• Korean Journal of Adult Nursing
• /
• v.27 no.6
• /
• pp.665-672
• /
• 2015

Purpose: The aims of current study were to assess the inhaler competency and medication adherence, and to identify association of inhaler competency with medication adherence in patients with obstructive lung disease. Methods: We did a secondary analysis of the Hanyang Obstructive Pulmonary Evaluation data in a single institution from June 2014 to April 2015 after an approval of Institutional Review Board. A total of 150 patients with asthma or chronic obstructive lung disease participated in the study. Inhaler competency was evaluated accuracy in each step for using metered dose inhaler. Medication adherence was calculated using actually dispensed doses based on the prescribed inhaler doses. Results: Older adults (${\geq}65$) had lower competency in using inhaler (66.7 vs 83.3, z=-4.52, p<.001) and poorer medication adherence (67.7 vs 91.8, $x^2=14.06$, p<.001) than adults (<65). Inhaler competency was associated with medication adherence (p=.26, p=.001). Surprisingly, more than 50% of patients were current smokers. Conclusion: Inhaler competency and medication adherence were lower in older adults with obstructive lung disease than those in adult-age patients. Therefore, an individual education program for older patients should be developed to improve the rates of proper use of inhalers. Nursing management for obstructive lung disease should focus on developing behavioral intervention strategies for smoking cessation.

• Nuclear Engineering and Technology
• /
• v.54 no.7
• /
• pp.2444-2452
• /
• 2022

The field-programmable gate array (FPGA) is gaining popularity in industrial automation such as nuclear power plant instrumentation and control (I&C) systems due to the benefits of having non-existence of operating system, minimum software errors, and minimum common reason failures. Separate functions can be processed individually and in parallel on the same integrated circuit using FPGAs in comparison to the conventional microprocessor-based systems used in any plant operations. The use of FPGAs offers the potential to minimize complexity and the accompanying difficulty of securing regulatory approval, as well as provide superior protection against obsolescence. Wireless sensor networks (WSNs) are a new technology for acquiring and processing plant data wirelessly in which sensor nodes are configured for real-time signal processing, data acquisition, and monitoring. ZigBee (IEEE 802.15.4) is an open worldwide standard for minimum power, low-cost machine-to-machine (M2M), and internet of things (IoT) enabled wireless network communication. It is always a challenge to follow the specific topology when different Zigbee nodes are placed in a large network such as a plant. The research article focuses on the hardware chip design of different topological structures supported by ZigBee that can be used for monitoring and controlling the different operations of the plant and evaluates the performance in Vitex-5 FPGA hardware. The research work presents a strategy for configuring FPGA with ZigBee sensor nodes when communicating in a large area such as an industrial plant for real-time monitoring.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.3
• /
• pp.742-756
• /
• 2008

Recently, it's increasing to use the applied technology related to the quantitative and qualitative growth of industry area. One of them is software to be used in industry area, and software is the most important part in using the industrial equipments. Therefore, the quality of software in the industrial devices determines the performance of the devices. At this time, it's inspired an evaluation and measurement of software quality to have within industrial equipment, and it's forming the research and development in domestic and foreign. In this paper, we constructed evaluation metrics based on ISO/IEC 12119, the International Standard for the general requirements of software and ISO/IEC 9126-2, the International Standard for the evaluation of software qualify characteristics and sub-characteritics, and for this accomplishment, It has been designed and developed industrial software international standard compatible approval system which approve a quality based on quality test result of industrial software using the ISO/IEC 14598-6 that international standard for organization of evaluation module.

• Journal of radiological science and technology
• /
• v.44 no.3
• /
• pp.261-267
• /
• 2021

As the number of Coronavirus Disease-19 (COVID-19) patients increases in a global pandemic situation, the usefulness of mobile computed tomography (CT) is gaining attention. Currently, mobile CT follows the basic safety and essential performance evaluation criteria of whole-body or limited-view X-ray CT in order to obtain device approval and evaluation in the Republic of Korea. Unlike stationary CT, mobile CT is not operated in shielded areas but rather areas such as intensive care units, operating rooms, or isolation rooms. Therefore, it requires a different basic safety and essential performance evaluation standard than stationary CT. In this study, four derived basic safety evaluation criteria related to electrical, mechanical, and radiation safety were included (dose indication test, protection against stray radiation, safety measures against excessive X-rays, half-value layer measurement); and seven essential performance evaluation criteria were included (tube voltage accuracy, mAs accuracy, radiation dose reproducibility, CT number of water, noise, uniformity, and spatial resolution); total eleven basic safety and essential performance evaluation criteria were selected. This study aims to establish appropriate basic safety and essential performance evaluation criteria for simultaneously obtaining images with diagnostic value and reducing the exposure of nearby patients, medical staff, and radiologic technologists during the use of mobile CT.

