• Bulletin of the Korean Chemical Society
• /
• v.29 no.10
• /
• pp.1911-1914
• /
• 2008

Second-order rate constants (kN) have been measured for Michael-type addition reactions of a series of alicyclic secondary amines to 1-phenyl-2-propyn-1-one (2) in MeCN at 25.0 ${\pm}$ 0.1 ${^{\circ}C}$. All the amines studied are less reactive in MeCN than in $H_2O$ although they are more basic in the aprotic solvent by 7-9 p$K_a$ units. The Bronsted-type plot is linear with $\beta_{nuc}$ = 0.40, which is slightly larger than that reported previously for the corresponding reactions in $H_2O$ ($\beta_{nuc}$ = 0.27). Product analysis has shown that only E-isomer is produced. Kinetic isotope effect is absent for the reactions of 2 with morpholine and deuterated morpholine (i.e., $k^H/k^D$ = 1.0). Thus, the reaction has been concluded to proceed through a stepwise mechanism, in which proton transfer occurs after the rate-determining step. The reaction has been suggested to proceed through a tighter transition state in MeCN than in H2O on the basis of the larger $\beta_{nuc}$ in the aprotic solvent. The nature of the transition state has been proposed to be responsible for the decreased reactivity in the aprotic solvent.

• Journal of the Korean Electrochemical Society
• /
• v.1 no.1
• /
• pp.52-54
• /
• 1998

Polypyrrole (PPy), Poly(N-methyl Pyrrole) (PMPy) and Poly(N-phenyl Pyrrole) (PPhPy) films in acetonitrile (Af and propylene carbonate (PC) have been compared focusing on their different ion and solvent transport behaviors. During the redox reaction of PPy films, cation, anion, and solvent take part in mass transport. Whereas during the redox reaction of PMPy and PPhPy films, anion and solvent transport are dominant but cation transport is negligible. In addition, solvent transport occurs in the same direction with cation transport for PPy films. On the other hand, solvent transport occurs in the opposite direction to anion transport for PMPy films, and it changes its amount and direction with the kind of the dopant anion and the solvent used at electropolymerization for PPhPy films.

• Bulletin of the Korean Chemical Society
• /
• v.28 no.11
• /
• pp.2051-2055
• /
• 2007

The solvent effect on sulfur ylide mediated epoxidation reaction was studied systematically. While higher trans/cis ratio of the epoxide was obtained in the more polar solvent, protic solvent produced the lower trans/ cis ratio than any aprotic solvent.

• Applied Chemistry for Engineering
• /
• v.3 no.4
• /
• pp.579-587
• /
• 1992

It was explored, whether the usual course of the ozonolysis of olefins can be modified with the help of pyridine. In the First step, the ozone oxidation of trans-3-hexene was performed with and without pyridine in the inert solvents n-pentane and dichloromethane. In addition, base catalyzed decompositions of monomeric and polymeric ozonides were also examined to identify the reaction mechanism. The reaction products were identified by modern analytical tools. The results of this work showed that reactions of ozone with olefins in the absence of pyridine in aprotic solvents gave, one hand, dominantly peroxidic products, namely monomeric and polymeric ozonides. The other hand, they in the presence of pyridine gave only the non-peroxidic products, namely propionaldehyde and rearranged propionic acid without peroxidic products. It seems, also, that the pyridine-catalyzed isomerization of the Criegee zwitterion of trans-3-hexene to give propionic acid takes place in the ozone oxidation of trans-3-hexene.

• Bulletin of the Korean Chemical Society
• /
• v.29 no.6
• /
• pp.1149-1156
• /
• 2008

The conformational study on neutral and zwitterionic L-alanines (N-Ala and Z-Ala, respectively) and the transition state (TS) for their interconversion is carried out using ab initio HF and density functional B3LYP methods with the self-consistent reaction field method in the gas phase and in solution. At both the HF and B3LYP levels of theory, the local minimum N1 for N-Ala is found to be most preferred in the gas phase and a weak asymmetric bifurcated hydrogen bond between the amino hydrogens and the carbonyl oxygen appears to play a role in stabilizing this conformation. The local minima N2a and N2b are found to be the second preferred conformations, which seem to be stabilized by a hydrogen bond between the amino nitrogen and the carboxylic hydrogen. The relative stability of the local minimum N2b is remarkably increased in solution than that in the gas phase. The local minimum N2b becomes more stable than the local minimum N2a in most of the solution. On the whole the relative free energies of Z-Ala and TS become more lowered, as the solvent polarity increases. N-Ala prevails over Z-Ala in aprotic solutions but Z-Ala is dominantly populated in ethanol and water. In aprotic solutions, the population of Z-Ala increases somewhat with the increase of solvent polarity. The barrier to Z-Ala-to-N-Ala interconversion increases on the whole with the increase of solvent polarity, which is caused by the increase of stability for Z-Ala.

