• Textile Coloration and Finishing
• /
• v.12 no.6
• /
• pp.389-395
• /
• 2000

A natural colorants was extracted from cherry by 10wt% aqueous acetic acid solution as an extractant. Silk and cotton fabrics were dyed with the cherry extract in the temperature range of $40-80^\circ{C}$ and for the time range of 30-60min. by pre- and post-mordanting with various mordants, their dyeability and fastness were investigated. The natural cherry extract prepared in this study has a maximum absorbance at 520nm. It was found that the optimum dyeing temperature and time were $40^\circ{C}$ and 50min, respectively. The pre-mordanting method was more effective than post-mordanting. All mordants except $SnCl_2\cdot{2H}_2O\;and\;FeSO_4\cdot{7H}_2O$ were effective for silk fabrics. However, the dyeability on cotton fabrics increased in the order of $CrK(SO_4)_2\cdot{12H_2O>(CH_3COO)_2Cu\cdot{H}_2O>CuSO_4\cdot{5H}_2O>AlK(SO_4)_2\cdot{12H}_2O>FeSO_4\cdot{7H}_2O>SnCl_2\cdot{2H}_2O$ among the mordants used in this study Fastness(light, water, washing, perpspiration fastness) on the silk and cotton fabrics increased with using mordants. The post-mordanting using mordant$(CH_3COO)_2Cu\cdot{H}_2O$ among the various mordants in this study gave the best fastness.

• Journal of the Korean Chemical Society
• /
• v.9 no.4
• /
• pp.179-184
• /
• 1965

Korean acid clays and Japanese acid clay were 1 N KCl solution and then their acidities were determined by measuring pH of the filtrates produced. And on examining the effect of neutral salt solution, such as KCl, NaCl, $BaCl_2,\;Pb(NO_3)_2\;and\;CuSO_4$, on the acidity, it was found that the effect decreased in order mentioned above and this situation proved to be in accord with Lyotrope series, i.e., the order of $K^+>Na^+>Ba^{++}>Pb^{++}>Cu^{++}.$ And after adsorbing cation, $Al_2O_3\;and\;Fe_2O_3$ which dissolved out of acid clay were measured, with the result that the amounts dissolved out were nearly proportional to acidity. This result accords with Kobayashi and Yamamoto's theory that the cause for acidity of clays is due to the fact that HCl which is formed initially by exchange of cation reacts with solid clay, and then chlorides dissolved out bring about hydrolysis, then resulting in the second formation of HCl. On measuring the rate which acid clay adsorbed dye in aqueous solution of basic and acid dyes, it was found that acid dye had no relation to acidity, and though it was not adsorbed by acid clay, the adsorption rate of basic dye was proportional to acidity. After adsorbing basic dye, pH was proportional to both acidity of solid acid and its adsorption rate of dye. Hence, it was concluded that the adsorption of basic dye was in accord with adsorption mechanism of neutral salt. This study led to find the acidic cause of solid acid and its adsorption mechanism of dye in aqueous solution.

• Analytical Science and Technology
• /
• v.13 no.2
• /
• pp.173-178
• /
• 2000

A new open-chain ligand containing two phenol groups, 1, 14-Bis (2-hydroxybenzyl)-2, 6, 9, 12-tetraazatetradecane(bsated) was synthesized as its tetrahydrochloride salt and characterized by elemental analysis, mass, infrared and NMR. Its proton dissociation constants ($logK^n{_H}$) and stability constants ($logK_{ML}$) toward $Co^{2+}$, $Ni^{2+}$, $Cu^{2+}$ and $Zn^{2+}$ were determined at $25^{\circ}C$ and 0.10M($KNO_3$) ionic strength in aqueous solution by potentiometry. The X-ray structure of its copper (II) complex [Cu(bsated)]$(ClO_4)_2$ was reported: Monoclinic space group $P2_1/n$, $a=17.856(4){\AA}$, $b=17.709(1){\AA}$, $c=8.539(2){\AA}$, $V=2700(2){\AA}$ with Z=4. Electrochemical studies of [Cu(bsated)]$(ClO_4)_2$ complex in dimethyl sulfoxide (DMSO) solution containing tetrabutylammonium perchlorate (supporting electrolyte) were carried out by cyclic voltammograms (CV) and normal pulse voltammetry (NPV).

• Advances in nano research
• /
• v.5 no.4
• /
• pp.359-372
• /
• 2017

Metallic copper nanoparticles were synthesised by reduction of copper ions in aqueous solution, and metal-metal bonding by using the nanoparticles was studied. A colloid solution of metallic copper nanoparticles was prepared by mixing an aqueous solution of $CuCl_2$ (0.01 M) and an aqueous solution of hydrazine (reductant) (0.2-1.0 M) in the presence of 0.0005 M of citric acid and 0.005 M of n-hexadecyltrimethylammonium bromide (stabilizers) at reduction temperature of $30-80^{\circ}C$. Copper-particle size varied (in the range of ca. 80-165 nm) with varying hydrazine concentration and reduction temperature. These dependences of particle size are explained by changes in number of metallic-copper-particle nuclei (determined by reduction rate) and changes in collision frequency of particles (based on movement of particles in accordance with temperature). The main component in the nanoparticles is metallic copper, and the metallic-copper particles are polycrystalline. Metallic-copper discs were successfully bonded by annealing at $400^{\circ}C$ and pressure of 1.2 MPa for 5 min in hydrogen gas with the help of the metalli-ccopper particles. Shear strength of the bonded copper discs was then measured. Dependences of shear strength on hydrazine concentration and reduction temperature were explained in terms of progress state of reduction, amount of impurity and particle size. Highest shear strength of 40.0 MPa was recorded for a colloid solution prepared at hydrazine concentration of 0.8 M and reduction temperature of $50^{\circ}C$.

