• 한국멀티미디어학회논문지
• /
• 제9권12호
• /
• pp.1628-1635
• /
• 2006

A new frequency-modulated m-sequence correlation technique was described. It has. been seen that the frequency modulation scheme leads to higher signal-to-noise ratio than direct sequencing and less hardware effort than PSK modulation scheme. The operating frequency of the correlation system was deduced. The optimal frequency for the frequency-modulated m-sequence correlation system should be 1.35 times of the center frequency of the transducer. The application of this correlation technique to electromagnetic ultrasonic system was computer-simulated.

• 경영과정보연구
• /
• 제21권
• /
• pp.169-187
• /
• 2007

Today, the principle of competition is being applied to Non-profit sector also. It is necessary for relevant persons in charge to learn the knowledge and technique about marketing technique endlessly in connection with the development of donor out of the development of social welfare resource which is being embossed as main pending problem at the point of time when the role of private sector about welfare service increased and the criterion of competition and evaluation among institutions was introduced. Especially, as for the application of marketing technique to utilize internet to have big marketing potential, the efforts for the realization and application of positive marketing to be suitable for the real situation of each institution is necessary in connection with the donor development of social welfare institution. In this study tried to examine the charge of method to develop donor which is based on the development of information technique and the popularization of internet from the viewpoint of internet marketing and suggest the basic data about the present situation of donor marketing to use the effective scheme for internet marketing.

• Journal of Electrical Engineering and Technology
• /
• 제9권3호
• /
• pp.950-956
• /
• 2014

Special purpose sensor design using MEMS (Micro-Electro-Mechanical Systems) technique is commonly used in Nondestructive Testing (NDT) research for the evaluation of existing structures and for the safety control and requirements. Various sensors and network have been developed for general infrastructures as well as safety-critical applications, e.g., aerospace, defense, and nuclear system, etc. In this paper, one of sensor technique using Fiber Bragg Gratings (FBG) and Finite Element Method (FEM) evaluation is discussed. The experimental setup and data collection technique is also demonstrated. The factors influencing test result and the advantages/limitations of this technique are also reviewed using various methods.

• 한국콘텐츠학회논문지
• /
• 제12권8호
• /
• pp.96-104
• /
• 2012

기존 객체지향 개발 방식과 컴포넌트 개발 방식에서의 재사용성 문제는 모바일 개발에서도 해결해야하는 문제이다. 모바일 어플리케이션에서 기능을 변경하는 것은 모바일 어플리케이션 전체를 업그레이드 할 필요가 있는데, 이는 모바일 어플리케이션이 디바이스 내의 다른 어플리케이션들과 연계된 서비스와의 문제를 발생시킨다. 따라서 모바일 어플리케이션 내에 변경 가능성이 있는 기능들에 대해 재사용성을 고려하여 개발되어야 한다. 본 논문에서는 모바일 어플리케이션이 다양한 요구사항에 대해 재사용성을 높일 수 있는 커스터마이제이션 기법을 제안한다. 가변성 중에 데이터 기반의 가변성을 적용하여 변경을 요구하는 기능에 대해 자동으로 변경될 수 있는 자가적응 커스터마이제이션 기법을 제시한다.

• 한국정보과학회논문지:소프트웨어및응용
• /
• 제29권12호
• /
• pp.895-906
• /
• 2002

분산 웹 애플리케이션에 대한 관심도가 증가함에 따라서 복잡한 분산 프레임워크와 관련된 코드의 작성 없이 비즈니스 코드 작성에 주력할 수 있게 해 주는 서버측 Java 컴포넌트 아키텍처인 EJB에 대한 관심도 또한 증가하고 있는 추세이다. 그러나 이러한 관심도의 증가에도 불구하고 지금까지는 이러한 시스템의 신뢰성 측면에 대한 노력은 미비한 것이 현실이다. 따라서 본 논문에서는 객체지향 시스템 개발에서 소프트웨어의 신뢰성을 높여줄 수 있는 접근법으로 증명되고 있는 DbC 접근법을 EJB 기반 애플리케이션의 정형 명세 작성에 적용하기 위한 명세 기법을 제안한다. 이러한 명세 기법을 통해 개발자들은 EJB 기반 애플리케이션 개발에 있어서 신뢰성 측면의 이점을 얻을 수 있다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.792-793
• /
• 2005

