position, or porion location. Continual changes over the 10 years of growth were observed in the maxillary first molar distal position to pterygoid true vertical plane, facial depth, mandibular plane to FH, anterior cranial length, mandibular arc, and corpus length. Conclusions: Clinicians can apply the Korean norms at age 9 as determined in this study when using the Ricketts analysis. The patient's age at the beginning of treatment and their sex should be taken into consideration when drawing visual treatment objectives.

• Journal of Biosystems Engineering
• /
• 제12권4호
• /
• pp.31-43
• /
• 1987

This study was performed to develop a hot water boiler system with small scale automatic rice hull furnace for the multi-purpose use in the farm. For the experiment a prototype hot water boiler system with rice hull furnace was fabricated, which was equipped with automatic hull feeder, igniter and ash removal device. Optimum operational conditions of the prototype: system were analyzed. The results arc summarized as follows. 1. The temperature measured right above the burning surface should be higher than $500^{\circ}C$ combustion. 2. The top zone of the combustion chamber was the most suitable location of the thermocouple to pick up the control temperature for the automatic operation of the rice hull furnace. 3. The content of carbon monoxide in the flue gas was increased with the filling height of burning material but it was less than 0.3 percent in volume in this experiment. When the filling height was expressed as the ratio of rice hull feed rate to the volume of the combustion chamber above the burning surface, the optimum ratio was about $150kg/m^3-h$. 4. The combustion efficiency of the prototype was higher than 95 percent when the feed rate was 1.1 to 2.3 kg/h and moisture content of rice hull was 22.4 percent (w.b.) or less. 5. It was estimated that the optimum operational conditions of the system were 1.3 to 2.0 kg/h in feed rate, 70 to 100 percent in excess air and 500 to $510^{\circ}C$ in control temperature. 6. The efficiency of coil heal exchanger increased with a decrease in feed rate of rice hull. When the rice hull feed rates were 1.1, 1.7 and 2.3 kg/h, the efficiencies of coil heat exchanger were about 34, 30 and 25 percent and heat transfer rates were 5.7, 7.6 and 8.8 MJ/h, respectively. When the flat plate heat exchanger was used in addition to the coil heat exchanger, the efficiency of the heat exchanger system increased to 48 percent.

• 자원리싸이클링
• /
• 제28권2호
• /
• pp.40-45
• /
• 2019

전기로 공정은 스크랩을 재활용하여 주원료로 사용하고 아크에 의해 용해하며, 전력을 주 에너지로 사용한다. 슬래그 포밍은 전력에너지 저감에 중요한 요소 기술이다. 투입되는 가탄재(분탄)와 슬래그 중 FeO와의 반응과 용강 중의 카본과 투입되는 산소와의 반응에 의해 CO가스가 발생된다. 이러한 반응에 의해 발생된 CO가스는 슬래그에 포집되어 슬래그 포밍 현상이 일어난다. 전기로 제강 공정에서 일반적으로 가탄재는 가공분탄(무연탄)과 cokes를 사용하고 있다. 본 연구는 전기로 제강 공정에 사용되는 가탄재에 따른 슬래그 포밍의 영향을 조사하였다. 연구 결과 가공분탄 보다는 cokes에 의해 슬래그 포밍 높이가 증가 되었으며, 입도 $500{\mu}m$ 이하의 입자 함량이 증가할수록 포밍높이가 증가하는 결과를 나타내었다. 이러한 결과를 바탕으로 조업에 적용한 결과, 슬래그 포밍높이 증가와 가탄재 원단위 저감, 전력에너지 저감의 효과를 얻었다.

