• 설비공학논문집
• /
• 제26권8호
• /
• pp.351-356
• /
• 2014

Typical trouble patterns in solar thermal systems include working fluid leakage and freezing other than breakdown of pump. A fluid sensor for measuring electric resistance of fluid was developed and installed at the top of the collector piping in order to check the fault of solar system. Working fluid level in the pipe was determined by measuring electric resistance from a fluid sensor. On the base of this, it was confirmed that the fluid sensor diagnoses leakage of fluid. Electric resistance of propylene glycol aqueous solution was measured in the range of $0{\sim}70^{\circ}C$ and 0~40% of concentration. The response surface analysis was performed by using a central composite design, and the regression equation was derived from the relationship between electric resistance, temperature, and concentration. Through the experiment in a real solar system, we can estimate a concentration of working fluid when a pump is not operating and predict a possibility of freezing. Finally, an effective algorithm for trouble shooting was proposed to operate and maintain the solar system.

• 설비공학논문집
• /
• 제16권7호
• /
• pp.630-638
• /
• 2004

Liquid desiccant dehumidification systems have the ability to provide efficient humidity and temperature control while saving the electrical energy requirement for air conditioning as compared to a conventional system. The dehumidifier and the regenerator form the heart of this system. The latent part of the cooling load is overcome using liquid desiccant. The model regenerator has been designed to study the absorption characteristic of the aqueous triethylene glycol (TEG) solution which is in the flow range from 20 to 50 LPM. Also, this system designed that was able to change the height of the regenerator and dehumidifier. Because the effect of performance have different result according the height. The effect of performance factors of the regenerator with inlet solution flow rate, air flow rate, solution concentration, solution temperature, brine temperature, air temperature and inlet air relative humidity have been analyzed. Data obtained are useful for design guidance and performance analysis of the hybrid air conditioning system.

• 농약과학회지
• /
• 제8권1호
• /
• pp.38-45
• /
• 2004

Imidacloprid를 물과 물-토양계에 처리후 광에 노출시켜 광분해 특성을 조사하였다. 물중에서 imidacloprid는 극성화합물로 전환이 빠르게 이루어져서 약제 7일에는 수상대 유기상의 분포비가 80 : 20 이었으며, 이러한 경향은 조사 후 60일까지 지속되었다. 광에 의한 imidacloprid의 대사물인 imidacloprid urea는 노출 1 일차에 0.0112 mg/kg이 검출되었으며, 7일차에는 0.0391 mg/kg로 최고 농도에 도달한 후 감소하여 60일에는 검출되지 않았다. 물-토양계에서 imidacloprid의 농도는 약제처리 7일 후 평형상태에 도달하였으며, 극성화합물로 전환은 7 일간 지속되어 수상과 유기상간 분배비는 80 : 20로 전환되었다. 광에 의하여 imidacloprid의 농도는 약제처리 당일에는 1.6538 mg/kg, 1일에 0.8785 mg/kg으로 감소하여 15일에는 검출한 계 미만으로 검출되지 않았으나, 광분해산물인 imidacloprid urea는 약제 처리 3일에 최고 농도인 0.0259 mg/kg에 도달한 후 감소하였다. 물과 물-토양계에서 imidacloprid는 광에 의하여 분해되어 imidacloprid urea가 생성되는 분해경로를 확인하였다.

