• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.233-233
• /
• 2000

Direct torque control (DTC) scheme provides a very quick torque response without the complex field-orientation block and inner current regulation loop. DTC is known as an appropriate scheme for high power induction motet drives because it can be used at lower switching frequency. There are two major drawbacks with the application of DTC schemes : one is large current harmonics due to flux drooping in a low speed range, the other is that the inverter switching frequency is varying according to motor parameters and operating speed. Switching devices in the power electronics drives should be supported for relatively high switching frequency. In this paper, a P-type fuzzy controller to realize the variable switching sector scheme and a PID-type fuzzy switching frequency regulator are adopted. A meaningful contribution of this paper is to propose a simple realization scheme of the fuzzy switching frequency regulator. Simulation results show the effectiveness of those propositions.

• 설비공학논문집
• /
• 제13권6호
• /
• pp.532-540
• /
• 2001

The objectives of this study are to analyze the control variables according to condensation occurrence, to find the range in floor surface temperature and frequency of condensation, and to evaluate the control methods through simulations when the radiant heating system is used for cooling. Through the simulation analysis the control methods such as on/off control, variable flow control and outdoor reset with indoor temperature feedback control are evaluated and compared. The results show that the lowest floor surface temperature is around $23^{\circ}C$, the surface condensation can be prevented by controlling indoor humidity within 20g/kg(DA0, and that outdoor reset with indoor temperature feedback control is more appropriate than on/off control and variable flow control with regard to prevention of the condensation and thermal comfort.

• 설비공학논문집
• /
• 제13권11호
• /
• pp.1165-1173
• /
• 2001

The objectives of this study are to analyze the application of radiant floor cooling and to evaluate the control methods through experiments when the radiant heating system is used for cooling. Through the experiment analysis the control methods such as on/off control, variable flow control and outdoor reset with indoor temperature feedback control are evaluated and compared. The cooling curve (reset ratio) is found for radiant cooling, which shows tole relation between outside air temperature and supply water temperature. Comparison of cooling methods shows that outdoor reset with indoor temperature feedback control is more appropriate than on/off control and variable flow control with regard to prevention of the condensation and thermal comfort.

• Journal of Magnetics
• /
• 제21권2호
• /
• pp.273-280
• /
• 2016

In this paper, the peristaltic flow of Psedoplastic fluid with variable viscosity in an asymmetric channel is examined. The bionic effects by means of magnetohydrodynamics (MHD) are taken into account. The assumptions of long wave length and low Reynolds number are taken into account. The basic equations governing the flow are first reduced to a set of ordinary differential equation by using appropriate transformation for variables and then solve by using perturbation method. The effect of physical parameters on the pressure rise, velocity and pressure gradient are illustrated graphically. The trapping phenomenon is analyzed through stream lines. A suitable comparison has also been made as a limiting case of the considered problem.

• 한국정밀공학회지
• /
• 제16권3호통권96호
• /
• pp.215-221
• /
• 1999

The object of the thermal error compensation system in machine tools is improving the accuracy of a machine tool through real time error compensation. The accuracy of the machine tool totally depends on the accuracy of thermal error model. A thermal error model can be obtained by appropriate combination of temperature variables. The proposed method for optimal variable selection in the thermal error model is based on correlation grouping and successive regression analysis. Collinearity matter is improved with the correlation grouping and the judgment function which minimizes residual mean square is used. The linear model is more robust against measurement noises than an engineering judgement model that includes the higher order terms of variables. The proposed method is more effective for the applications in real time error compensation because of the reduction in computational time, sufficient model accuracy, and the robustness.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제15권2호
• /
• pp.61-69
• /
• 2007

This paper deals with fuzzy control with a feedforward compensator to progress both energy saving and coefficient of performance (COP) in a variable speed refrigeration system. Both the capacity and superheat are controlled simultaneously and independently in the system. By adopting the fuzzy theory, the controller design for the capacity and superheat is possible without depending on a dynamic model of the system. Moreover, the feedforward compensator of the superheat can reduce influence of the interfering loop between the capacity and superheat. Some experiments are conducted to design appropriate fuzzy controller by an iteration manner. The results show that the proposed fuzzy controller with the compensator can establish good control performances for the complicated refrigeration system in spite of its inherent strong non-linearity. Also, the fuzzy control performances were investigated by comparing to the model based PI control experimental results to evaluate transient behavior under the control.

• Communications for Statistical Applications and Methods
• /
• 제26권5호
• /
• pp.463-471
• /
• 2019

The variable transformations are useful ways to guarantee the functional relationships in the model. However, the presence of outliers may undermine the accuracy of transformation. This paper deals with response transformations in the partial linear models under the existence of outliers. A new procedure for response transformation and outliers detection is proposed. The procedure uses a sequential method for identifying outliers and dynamic graphical methods for an appropriate transformation. The graphical tools make it possible to catch diagnostic information by monitoring the movement of points in the data. The procedure is illustrated with several examples. Examples show that visual clues regarding the optimal transformation, the fittness of the model and the outlyness of the observations can be checked from the series of plots.

• Communications for Statistical Applications and Methods
• /
• 제6권1호
• /
• pp.107-116
• /
• 1999

We propose a sample design which minimize Bayes risk for cluster smpling in sampling inspection. We treat a pilot sample and an additional sample size as random variable. In addition we compute an appropriate cluster size for handling over-dispersion.

• Communications for Statistical Applications and Methods
• /
• 제13권2호
• /
• pp.267-272
• /
• 2006

A procedure for selecting regressors in the linear regression model is suggested using local influence approach. Under an appropriate perturbation scheme, the effect of perturbation of regressors on the profile log-likelihood displacement is assessed for variable selection. A numerical example is provided for illustration.

• Journal of the Korean Data and Information Science Society
• /
• 제9권2호
• /
• pp.179-188
• /
• 1998

커널형 회귀함수의 추정법 중에서 국소 다항회귀 추정법이 가장 우수한 것으로 알려져 있다. 국소다항회귀 추정법에서도 다른 종류의 커널추정량과 마찬가지로 평활량이 중요한 역할을 한다. 특히 회귀함수가 복잡한 구조를 가질 때 변수평활량(variable band-width)을 사용하는 것이 타당할 것이다. 본 연구에서는 완전자료기저(fully automatic, fully data-driven) 변수평활량 선택법을 제안한다. 이 선택법은 편향과 분산의 예비추정에 필요한 평활량을 교차타당성 방법으로 선택하여 MSE를 추정하고 그 값을 최소화하는 평활량을 택하는 것이다. 제안된 방법의 우수성을 모의실험을 통하여 확인하였다. 그리고 제안된 방법은 자료점이 성긴(sparse)부분에서 생길 수 있는 문제점 즉 X'X의 비정칙성(non-singularity)을 해결할 수 있는 방법이라는 데에도 큰 의미가 있다.