• Fire Science and Engineering
• /
• v.27 no.1
• /
• pp.52-59
• /
• 2013

In this study, tests were conducted to establish a fire engine of relay waterproof and utilization in order to maintain the pressure in a situation that require high-pressure water-resistant such as a high-rise building fire, etc. As a result of test on the change of a relay waterproof pressure, the measurement result with the hydrant intake of a fire engine opened has reduced approximately 20 % compared to the measurement result with the hydrant intake closed. Similar efficiency showed in the test result that change the pressure of 2 fire engines respectively to use them more efficiently at a fire fighting activity site. A fire engine operation and utilization is proposed based on this study result in order to cope effectively with a fire site requiring high-pressure stream in a high-rise building fire, etc. by using a fire engine held at present because there is no fire pump with high-pressure stream ability arranged at the fire station and there is no regulation on high-pressure fire-fighting pumps in a type approval and verification technology criterion for a fire engine.

• Journal of Advanced Navigation Technology
• /
• v.23 no.5
• /
• pp.373-379
• /
• 2019

AeroMACS spectrum is a national resource internationally allocated by ITU at WRC-07. AeroMACS is an airport broadband mobile communication infrastructure based on WiMAX-based IEEE 802.16e that enables real-time video, graphics, voice, and high-speed data transmission. With the approval of ICAO's development technology standards in 2008, 50 airports in 11 countries have already completed the testing of D-TAXI or A-SMGCS technology using the AeroMACS infrastructure in 2019, starting in the United States in 2009. With many advantages in safety and convenience in terrestrial telecommunications operations, the system is becoming an area of performance improvement for airport operations in accordance with ICAO's ASBU plan. This paper examines the current status of domestic development of AeroMACS and lists service areas applicable to airlines and operators. It also seeks to promote safe and efficient next-generation airport mobile communication system services by presenting feasible partners management in the mobile area and use of aircraft communication systems for active technology development.

• School Mathematics
• /
• v.7 no.3
• /
• pp.287-301
• /
• 2005

The current knowledge-based society constantly requires teachers to enhance the level of their professional development, which underscores the importance of pre- and in-service teacher training for content do-mains. Most of previous studies designed to investigate the in-service teacher training have been quantitatively conducted with the use of survey analysis and not many efforts have been made to identify any possible weaknesses of teacher training for mathematics education. The present investigation, made to fill the gaps, attempted to describe and interpret teacher training programs for mathematics education using in-depth in-terviews, a form of qualitative research approach. Together with the finding that the degree of classroom teachers' approval for their training was not high for various reasons, the study proposes ways to improve teacher training programs for mathematics education so as to change mathematics classrooms for the better.

• Korean Journal of Construction Engineering and Management
• /
• v.13 no.4
• /
• pp.89-99
• /
• 2012

Urban regeneration projects tingeing the shape of mixed-use development, due to the nature of the business, involve risk factors such as protracted business conflict among participations, subjects, complex approval and permission procedure, frequent policy changes, etc. Therefore, systematic risk management is needed to effectively manage the numerous risk factors that may occur during the process course of project. However, risk management of large and complex development projects such as urban regeneration projects is in the introduction stage yet and somewhat one time risk management plan has been established. Therefore, in this study, in order to systematic risk management of urban regeneration projects inhered numerous risk factors, risk factors for urban regeneration projects through preceding studies and case studies were presented. Also risk factors are classified in accordance with business propulsion phase, by estimating the importance for these, step by step emphasis on managed subjects of risk management was proposed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.10
• /
• pp.471-479
• /
• 2020

In this paper, we analyze features of radical innovative businesses using their patents. Although patents have been used to evaluate outcomes of businesses from the 1980s, it is challenging to use patents for radical innovations. We examined the possibility of taking advantage of patents for an indicator that represents a radical innovation in pharmaceutical industry. To this end, we collected FDA approval data from the U.S. Food and Drug Administration and patent data of 18 pharmaceutical companies. For analysis, we utilized the network centrality analysis and Wilcoxon signed ranked test, which is a non-parametric statistical hypothesis test used to compare two related samples. We observed that a radical innovative company typically cooperates with other research groups, such as universities and companies, and acts as a hub for connectivity in pharmaceuticals. Also, we found that there are differences in centrality between radical firms and non-radical firms. Thus, we expect that the results of this study will help in developing strategies for research and development of pharmaceutical companies and identifying factors affecting radical innovation in the future.

• Fire Science and Engineering
• /
• v.26 no.1
• /
• pp.74-79
• /
• 2012

This study is described for development of the stand-alone smoke and heat detector (SASHD) according to the revised in 2011 type approval and performance inspection code for detector. The main improvement of the revised regulation is source. CMOS microcontroller with nano watt technology is use for development of the workable SASHD over 10 years. The low-power SASHD is developed by using the power-saving sleep mode of microcontroller, by making the low-power source voltage checker, heat detector and smoke detector. The stand-alone detector is developed by smoke and heat detector type for reduce false fire alarm. User can choose type of work between the heat detection mode and smoke & heat detection mode. The SASHD can communicate with each them using RS-485 communication supported from microcontroller. So, this study can develop the SASHD that is able to alarm more wide area when fire occurs and reduce a flash fire alarm.