• Bulletin of the Korean Chemical Society
• /
• v.18 no.6
• /
• pp.653-656
• /
• 1997

The new unsymmetric $N_6$ ligand 1-amino-13-(2-pyridyl)-3,6,9,12-tetraazatridecane (aptatd) containing one pyridyl group has been synthesized and characterized by EA, IR, and NMR. Its proton association constants $(log K_H^n)$ and stability constants $(log K_{ML})$ for Co(Ⅱ), Ni(Ⅱ), Cu(Ⅱ), and Zn(Ⅱ) ions were determined at 298.1 K and ionic strength 0.100 mol $dm^{-3}$ (KNO₃) in aqueous solution by potentiometry: log $K_H^1$=8.80, log $K_H^2$=8.49, log $K_H^3$=6.84, log $K_H^4$=4.17, log $K_H^5$=3.47; log $K_{ML}(Co^{2+})$=18.00, log $K_{ML}(Ni^{2+})$=21.31, log $K_{ML}(Cu^{2+})$=23.62, log $K_{ML}(Zn^{2+})$=15.60. The X-ray structure of its nickel(Ⅱ) complex [Ni(aptatd)]$(ClO_4)_2$ are reported: orthorhombic space group Pbca, a=15.715(1) Å, b=14.280(2) Å, c=19.443(2) Å, V=4363.4 (9) ų with Z=8. The geometry around nickel is a distorted octahedron with the pyridine nitrogen atom being cis to the nitrogen atom of the terminal primary amine.

• Economic and Environmental Geology
• /
• v.52 no.6
• /
• pp.529-539
• /
• 2019

In this study, heavy metal removal and precipitation characteristics with pH change were studied for artificial acid mine drainage. Artificial acid mine drainage was prepared using sulfates of iron, aluminum, copper, zinc, manganese which contained in acid mine drainage from abandoned mines. The single and mixed five heavy metal samples of Fe, Al, Cu, Zn, and Mn were prepared at initial concentrations of 30 and 70 mg/L. Fe and Al were mostly removed at pH 4.0 and 5.0, respectively, and other heavy metals gradually decreased with increasing pH. Concentration changes with increasing pH show generally similar trend for single and mixed heavy metal samples. The effect of removing heavy metals from aqueous solutions is not related to the initial concentration and depends on the pH change. XRD were used for mineral identification of precipitates and crystallinity of the mineral tended to increase with increasing pH. The precipitates that produced by decreasing the concentration of heavy metals in the aqueous solution composed of Fe-goethite(FeOOH), Al-basaluminite(Al₄(SO₄)(OH)₁₀·4H₂O), Cu-connellite(Cu₁₉(OH)₃₂(SO₄)Cl₄·3H₂O) and tenorite(CuO), Zn-zincite(ZnO), and Mn-hausmannite(Mn₃O₄).

• Clean Technology
• /
• v.28 no.1
• /
• pp.38-45
• /
• 2022

CuCl₂-loaded V₂O₅-WO₃/TiO₂ catalyst showed excellent activity in the catalytic oxidation of elemental mercury to oxidized mercury even under SCR condition in the presence of NH₃, which is well known to significantly inhibit the oxidation activity of elemental mercury by HCl. Moreover, it was confirmed that, when SO₂ was present in the reaction gas together with HCl, excellent elemental mercury oxidation activity was maintained even though CuCl₂ supported on the catalyst surface was converted to CuSO₄. This is thought to be because not only HCl but also the SO₄ component generated on the catalyst surface promotes the oxidation of elemental mercury. However, in the presence of SO₂, the total mercury balance before and after the catalytic reaction was not matched, especially as the concentration of SO₂ increased. In order to understand the cause of this, further studies are needed to investigate the effect of SO₂ in the SnCl₂ aqueous solution employed for mercury species analysis and the effect of sulfate ions generated on elemental mercury oxidation. It was confirmed that SO₂ also promotes NO_x removal activity, which is thought to be because the increase in acid sites by SO₄ generated on the catalyst surface by SO₂ facilitates NH₃ adsorption. The composition change and structure of the components present on the catalyst surface under various reaction conditions were measured by XRD and XRF. These measurement results were presented as a rational explanation for the results that SO₂ enhances the oxidation activity of elemental mercury and the NO_x removal activity in this catalyst system.