• Elastomers and Composites
• /
• v.50 no.2
• /
• pp.138-145
• /
• 2015

A series of wholly aromatic poly(hydroxyamide)s(PHAs), containing varying amounts of 2,6-dimethylphenoxy group and quinoxaline ring in the main chain, were synthesized by a direct polycondensation method. The inherent viscosities of the PHAs in either DMAc or DMAc/LiCl solution at $35^{\circ}C$ were found to be in the range of 1.02~1.90 dL/g. In the solubility study, we observed that PHA 1, PHA 2, and PHA 3 were dissolved in aprotic solvents such as DMAc, NMP, DMF, and DMSO with LiCl on heating; however, PHA 4, PHA 5, and PHA 6 could be dissolved in aprotic solvents on heating without LiCl. For poly(benzoxazole)s(PBOs), the 10% and maximum weight loss temperatures were in the range of $582{\sim}622^{\circ}C$ and $630{\sim}659^{\circ}C$, respectively. Residues of PBOs at $900^{\circ}C$ were found to be relatively high, which were in the range of 65.3~70.8%.

• Rapid Communication in Photoscience
• /
• v.4 no.3
• /
• pp.67-69
• /
• 2015

FTIR spectroscopy has been employed to investigate the variation of anion-water hydrogen bonding in 1-butyl 3-methyl imidazolium tetrafluoroborate ([Bmim][$BF_4$]) ionic liquid caused by addition of organic co-solvents with various polarities. The variation was estimated by probing band shape and intensity of the OH stretching vibration of trace water present in ionic liquid at $3400-3800cm^{-1}$. The presence of polar aprotic co-solvent in ionic liquid dramatically reduces the absorptivity of the OH stretch band, indicating that the co-solvent changes the nature of anion-water hydrogen bond drastically, which might be responsible for the reduction of the viscosity of ionic liquid in the presence of the co-solvent.

• Journal of the Korean Chemical Society
• /
• v.18 no.4
• /
• pp.251-258
• /
• 1974

The rate constants for the nucleophilic substitution reactions of substituted benzoyl chlorides with p-nitroaniline in such solvents as acetone, acetonitrile, methanol, ethanol, etc. were conductometrically determined, and the activation thermodynamic parameters were also evaluated. In result, the reaction rates were faster in protic solvents than in aprotic solvent; in the solvents of similar property, the reaction rate in the solvent of the large dielectric constant was faster than that in the solvent of the small dielectric constant. Hammett plots in individual solvents showed the straight lines with positive slope; and we concluded that the reaction occurred via the addition-elimination mechanism.

• Proceedings of the Membrane Society of Korea Conference
• /
• 2004.05a
• /
• pp.166-169
• /
• 2004

Microfiltration membranes were prepared from aromatic polyethersulfone (PES) polymer, using aprotic solvent (N-methyl-2-pyrrolidone, NMP) and non-solvent additive (2-methoxy ethanol, 2-ME) by the phase inversion co-process of the vapor-induced phase inversion (VIPI) and the nonsolvent-induced phase inversion (NIPI). According to the change of the additive amount, the solvent amount and the relative humidity, membrane characterization was studied. The non-solvent additive in casting solution played an important role in membrane morphology. During the vapor-induced phase inversion, the relative humidity led to water sorption on the surface of casting dope at which pore formation was generated. The prepared membranes were characterized by scanning electron microscope observations, measurements of capillary flow porometer and pure water flux (PWP). Also the thermodynamic and kinetic properties of membrane-forming system were studied through coagulation value, light transmittance and viscosity.

• Bulletin of the Korean Chemical Society
• /
• v.9 no.3
• /
• pp.171-175
• /
• 1988

The spectral properties of piroxicam in different solvents are similar to those of its skeletal precursor, HMBDC. The maximum absorption and emission wavelengths strongly depend on the hydrogen bonding ability of the solvent, and it is shown that intramolecular hydrogen bonding between the -OH and the ortho carbonyl group of the parent benzothiazine ring plays an important role in the solvent-dependence of their spectroscopic properties. The fluorescence spectra in aprotic nonpolar solvent exhibit abnormally large Stokes-shifted (${\sim}9,000cm^{-1}$) emission bands in contrast to the spectra in water. In ethanol, dual emission bands with two different fractional components of lifetimes have been observed. These results suggest that the abnormally red-shifted emission is attributed to the proton transferred form of an intramolecularly hydrogen-bonded closed conformer.