• Elastomers and Composites
• /
• v.42 no.4
• /
• pp.217-223
• /
• 2007

Thermomechanical and shape memory properties of dicumyl peroxide(DCP) cured semicrystalline EPDM($Nordel^{(R)}$ IP) were investigated. From gel content analysis, it can be seen that Nordel can be crosslinked by small amount of DCP and the degree of crosslinking increased with the increase of DCP content. DSC analysis revealed that the melting temperature and degree of crystallinity of the crosslinked rubber decreased with the increase of DCP. Tensile test showed that tensile modulus increased and elongation at break of the rubber decreased with an increase in the degree of cross linking. The chemically crosslinked semi-crystalline EPDM exhibited excellent shape memory behavior, i.e. the sample was easily deformed to have an arbitrary secondary shape above its melting temperature and was fixed well in its deformed state when it is cooled, and then the fixed shape was recovered to its original shape very fast upon heating above its melting temperature.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.1
• /
• pp.142-149
• /
• 2011

This paper presents a new state of charge(SOC) estimation of large capacity of Li-ion battery (LIB) based on the multiple model adaptive estimation(MMAE) method. We first introduce an equivalent circuit model of LIB. The relationship between the terminal voltage and the open circuit voltage(OCV) is nonlinear and may vary depending on the changes of temperature and C-rate. In this paper, such behaviors are described as a set of multiple linear time invariant impedance models. Each model is identified at a temperature and a C-rate. These model set must be obtained a priori for a given LIB. It is shown that most of impedances can be modeled by first-order and second-order transfer functions. For the real time estimation, we transform the continuous time models into difference equations. Subsequently, we construct the model banks in the manner that each bank consists of four adjacent models. When an operating point of cell temperature and current is given, the corresponding model bank is directly determined so that it is included in the interval generated by four operating points of the model bank. The MMAE of SOC at an arbitrary operating point (T $^{\circ}C$, $I_{bat}$[A]) is performed by calculating a linear combination of voltage drops, which are obtained by four models of the selected model bank. The demonstration of the proposed method is shown through simulations using DUALFOIL.

• Journal of Acupuncture Research
• /
• v.26 no.6
• /
• pp.241-249
• /
• 2009

Objectives : The purpose of this study is to report the patients with compressive neuropathy of the radial nerve(Saturday Night Palsy), who was improved by acupuncture and Sweet Bee Venom(SBV) treatment. Methods & Results : The patients were hospitalized or outpatient in Dept. of Acupuncture & Moxibustion, traditional korean medical hospital, Sangji University from 1st, Dec. 2008 to 30th June 2009, and treated with acupuncture, SBV, electrical stimulation therapy and herbal medication therapy. To evaluate the wrist drop and numbness of fingers, coding result(Arbitrary values used to evaluate result) and digital infrared thermal image, which was well defined diagnostic tool estimating skin surface temperature difference, were used. As a result, patient symptoms were improved remarkably. Conclusions : Patients were treated during 6 weeks in average. 2 cases were excellent and 1 case was evaluated good result by the acupuncture, Sweet Bee Venom, electrical stimulation therapy.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.7 no.4
• /
• pp.599-609
• /
• 1997

The phase behavior and dynamics of colloid suspensions and the resulting structures and properties of powder compacts were examined by a computer experimental method for cooperative packing processes. A wide range of properties and process conditions such as arbitrary particle size, medium densities, field strength, and temperature could be examined using the Peclet number (Pe). We demonstrated that an optimum range of Peclet number for the ordering of sediments was present and that the phenomena related to the ordering such as the onset of crystallization, the phase behavior, etc. strongly depend on process conditions. The present work appears to be useful to design the processing method of ceramic spherical submicron powders for the preparation of high-density green compacts.

• Journal of computational fluids engineering
• /
• v.7 no.3
• /
• pp.17-26
• /
• 2002

Computational fluid dynamic(CFD) analysis has been frequently applied to the waste incinerators to understand the flow performance for various design and operating parameters. Since the computational modeling inevitably requires many simplifications and complicated sub-models, validity of the results should be carefully evaluated. In this study, major computational modeling and procedure of usual simulation methods for the grate-type waste incinerators were assessed. Usual simulation method does not explicitly incorporate the waste combustion, simply by assuming the combustion gas properties from the waste bed which is treated as an inlet plane. However, effect of this arbitrary assumption on the overall flow pattern is not significant, since the flow pattern is dominated by strong pattern of jet flows of the secondary air. Thus, this method is valid in understanding the effect of flow-related parameters. In analyzing the results, deriving conclusive information directly from temperature and chemical species concentration should be avoided, since the model prediction for the gaseous reaction and the radiation reveals significant discrepancies against the actual phenomena. Use of quantitative measures such as residence time is very efficient in evaluating the flow performance.