• Korean Journal of Materials Research
• /
• v.20 no.12
• /
• pp.661-668
• /
• 2010

Cu(In,Ga)$Se_2$(CIGS) photovoltaic thin films were electrodeposited on Mo/glass substrates with an aqueous solution containing 2 mM $CuCl_2$, 8 mM $InCl_3$, 20 mM $GaCl_3$ and 8mM $H_2SeO_3$ at the electrodeposition potential of -0.6 to -1.0 V(SCE) and pH of 1.8. The best chemical composition of $Cu_{1.05}In_{0.8}Ga_{0.13}Se_2$ was found to be achieved at -0.7 V(SCE). The precursor Cu-In-Ga-Se films were annealed for crystallization to chalcopyrite structure at temperatures of 100-$500^{\circ}C$ under Ar gas atmosphere. The chemical compositions, microstructures, surface morphologies, and crystallographic structures of the annealed films were analyzed by EPMA, FE-SEM, AFM, and XRD, respectively. The precursor Cu-In-Ga-Se grains were grown sparsely on the Mo-back contact and also had very rough surfaces. However, after annealing treatment beginning at $200^{\circ}C$, the empty spaces between grains were removed and the grains showed well developed columnar shapes with smooth surfaces. The precursor Cu-In-Ga-Se films were also annealed at the temperature of $500^{\circ}C$ for 60 min under Se gas atmosphere to suppress the Se volatilization. The Se amount on the CIGS film after selenization annealing increased above the Se amount of the electrodeposited state and the $MoSe_2$ phase occurred, resulting from the diffusion of Se through the CIGS film and interaction with Mo back electrode. However, the selenization-annealed films showed higher crystallinity values than did the films annealed under Ar atmosphere with a chemical composition closer to that of the electrodeposited state.

• Bulletin of the Korean Chemical Society
• /
• v.23 no.6
• /
• pp.824-829
• /
• 2002

New di-N-cyanomethylated tetraaza macrocycle 2.13-bis(cyanomethyl)-5.16-dimethyl-2,6,13,17-tetraazatricyclo[$16.4.0.0^7.12$]docosane $(L^2)$ has been prepared by the reaction of 3, 14-dimethyl-2,6,13,17-tetraazatricyclo $(L^1)$ with bromoacetonitrile. The square-planar complexes $[ML^2](ClO_4)_2(M=Ni(II)$ or Cu(II) can be prepared by the reaction of $L^2$ with the corresponding metal ion in acetonitrile. The cyanomethyl groups of $[ML^2](ClO_4)_2readily$ react with water to $yield[ML^3](ClO_4)_2$ containing pendant amide groups. The trans-octahedral complexes $[ML^4](ClO_4)_2$, in which two imidate ester groups are coordinated to the metal ion, can be also prepared by the reaction of $[ML^2](ClO_4)_2with$ methanol under mild conditions. The hydrolysis and alcoholysis reactions of $[ML^2](ClO_4)_2are$ promoted by the central metal ion, in spite of the fact that the cyanomethyl group is not involved in intramolecular coordination. The reactions are also promoted by a base such as triethylamine but are retarded by an $acid(HClO_4).Interestingly$, the imidate ester groups of $[ML^4]^2$ are unusually resistant to hydrolysis even in 0.1 M $HCIO_4$ or 0.1 M NaOH aqueous solution. Crystal structure of $[NiL^4](ClO_4)_2shows$ that the Ni-N (pendant imidate ester group) bond is rlatively strong; the Ni-N bond distance is shorter then the Ni-N(tertiary) distance and is similar to the Ni-N (secondary) distance.

• Analytical Science and Technology
• /
• v.19 no.2
• /
• pp.131-141
• /
• 2006

Hydrobromic acid salt of a $N_2O_2$ tetradentate ligand, N,N'-bis(2-hydroxybenzyl)-ethylene-diamine ($H-BHE{\cdot}2HBr$) was synthesized. $Br-BHE{\cdot}2HBr$, $Cl-BHE{\cdot}2HBr$, $CH_3-BHE{\cdot}2HBr$ and $CH_3O-BHE{\cdot}2HBr$ having Br, Cl, $CH_3$ and $CH_3O$ substituents at 5-position of the phenol group of $H-BHE{\cdot}2HBr$ were also synthesized. $Nap-BHE{\cdot}2HBr$ having naphthalen-2-ol instead of the phenol group was also synthesized. The potentiometry study in aqueous solution revealed that the proton dissociations of the synthesized ligands occurred in four steps and the order of the calculated overall proton dissociation constants (${\log}{\beta}_p$) of each ligand was Br-BHE < Cl-BHE < H-BHE < Nap-BHE < $CH_3$-BHE < $CH_3O$-BHE. The order showed a similar trend to that of Hammett substituent constants(${\sigma}_P$). The order of the stability constants (${\log}K_{ML}$) was CO(II) < Ni(II) < Cu(II) > Zn(II) > Cd(II) > Pb(II). The order in their stability constants (${\log}K_{ML}$) of each transition metal complex agreed well with that of the overall proton dissociation constants (${\log}{\beta}_p$).