• Journal of Soil and Groundwater Environment
• /
• v.15 no.6
• /
• pp.29-36
• /
• 2010

Several mines including Namil, Solim and Jungbong which are located in the Gyeonggi and Kangwon province have been abandoned and closed since 1980 due to "The promotion policy of mining industry". An enormous amount of mining wastes was disposed without proper treatment, which caused soil pollution in tailing dam and ore-dressing plant areas. However, any quantitative assessment was not performed about soil and water pollution by transporting mining wastes such as acid mine drainage, mine tailing, and rocky waste. In this research, heavy metals in mining wastes were analyzed according to leaching method which used 0.1 N HCl and total solution method which used Aqua-regia to recognize the ecological effect of distance from hot spot. We sampled tailings, rocky wastes and soils around the abandoned mine. Chemical and physical parameters such as pH, electrical conductivity (EC), total organic carbon (TOC), soil texture and heavy metal concentration were analyzed. The range of soil's pH is between 4.3 and 6.4 in the tailing dam and oredressing plant area due to mining activity. Total concentrations of As, Cu, and Pb in soil near ore dressing plant area are 250.9, 249.3 and 117.2 mg/kg respectively, which are higher than any other ones near tailing dam area. Arsenic concentration in tailing dams is 31.0 mg/kg, which is also considered as heavily polluted condition comparing with the remediation required level(RRL) in "Soil environment conservation Act".

• Resources Recycling
• /
• v.20 no.4
• /
• pp.52-57
• /
• 2011

Present paper reports a new method to separate the electrolyte membranes and carbon paper without using ultrasonic waves and stirring. In this method, these were separated from fuel cell membrane-electrode assembly(MEA) using the distilled water, butanol and surfactant by dipping method without the dispersion of catalyst particles. Separated carbon paper catalysts and fuel cell Pt/C catalysts were heated in aqua regia at $80{\sim}85^{\circ}C$ and added to precipitant. After calcination, Pt metal was recovered which might be used in fabricating new fuel cells.

• Journal of Soil and Groundwater Environment
• /
• v.26 no.1
• /
• pp.8-16
• /
• 2021

This study has evaluated the stabilization of As contaminated paddy and cultivated soils by pot experiments for rice and lettuce. Various ratios of limestone (L) and steel slag (S) were mixed with the soils in each pot. The soils were taken from before and after pot experiments, and analyzed for As extracted by sequentially (Wenzel method) and totally (aqua regia method).. Paddy soils amended with L (0.5%) and L (1.0%) + S (1.0%) showed increasing fraction 2 (specifically bound As) compared with control soil. Arsenic concentrations in rice grain grown on the amended soils decreased 14% and 12% compared with those on the control soil, respectively. According to sequential extraction of As in cultivated soils, the fractions 1~3 were decreased due to stabilization of As by the soil amendment, especially for S (1.0%), S (3.0%) and L (1.0%) + S (1.0%). In addition, relatively low As concentrations were found in lettuce grown on amended soils with L (0.5%) and L (1.0%) + S (1.0%). Therefore, it can be suggested that soil amendments with L (0.5%) or L (1.0%) + S (1.0%) were suitable for enhancing stabilization of As in the study area.

• Resources Recycling
• /
• v.31 no.1
• /
• pp.12-20
• /
• 2022

The smelting reduction of spent lithium-ion batteries results in metallic alloys containing Co, Cu, Fe, Mn, Ni, and Si. A process to separate metal ions from the sulfuric acid leaching solution of these metallic alloys has been reported. In this process, ionic liquids are employed to separate Fe(III) and Cu(II). In this study, D2EHPA and Cyanex 301 were employed to replace these ionic liquids. Fe(III) and Cu(II) from the sulfate solution were sequentially extracted using 0.5 M D2EHPA with three stages of cross-current and 0.3 M Cyanex 301. The stripping of Fe(III) and Cu(II) from the loaded phases was performed using 50% (v/v) and 60% (v/v) aqua regia solutions, respectively. The mass balance results from this process indicated that the recovery and purity percentages of the metals were greater than 99%.