• Journal of the Korean Institute of Gas
• /
• v.10 no.4 s.33
• /
• pp.52-62
• /
• 2006

In this study, we tried to propose a selection method of release scenarios and a method of consequence analysis at a gas explosion by pipe release. Thus, release rates, damage areas of the facilities, and fatality areas were estimated and analyzed at various release conditions(temperature, pressure, release material, etc). As a results, we could conclude that the rupture was the worst case of release scenarios, and at release rates and damage areas were better estimated by the weighted average method considering a generic failure frequency of the release hole than by an arbitrary selection of the release hole.

• Structural Engineering and Mechanics
• /
• v.56 no.1
• /
• pp.137-156
• /
• 2015

In this paper, an analytical solution of displacement, strain and stress field for rotating thick-walled cylinder made of functionally graded material subjected to the uniform external magnetic field and thermal field in plane strain state has been studied. Stress, strain and displacement field as a function of radial coordinates considering magneto-thermo-elasticity are derived analytically. According to the Maxwell electro-dynamic equations, Lorentz force in term of displacement is obtained in cylindrical coordinates. Also, symmetric temperature distribution along the thickness of hollow cylinder is obtained by solving Fourier heat transfer equation in cylindrical coordinates. Using equation of equilibrium and thermo-mechanical constitutive equations associated with Lorentz force, a second-order inhomogeneous differential equation in term of displacement is obtained and will be solved analytically. Except Poisson's ratio, other mechanical properties such as elasticity modulus, density, magnetic permeability coefficient, heat conduction coefficient and thermal expansion coefficient are assumed to vary through the thickness according to a power law. In results analysis, non-homogeneity parameter has been chosen arbitrary and inner and outer surface of cylinder are assumed to be rich metal and rich ceramic, respectively. The effect of rotation, thermal, magnetic field and non-homogeneity parameter of functionally graded material which indicates percentages of cylinder's constituents are studied on displacement, Von Mises equivalent stress and Von Mises equivalent strain fields.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1668-1672
• /
• 2005

This paper presents the wall following control of a small indoor airship (blimp). The purpose of the wall following control is that a blimp maintains its position and pose and flies along the wall. A blimp has great inertia and it is affected by temperature, atmospheric pressure, disturbance and air flow around blimp. In order to fly indoors, a volume of blimp should be small. The volume of a blimp becomes small then the buoyancy of a blimp should be smaller. Therefore, it is difficult to attach additional equipments on the blimp which are necessary to control blimp. For these reasons, it is difficult to control the pose and position of the blimp during the wall following. In our research, to cope with its defects, we developed new blimp. Generally, a blimp is controlled by using rudders and elevators, however our developed blimp has no rudders and elevators, and it has faster responses than general blimps. Our developed blimp is designed to smoothly follow the wall by using low-cost small ultra sonic sensors instead of high-cost sensors. Finally, the controller is designed to robustly control the pose and position of the blimp which could control in spite of arbitrary disturbance during the wall following, and the effectiveness of the controller is verified by experiment.

• Journal of the Korean Ceramic Society
• /
• v.47 no.1
• /
• pp.19-25
• /
• 2010

Traditional Kr$\ddot{o}$ger-Vink (K-V) notation defines sites in ionic crystals as interstitial or belonging to host ions. It enables description and calculations of combinations of native and foreign defects, including dopants and substituents. However, some materials exhibit inherently disordered partial occupancy of ions and vacancies, or partial occupancy of two types of ions. For instance, the high temperature disordered phases of $Bi_2O_3$, $Ba_2In_2O_5$, $La_2Mo_2O_9$, mayenite $Ca_{12}Al_{14}O_{33}$, AgI, and $CsHSO_4$ are all good ionic conductors and thus obviously contain charged point defects. But traditional K-V notation cannot account for a charge compensating defect in each case, without resorting to terms like "100% substitution" or "Frenkel disorder". the former arbitrary and awkward and the latter inappropriate. Instead, a K-V compatible nomenclature in which the partially occupied site is defined as the perfect site, has been proposed. I here introduce it thoroughly and provide a number of examples.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.321-327
• /
• 2010

A simplified analytical modeling for micro-sized single metal particle combustion in air was conducted in the present study. The metal particle combustion consists of two distinct reaction regimes, ignition and quasi-steady burning, and the thermo-fluidic phenomena in each stage are formulated by virtue of the conservation and transport equations. Reliability of the model is shown by rigorous validation of the method with emphasis laid on the characterizing the commanding parameters. Effects of Initial particle size, initial oxide film thickness, convection, ambient pressure and temperature are examined and addressed with validation.