• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.2
• /
• pp.525-527
• /
• 2005

the multicast services with multiple senders is interested according to the internet services such as multiple audio/video conference services. With the N-plex multicast protocols, multicast session manager is also needed for membership control and session control. RMCP-3 is designed for N:N group communications which is standardizing in ITU-T and supports multiple senders who join sessions. In this paper, we consider requirements of multicast manager for multiplex multicast communication protocol which many a joiner has a role in sender such conference application.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.9B
• /
• pp.1616-1623
• /
• 1999

This paper describes error resilient coding scheme is added in WLL system and its application for robust low-bit rate still image transmission over power controlled W-CDA system Rayleigh fading channels. The baseline JPEG compressing methods are uses in image coding over wireless channel. The channel uses Reed-Solomon(RS) outer codes concatenated with convolutional inner codes, and truncated type I hybrid ARQ protocol based on the selective repeat strategy and the RS error detection capability. Simulation results are proved for the statistics of the frame-error bursts of the proposed system in comparison with conventional WLL system. it gains the 2 dB of the Eb/No in same BER.

• Journal of Sensor Science and Technology
• /
• v.21 no.2
• /
• pp.103-108
• /
• 2012

Radiofrequency(RF) signal is a key medium to the most of the present wireless communication devices including RF identification devices(RFID) and smart sensors. However, the most critical barrier to overcome in RFID application is in the failure rate in detection. The most notable improvement in the detection was from the introduction of EPC Class1 Gen2 protocol, but the fundamental problems in the physical properties of the RF signal drew less attention. In this work, we focused on the physical properties of the RF signal in order to understand the failure rate by noting the existence of the ground planes and noise sources in the real environment. By using the mathematical computation software, Maple, we simulated the distribution of the electromagnetic field from a dipole antenna when ground planes exist. Calculations showed that the dark area can be formed by interference. We also constructed a test system to measure the failure rate in the detection of a RFID transponder. The test system was composed of a fixed RFID reader and an EPC Class1 Gen2 transponder which was attached to a scanner to sweep in the x-y plane. Labview software was used to control the x-y scanner and to acquire data. Tests in the laboratory environment showed that the dark area can be as much as 43 %. One who wants to use RFID and smart sensors should carefully consider the extent of the dark area.

• Environmental Engineering Research
• /
• v.19 no.3
• /
• pp.205-214
• /
• 2014

Petroleum a vital commodity affecting every aspect of 21st century. Toxicity and adverse effects of sulphur as catalyst in petroleum products is of great concern required development of techniques for desulphurization in compliance with the International standards. Installation of desulphurizing units costs over $200 million per unit placing economic burden on developing countries like Pakistan. Present study analysis of commercial fuels (station petrol and jet fuel JP8) on gas chromatography-mass spectrometry (GC-MS) identified sulphur concentration of 19.94 mg/L and 21.75 mg/L, respectively. This scenario urged the researcher to attempt synthesis of material that is likely to offer good adsorption capacity for sulphur. Following protocol of sol-gel method, transition metals (Ni, Cu, Zn) solution is gelated with tetraethoxysilane (TEOS; silica precursor) using glycerol. Fourier transform infrared spectroscopy (FTIR) spectra revealed bonding of Zn-O, Cu-O, and Ni-O by stretching vibrations at $468cm^{-1}$, $617cm^{-1}$, and $468cm^{-1}$, respectively. Thiophene and Benzothiophene mixed in n-heptane and benzene (4:1) for preparation of Model Fuels I and II, respectively. Each of silica based metal was applied as adsorbent in batch mode to assess the removal efficiency. Results demonstrated optimal desulphurization of more than 90% following efficacy order as Si-Ni > Si-Zn > Si-Cu based adsorbents. Proposed multilayered (Freundlich) adsorption mechanism follows ${\pi}$-complexation with pseudo secnd order kinetics.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.12
• /
• pp.1792-1798
• /
• 2017

Event Data Recorder(Car Black-Box) with WiFi dongle have been released, and the platform of the majority is the Linux platform. This is because the platform development is possible in little investment cost by reducing the source licensing costs by taking advantage of the open source. But utilizing Linux platform has the limitations of boot-up time and consuming processing power due to the limitation of battery capacity, to be cost-competitive to minimize the use of memory. In this paper, the real-time operating system(RTOS) is utilized to optimize these portions. MP4 encoder and Muxer are developed to be about ten seconds boot up and minimized memory. It has the advantages of operating at lower power consumption than the Linux utilizing WiFi dongle. Utilizing a WiFi dongle is to provide a progressive download feature on smart phones to lower product prices. But RTOS has the weakness in WiFi. Porting TCP /IP, Web and DHCP server and combination with the USB OTG Host interface by implementing the protocol stack are developed for WiFi. And also SPI NOR flash memory is utilized for faster boot time and cost reductions, low processing power to be consume. As the results, the developed proved the 10 seconds booting time, 24 frame rate/sec. and 10% lower power consumption.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.29 no.11
• /
• pp.96-101
• /
• 2015