• Resources Recycling
• /
• v.31 no.1
• /
• pp.21-28
• /
• 2022

The smelting reduction of spent lithium-ion batteries results in metallic alloys of cobalt, nickel, and copper. To develop a process to separate the metallic alloys, leaching of the metallic mixtures of these three metals with H₂SO₄ solution containing 3% H₂O₂ dissolved all the cobalt and nickel, together with 9.6% of the copper. Cyanex 301 selectively extracted Cu(II) from the leaching solution, and copper ions were completely stripped with 30% aqua regia. Selective extraction of Co(II) from a Cu(II)-free raffinate was possible using the ionic liquid ALi-SCN. Three-stage cross-current stripping of the loaded ALi-SCN by a 15% NH₃ solution resulted in the complete stripping of Co(II). A process was proposed to separate the three metal ions from the sulfuric acid leaching solutions of metallic mixtures by employing solvent extraction.

• Economic and Environmental Geology
• /
• v.48 no.4
• /
• pp.337-349
• /
• 2015

This study has focused on investigation of correlation for As and heavy metals in paddy soil and rice crops sampled in the vicinity of the abandoned Munmyung Au-Ag mine. Soil samples extracted by various methods including aqua regia, 1 M $MgCl_2$, 0.01 M $CaCl_2$ and 0.05 M EDTA were analyzed for As and heavy metals (Cd, Cu, Pb and Zn). Rice grain samples grown on the soils were also analyzed for the same elements to evaluate the relationships between soils and rice crops. According to soil extraction methods, As and heavy metal contents in the soils were decreased in the order of aqua regia > 0.01 M $CaCl_2$ > 1 M $MgCl_2$ > 0.05 M EDTA. In addition to correlation analysis, statistically significant correlation with the four extraction methods (p<0.01) were found in the soil and rice samples. As calculation of biological accumulation coefficients (BACs) of the rice crops for As and heavy metals, the BACs for Cd, Zn and Cu were relatively higher than those for As and Pb. This study also carried out a stepwise multiple linear regression analysis to identify the dominant factors influencing metal extraction rates of the paddy soils. Furthermore, daily intakes of As and heavy metals from regularly consumed the rice grain (287 g/day) grown on the contaminated soils by the mining activities were estimated, and found that Cd and As intakes from the rice reached up to 73.7% and 51.8% for maximum allowance levels of trace elements suggested by WHO, respectively. Therefore, long-term consumption of the rice poses potential health problems to residents around the mine, although no adverse health effects have yet been observed.

• Economic and Environmental Geology
• /
• v.46 no.4
• /
• pp.329-338
• /
• 2013

The objective of this study is to investigate the contents and seasonal variation of arsenic in soils and crop plant(rice) in paddy fields around the abandoned metal mines in Korea. The soils were extracted by various methods including aqua regia, 1 M $MgCl_2$, 0.01 M $CaCl_2$ and 0.05 M EDTA to evaluate the relationships between soils and crop plants(rice). According to correlation analysis, statistically significant correlation with the four methods(p<0.01) were found in soils extracted by various chemical solutions and arsenic contents in soils were decreased in the order of 1M $MgCl_2$ > 0.01M $CaCl_2$ > 0.05 M EDTA. Biological accumulation coefficients(BACs) of rice stalks were higher than those of rice grain, and the coefficients under reducing(August) environment were higher than those under oxidizing conditions(October). Assuming the rice consumption of 315 g/day by farm households in Korea, the amount of daily intake of arsenic were estimated to be 77.8 ${\mu}g/day$. The daily intake of arsenic from the rice estimates up to 65% of ADI(acceptable daily intake) that the FAO/WHO Joint Food Additive and Contaminants Committee has set to evaluate their safeties.