• 폴리머
• /
• 제30권6호
• /
• pp.512-518
• /
• 2006

양친성 블록공중합체는 생분해성 고분자인 poly((R)-3-hydroxybutyrie acid), PHB와 친수성 고분자인 poly(ethylene glycol), PEG를 이용하여 제조되었다. 미생물에 의해 생산된 분자량이 수십만인 PHB는 약물전달용 재료로 적합하지 않으므로 산 촉매 가수분해를 통해 분자량이 $3000{\sim}30000$을 가지도록 조절되었다. 공중합체를 수용액에 넣으면, 고분자들은 자기 조립에 의해 친수성인 PEG가 소수성인 PHB를 감싸는 형태의 고분자 미셀을 형성한다. 형성된 고분자 미셀은 생분해성과 생체적합성을 가지면서 생체 내에서 낮은 독성과 환자 친화적인 특성을 가지므로 약물 전달체로의 이용이 가능하다. 양친성 블록 공중합체는 PHB에 PEG를 도입한 것으로 에스테르교환(transesterification) 반응을 통해 유도되었다. PEG는 친수성 블록의 형성과 반응성을 향상시키기 위해 말단의 작용기를 개질한 후 사용되었다. 양친성 블록 공중합체 형성에 대한 열적 특성과 화학적 구조 분석은 DSC, FTIR, $^1H-NMR$을 사용하여 알아보았다. 임계 미셀 농도(critical micelle concentration, CMC)는 고분자 미셀이 형성되는 시점으로 형광 분광기를 사용하여 분석한 결과 $5{\times}10^{-5}g/L$ 부근에서 측정되었다. 수용액 상의 고분자 미셀은 냉동 건조 후, 분말형태의 나노입자를 얻었다. 고분자 미셀의 크기는 dynamic light scattering으로 측정한 결과 약 130 nm 정도로 나타났다. 또한 atomic force microscopy 측정을 통해 크기가 약 130 nm 정도인 구형 입자를 확인하였다. 나노입자가 형성된 고분자 미셀은 소수성 약물을 담지하여 수동적 표적지향형 약물 전달용 수송체로 이용이 가능할 것이다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제26권1호
• /
• pp.20-24
• /
• 2024

Over the past four years, as the COVID-19 pandemic has struck the world, cold chain of COVID-19 vaccination has become a hot topic. In order to overcome the pandemic situation, it is necessary to establish a cold chain that maintains a low-temperature environment below approximately 203K (-70℃), which is the appropriate storage temperature for vaccines, from vaccine suppliers to local hospitals. Usually, cryocoolers are used to maintain low temperatures, but it is difficult for small-scale local distribution to have cryocooler due to budget and power supply issues. Accordingly, in this paper, a cryogenic TSU (Thermal storage unit) system for vaccination cold chain is designed that can maintain low temperatures below -70℃C for a long time without using a cryocooler. The performance of the TSU system according to the energy storage material for using as TSU is experimentally evaluated. In the experiments, four types of cold storage materials were used: 20% DMSO aqueous solution, 30% DMSO aqueous solution, paraffin wax, and tofu. Prior to the experiment, the specific heat of the cold storage materials at low temperature were measured. Through this, the thermal diffusivity of the materials was calculated, and paraffin wax had the lowest value. As a result of the TSU system's low-temperature maintenance test, paraffin wax showed the best low-temperature maintenance performance. And it recorded a low-temperature maintenance time that was about 24% longer than other materials. As a result of analyzing the temperature trend by location within the TSU system, it was observed that heat intrusion from the outside was not well transmitted to the low temperature area due to the low thermal conductivity of paraffin wax. Therefore, in the TSU system for vaccine storage, it was experimentally verified that the lower the thermal diffusivity of the cold storage material, the better low temperature maintenance performance.

• 한국환경과학회지
• /
• 제23권12호
• /
• pp.1987-1998
• /
• 2014

Zeolite was synthesized from power station waste, coal fly ash, as an alternative low-cost adsorbent and investigated for the removal of Sr(II) and Cs(I) ions from single- and binary metal aqueous solutions. In order to investigate the adsorption characteristics, the effects of various operating parameters such as initial concentration of metal ions, contact time, and pH of the solutions were studied in a batch adsorption technique. The Langmuir model better fitted the adsorption isotherm data than the Freundlich model. The pseudo second-order model was found more applicable to describe the kinetics of system. The adsorption capacities of Sr(II) and Cs(I) ions obtained from the Langmuir model were 1.7848 mmol/g and 0.7640 mmol/g, respectively. Although the adsorption capacities of individual Sr(II) and Cs(I) ions was less in the binary-system, the sum of the total adsorption capacity (2.3572 mmol/g) of both ions in the binary-system was higher than the adsorption capacity of individual ion in the single-system. Comparing the homogeneous film diffusion model with the homogeneous particle diffusion model, the adsorption was mainly controlled by the particle diffusion process.