In recent years, researches regarding optimal placement of CCTV(Closed-circuit Television) cameras via architecture modeling has been conducted. However, for analyzing surveillance coverage through actual human movement, the application of VA(Video Analytics) function of IP(Internet Protocol) cameras has not been studied. This paper compares two methods using data captured from real-world cameras and data acquired from a virtual environment. In using real cameras, we develop GUI(Graphical User Interface) to be used as a logfile which is stored hourly and daily through VA functions and to be used commercially for placement of products inside a shop. The virtual environment was constructed to emulate an real world such as the building structure and the camera with its specifications. Moreover, suitable placement of the camera is done by recognizing obstacles and the number of people counted within the camera's range of view. This research aims to solve time and economic constraints of actual installation of surveillance cameras in real-world environment and to do feasibility study of virtual environment.

• Proceedings of the Korean Information Science Society Conference
• /
• 2010.06b
• /
• pp.236-240
• /
• 2010

u-러닝시스템의 개발과 활용은 유비쿼터스 컴퓨팅 환경의 발달에 따른 미래교실에서의 교육 및 학습 환경을 실현하기 위한 기술적 노력을 의미한다. 본 연구에서 다루고자 하는 u-러닝시스템이 높은 수준의 유비쿼터스 학습을 구현하기 위해서는 학교에서 뿐만 아니라 가정에서도 학습할 수 있는 u-러닝환경을 구축할 수 있어야 하는데, 현재 u-러닝 시스템 구축을 통한 미래교육 연구는 광범위한 관심과 보급에도 불구하고 u-러닝시스템 활성화의 한계를 도출하고 있다. 즉, 현재 다양한 플랫폼 하에서 운영되고 있는 모바일 기기 환경에서 기존의 콘텐츠를 활용하기 위해서는 여전히 u-러닝 지원을 위한 단말기의 안정성이 떨어질 뿐만 아니라 u-러닝을 안정적으로 지원하는 기반 시스템이 적절하게 개발 보급되지 못하고 있는 실정이며 사용자의 편의성이 떨어져 u-러닝 환경에 적합하지 못한 경우가 많다. 따라서 본 연구는 이와같은 u-러닝시스템의 기반기술 구축에 필수적인 기술적 요소를 보완하기 위하여 오픈소스를 포함한 다양한 운영체제의 환경에서 윈도우 운영체제 기반 애플리케이션 사용이 가능한 Remote Desktop Protocol을 통한 가상화 기술을 구현하여 u-러닝시스템의 컴퓨팅 성능을 보다 효율적으로 증대시킬 수 있는 네트워크 시스템을 구현하고 타 시스템과의 성능평가를 수행한다.

• The KIPS Transactions:PartD
• /
• v.15D no.5
• /
• pp.699-704
• /
• 2008

By the dependence on Web from popularization of internet and increasing number of users, web services capability and security problem of communication is becoming a great issue. Existing web services technology decrease the capability of web application server by limiting the number of synchronous client, decreasing the processing load and increasing average response time. The encryption process to secure communication and the early expense of handshake decrease transmission speed and server capability by increasing the calculation time for connecting. Accordingly, this paper executes an encryption procedure by elliptical encryption algorithm to satisfy secure demands, improve the overload of server for web services and get reliability and security of web server architecture and proposes an improved mobile web sever which provides better ability and the techniques for deferred processing.

• Journal of Information Processing Systems
• /
• v.16 no.3
• /
• pp.699-717
• /
• 2020

Propagation time on permissionless blockchain plays a significant role in terms of stability and performance in the decentralized systems. A large number of activities are disseminated to the whole nodes in the decentralized peer-to-peer network, thus causing propagation delay. The stability of the system is our concern in the first place. The propagation delay opens up opportunities for attackers to apply their protocol. Either by accelerating or decelerating the propagation time directly without proper calculation, it brings numerous negative impacts to the entire blockchain system. In this paper, we thoroughly review and elaborate on several parameters related to the propagation time in such a system. We describe our findings in terms of data communication, transaction propagation, and the possibility of an interference attack that caused an extra propagation time. Furthermore, we present the influence of block size, consensus, and blockchain scalability, including the relation of parameters. In the last session, we remark several points associated with the propagation time and use cases to avoid dilemmas in the light of the experiments and literary works.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2002.04b
• /
• pp.1483-1486
• /
• 2002

Multicast protocols are efficient methods of group communication, but they do not support the various transmission protocol services like a reliability guarantee, FTP, or Telnet that TCPs do. The purpose of this dissertation is to find a method to utilize sewer routers to form multicasts that can simultaneously transport multicast packets and TCP packets. For multicast network scalability and error recovery the existing SRM method has been used. Three packets per TCP transmission control window size are used for transport and an ACK is used for flow control. A CBR and a SRM is used for UDP traffic control. Divided on whether a UDP multicast packet and TCP unicast packet is used simultaneously or only a UDP multicast packet transport is used, the multicast receiver with the longest delay is measured on the number of packets and its data receiving rate. It can be seen that the UDP packet and the TCP's IP packet can be simultaneously used in a server router.