• The Journal of Engineering Geology
• /
• v.23 no.4
• /
• pp.363-373
• /
• 2013

This study investigates the dispersion and behavior of Au and heavy metals in the water system (soil, AMD and stream sediment) at the abandoned Bonjeong gold mine, based on XRD, aqua regia, sequential extraction, and physico-chemical analyses. The XRD analyses targeted quartz and kaolinite in the mine waste soil and quartz and goethite in stream sediment. The physico-chemical analyses of AMD with increasing distance from water system showed that pH increased from 3.00 to 3.19 and Eh decreased from 450 to 396 mV. The Au content in AMD ranged from 0.68 to 0.97 mg/L upstream, but was not detected downstream. The Au content of stream sediment was 13.76 to 22.85 mg/kg. Sequential extraction from stream sediment revealed 10.84% exchangeable (STEP I), 11.09% carbonates (STEP II), 25.53% Fe-Mn oxides (STEP III), 26.62% organic matter (STEP IV), and 24.61% residual (STEP V).

• Analytical Science and Technology
• /
• v.10 no.2
• /
• pp.105-113
• /
• 1997

We investigated the content of heavy metals contained in the soil at an Il-Kwang disused mine in Kyung Nam. Three sampling points were selected, each point was digged to 210 or 240cm, sampled each 30cm depth. After air drying, each sample was digested in aqua regia and then analyzed with an Inductively Coupled Plasma Atomic Emission Spectrometer. We determined the content of Zn, Pb, Cr, Cd, Cu, Mn, and Fe, maximum content of Pb, Cd, and Zn was observed to $(4.6{\pm}0.1){\times}10^3$, 9.4(${\pm}3.6$), and $(2.7{\pm}0.1){\times}10^2{\mu}g/g$ respectively. Mean pH values of soil sampled at No.1, 2, and 3 regions were 3.2, 2.6, and 2.8, respectively. These values are remarkably lower than pH of the conventional standard soil which usually shows pH level around 4.9. At each sampling point, maximum content of heavy metals was observed from 30cm to 60cm depth. The depth profiles of Zn, Cd, Pb, and Cr showed very similar tendencies to each other, but those of Fe, Cu. and Mn showed different tendencies to former ones.

• Journal of Soil and Groundwater Environment
• /
• v.21 no.6
• /
• pp.56-66
• /
• 2016

Generally, the contribution of crop-intake pathway (CIP) is remarkable in human health assessment (HHA) of heavy metal contamination. Although the crop exposure concentrations (Cp) should directly be used for calculating the average daily dose (ADD) of CIP, the soil exposure concentration (Cs) multiplied by soil-crop bio-concentration factor (BCF) has frequently been used instead of using Cp values. Thus, the BCF values are significant in the HHA, and care should be taken to ensure the reasonable acquisition of BCF values. Meanwhile, the BCF values are known to be significantly affected by analytical methods. Nevertheless, they have been calculated from the concentrations of soil and crop analyzed by only one method: total digestion (aqua regia extraction). For this reason, this study was initiated to seek appropriate soil analysis methods for effective computation of the ADD of CIP. The concentrations of 5 metal contaminants (As, Cd, Cu, Pb, and Zn) in 127 soil samples obtained from 4 abandoned metal mine areas were analyzed by several methods including total digestion and partial digestions using 0.1/1 N HCl, 1M $NH_4NO_3$, 0.1 M $NaNO_3$, and 0.01M $CaCl_2$. The heavy metal concentrations in 127 crop samples (rice grains) were analyzed by total digestion as well. Using the concentrations of soils and crops, the BCF values of each contaminant were calculated according to the kind of soil extraction methods applied. Finally, the errors between Cp and $C_s{\times}BCF$ were computed to evaluate the relevance of each method. The results indicate that the partial extraction using 0.1 N and 1 N HCl was superior or equivalent to total digestion. In addition, the 0.1M $NaNO_3$ method combined with total digestion is recommended for improving the reliability of BCF values.