• 대한기계학회논문집B
• /
• 제27권7호
• /
• pp.845-852
• /
• 2003

Liquid desiccant dehumidification system can be used effectively to save energy consumed in air conditioning as an alternative compared with conventional air conditioning systems by reducing latent heat load. The dehumidifier and the regenerator from the heart of this system. The latent part of the cooling load is handled using liquid desiccant. In this study, the experimental regenerator has been designed to study the regeneration characteristics of the aqueous triethylene glycol(TEG) system. The performance factors of the regenerator with finned tube heat exchanger were evaluated by a series of experimental runs. The regeneration process is highly dependent on the liquid desiccant conditions, such as, temperature, concentration and flow rate. In addition, the effects of the inlet air temperature, humidity and flow rate were discussed. Data obtained are useful for design guidance and performance analysis of a regenerator, particularly for a liquid desiccant cooling system.

• Natural Product Sciences
• /
• 제8권2호
• /
• pp.66-70
• /
• 2002

The in vitro anticoagulant and fibrinolytic activities of crude extracts from insects were evaluated in order to find effective therapeutic drugs for the treatment of myocardial and cerebral thrombosis. We prepared three types of extracts (water, methanol and ethylacetate) from 28 insects for use as raw materials for the activity assays. The fibrinolytic activity was tested using the fibrin plate method and the activated partial thromboplastin time and thrombin time were measured for blood clotting activity. With regards to the fibrinolytic system, water extracts of six kinds of insects displayed a remarkable level of activity with a plasmin-like action. The water extracts of [Catharsius molossus, Eupolyphaga sinensis, Huechys sanguinea, Mantidis $o\ddot{o}theca$, Mimela splendens, and Polistes mandarinus (Vespae Nidus)] exhibited the activity. On the other hand, the methanol extracts did not display any fibrinolytic activity. In terms of the coagulation system, an aqueous extract of silkworm Tongchunghacho (Paecilomyces japonica), Oxya japonica japonica and Buthus martensi (Scorpion) increased the clotting time significantly longer (181 times) than the control. These results suggest that crude drugs from insects are useful sources for the development of new drugs for use in treatments involving blood coagulation and fibrinolysis.

• 한국세라믹학회지
• /
• 제43권10호
• /
• pp.635-639
• /
• 2006

Dispersion behavior of the slurries consisted of Pb or Bi-based glass frits, which are used for the fabrication of green sheet as PDP front panel transparent dielectric, was examined in non-aqueous solvent system. Measurements of sedimentation height and viscosity were conducted to determine proper dispersion condition in the various solvent and dispersant system. Azotropic compound and ethyl acetate were used as the solvent and ammonium-type dispersant was applied to the slurries. All slurries were dispersed well in azotropic solvent system involving 20$\sim$50 vol% ethyl acetate at 2$\sim$3 wt% dispersant content. Especially, dispersion behavior was notably improved in the addition of ethyl acetate in the Bi-based frit slurry.

• 한국염색가공학회지
• /
• 제30권4호
• /
• pp.237-244
• /
• 2018

Three super hydrophobic red fluorescence dyes were selected to dye high molecular weight polyethylene fiber. Their absorbance and emission spectra were obtained and Stokes' shift was measured. Fluorescence emission strength of the dyes on the fiber was investigated and therefore Fluoro Red 3 was determined as the best one among those three dyes in this experiment. Dyeing properties and fluorescence intensities were investigated using the Fluoro Red 3 on high molecular weight polyethylene fiber at various dyeing conditions. The optimum concentration of a dispersing agent was appeared at 10wt% in aqueous solution. The best dyeing was obtained at $125^{\circ}C$ for 1 hour. The color fastnesses to the washing and rubbing were as high as ratings 4~5, however, the fastness to light was exhibited ratings 2~3.