• Steel and Composite Structures
• /
• 제46권4호
• /
• pp.451-469
• /
• 2023

The use of precast hollow-core slabs (PCHCS) in civil construction has been increasing due to the speed of execution and reduction in the weight of flooring systems. However, in the literature there are no studies that present a finite element model (FEM) to predict the load-slip relationship behavior of pushout tests, considering headed stud shear connector and PCHCS placed at the upper flange of the downstand steel profile. Thus, the present paper aims to develop a FEM, which is based on tests to fill this gap. For this task, geometrical non-linear analyses are carried out in the ABAQUS software. The FEM is calibrated by sensitivity analyses, considering different types of analysis, the friction coefficient at the steel-concrete interface, as well as the constitutive model of the headed stud shear connector. Subsequently, a parametric study is performed to assess the influence of the number of connector lines, type of filling and height of the PCHCS. The results are compared with analytical models that predict the headed stud resistance. In total, 158 finite element models are processed. It was concluded that the dynamic implicit analysis (quasi-static) showed better convergence of the equilibrium trajectory when compared to the static analysis, such as arc-length method. The friction coefficient value of 0.5 was indicated to predict the load-slip relationship behavior of all models investigated. The headed stud shear connector rupture was verified for the constitutive model capable of representing the fracture in the stress-strain relationship. Regarding the number of connector lines, there was an average increase of 108% in the resistance of the structure for models with two lines of connectors compared to the use of only one. The type of filling of the hollow core slab that presented the best results was the partial filling. Finally, the greater the height of the PCHCS, the greater the resistance of the headed stud.

• 국제초고층학회논문집
• /
• 제3권3호
• /
• pp.205-214
• /
• 2014

The super high rise building construction is characterized by a large quantity of engineering works and structural components, high demanding of construction technology and complex cross operations. As the height of super high rise building increases, the construction difficulties increase, it is challenging the steel structural building construction technology. In this paper, the key technologies in the construction of Chinese modern super high rise steel structure building have been studied. The innovative tower crane supporting frame suspension disassembly technology has been developed to allow the crane supporting frame to turnover in the air without occupying materials stockyard. A new self-elevating platform technique which is capable of striding over structural barriers has been developed. This new technology allows the platform to be self-elevated along variable cross section column with a maximum 600 mm size change. A new automatic submerged arc welding technology has also been developed to ensure the process continuity and quality stability of welding job on the construction site.

• 한국산학기술학회논문지
• /
• 제6권2호
• /
• pp.110-115
• /
• 2005

표면 경화가 요구되는 소재에 코발트계 합금 분말을 용사 소모재로 하고 플라즈마 트랜스퍼드 아크(PTA) 용사 공정을 이용하여 표면 개질부를 제조하였다. 표면 개질부는 다른 용사 변수는 일정하게 유지한 상태에서 용사 전류만을 변화하여 제조하였다. 용사 전류를 80에서 140 amp까지 20 amp씩 증가하면서 개질층을 제조하였다. 두께가 일정한 모재에 전류를 변화하여 표면 개질층을 제조하는 경우 용사후 모재에서 발생하는 냉각 효과가 다르게 되고 이는 개질층의 폭과 두께 등의 기하학적 형상과 미세 조직, 그리고 미세경도 등의 특성에 영향을 미치는 것으로 나타났다. 용사 전류를 120amp로 사용한 경우 미세조직이 조밀하고 미세경도 값이 가장 높은 값을 나타내는 개질층을 얻을 수 있었다. 전류를 증가함에 따라 개질층의 폭은 증가하지만 높이는 큰 변화가 없는 것으로 나타났다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 C
• /
• pp.1628-1630
• /
• 2002

In this paper, we measured 3-dimensional temporal behavior of the light emitted from discharge cell of plasma display panel(PDP) as a function of the pressure using the scanned point detecting system. The detected light signal through the PM tube is sent on the oscilloscope and oscilloscope which is connected to PC with GPIB. The whole system is controlled by a PC. From the temporal behavior results, we could analyze the discharge behavior of panel with Ne-Xe(4%) mixing gas and 300torr, 400torr, 500torr pressure. The top view of panel shows that the discharge moves from inner edge of cathode electrode to outer cathode electrode forming arc type. At the 300torr, initial emission time is very fast. The side view of panel shows that the light is detected up to $150{\mu}m$ height of barrier rib. In the panel of 300torr, emission distribution is wider than the others.