Circuit testing process is very important in IC Manufacturing there are two ways in research for circuit testing improvement. These are ATPG Tool Design and Test simulation application. We are interested in how to use parallel technique such as one-side communication, parallel IO and dynamic Process with data partition for circuit testing improvement and we use one-side communication technique in this paper. The parallel ATPG Tool can reduce the test pattern sets of the circuit that is designed in laboratory for make sure that the fault is not occur. After that, we use result for parallel circuit test simulation to find fault between designed circuit and tested circuit. From the experiment, We use less execution time than non-parallel Process. And we can set more parameter for less test size. Previous experiment we can't do it because some parameter will affect much waste time. But in the research, if we use the best ATPG Tool can optimize to least test sets and parallel circuit testing application will not work. Because there are too little test set for circuit testing application. In this paper we use a standard sequential circuit of ISCAS89.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2004년도 춘계학술발표회
• /
• pp.775-782
• /
• 2004

Recently, the cases which are constructed close by neighboring structure or underground structure are on the increase to get the utmost out of the land exploitation of underground space in the downtown area. As the building becomes larger, the excavation depth is getting deep, and the excavation area is getting, wide too. These are frequent occasions that the application of Strut or Anchor method is difficult, because of site boundary, civil application and the ground condition. Therefore, to solve these problem, we analyze and compare design with measuring data, change the design factor and show the improvement of course through the application of self-supported diaphragm wall using counterfort technique which is a new method. It is expected to be a contribution to the suitable exploitation method of construction.

• KIEAE Journal
• /
• 제17권1호
• /
• pp.5-13
• /
• 2017

Purpose: This study, by comprehensively the characteristics of new Hanok application techniques with the proposed site application technology in the course of the design changes that have been accumulated through Hanok technology development the second stage business, by analyzing the range of reflection, new Considering the direction reflects the efficiency of the new Hanok application techniques. Method: new Hanok application technology, it was been established through research and development of large 1 new Hanok technology it has been proposed through the "site-specific application techniques" and 2 builders and designers "space-time proposed technique" Analysis of the case, at the center of the design changes, the land the body of laws and regulations, the requirements of the public buildings, compared to the construction method and the like for the reduction of construction costs, new Hanok applied technology in the process of change by it There was analyzed whether acceleration on the range and step which is reflected in the design Result: The result of new Hanok applied technology was built through the demonstration build business case, process another major technology, foundation, woodwork, walls, roof, has been reflected in the ceiling construction, the inclusion of items in the proposed technique of construction , it was applied to the main steps in general, except for other construction work landscaping. Application techniques and construction proposal technology research team has presented, show the difference between the scope and method. With significance effort to improve the unreasonable traditional methods of these core processes that can be reflected in the field repeated the construction proposed technique as a result of the utility that can be applied for substantial construction.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2005년도 전기학술대회논문집
• /
• pp.442-447
• /
• 2005

This paper presents an application of overlapping-grid technique for probe feeding simulation. The overlapping grid technique is used to solve contour path problem. In this technique, field interpolation is very important to make communication between two coordinates. By applying overlapping-grid technique, error of contour path in probe feeding simulation is reduced.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 전력전자학술대회 논문집
• /
• pp.171-174
• /
• 1998

The development of the high-frequency induction-heating for 2700kW power range intend to make localization at forging and rolling mill part by technical innovation. And, the development makes to increase our's competitive power at technique, quality and cost. This paper describes the heart of high-frequency induction-heating technique, switching technique, a few problem in common using as an unsatisfied technique, load adjustment technique, system control, diagnostic system, and auto-interface etc.